|
|
Datasheet LT3062 Equivalent ( PDF ) |
| N.º | Número de pieza | Descripción | Fabricantes | Category |
| 1 | LT3062 | 200mA LDO LT3062 45V VIN, Micropower, Low Noise, 200mA LDO
Features
n Input Voltage Range: 1.6V to 45V n Output Current: 200mA n Quiescent Current: 45µA n Dropout Voltage: 300mV n Low Noise: 30µVRMS (10Hz to 100kHz) n Adjustable Output (VREF = 600mV) n Output Tolerance: ±2% Over Load, Line, and
Tem |  Linear | data |
LT3 Datasheet ( Hoja de datos ) - resultados coincidentes |
| N.º | Número de pieza | Descripción | Fabricantes | Catagory |
| 1 | LT3003 | 3-Channel LED Ballaster
FEATURES
■ ■ ■ ■ ■ ■ ■ ■
LT3003 3-Channel LED Ballaster with PWM DESCRIPTION
The LT®3003 drives three separate strings of LEDs up to 350mA/channel with 3% accurate current matching, resulting in uniform LED brightness and intensity. This approach is superior to  Linear Technology led | | |
| 2 | LT3007 | Low Dropout Fault Tolerant Linear Regulators FEATURES
n FMEA Fault Tolerant: Output Stays at or Below Regulation Voltage During
Adjacent Pin Short or if a Pin Is Left Floating n Ultralow Quiescent Current: 3µA n Input Voltage Range: 2.0V to 45V n Output Current: 20mA n Dropout Voltage: 300mV n Adjustable Output (VADJ = VOUT(MIN) = 600 Linear regulator | | |
| 3 | LT3008 | 45V Low Dropout Linear Regulator
LT3008 3µA IQ, 20mA, 45V Low Dropout Linear Regulator DESCRIPTION
The LT®3008 is a micropower, low dropout voltage (LDO) linear regulator. The device supplies 20mA output current with a dropout voltage of 300mV. No-load quiescent current is 3μA. Ground pin current remains at Linear Technology regulator | | |
| 4 | LT3009 | 20mA Low Dropout Linear Regulators
LT3009 Series 3µA IQ, 20mA Low Dropout Linear Regulators DESCRIPTION
The LT®3009 Series are micropower, low dropout voltage (LDO) linear regulators. The devices supply 20mA output current with a dropout voltage of 280mV. No-load quiescent current is 3μA. Ground pin current re Linear Technology regulator | | |
| 5 | LT3010 | Low Dropout Micropower Linear Regulator
LT3010/LT3010-5 50mA, 3V to 80V Low Dropout Micropower Linear Regulator
FEATURES
s s s s s s s s s s s
DESCRIPTIO
s s s
U APPLICATIO S
s s s s
Wide Input Voltage Range: 3V to 80V Low Quiescent Current: 30µA Low Dropout Voltage: 300mV Output Current: 50mA Thermally Enhanced Linear Technology regulator | | |
| 6 | LT3010-5 | Low Dropout Micropower Linear Regulator
LT3010/LT3010-5 50mA, 3V to 80V Low Dropout Micropower Linear Regulator
FEATURES
s s s s s s s s s s s
DESCRIPTIO
s s s
U APPLICATIO S
s s s s
Wide Input Voltage Range: 3V to 80V Low Quiescent Current: 30µA Low Dropout Voltage: 300mV Output Current: 50mA Thermally Enhanced Linear Technology regulator | | |
| 7 | LT3011 | 3V to 80V Low Dropout Micropower Linear Regulator
FEATURES
n n n n n n n n n n n n n n
LT3011 50mA, 3V to 80V Low Dropout Micropower Linear Regulator with PWRGD DESCRIPTION
The LT®3011 is a high voltage, micropower, low dropout linear regulator. The device is capable of supplying 50mA of output current with a dropout voltage Linear Technology regulator | | |
| 8 | LT3012 | 4V to 80V Low Dropout Micropower Linear Regulator
FEATURES
n n n n n n n n n n n n n
LT3012 250mA, 4V to 80V Low Dropout Micropower Linear Regulator DESCRIPTION
The LT®3012 is a high voltage, micropower low dropout linear regulator. The device is capable of supplying 250mA of output current with a dropout voltage of 400mV. De Linear Technology regulator | | |
| 9 | LT3012B | 4V to 80V Low Dropout Micropower Linear Regulator
LT3012B 250mA, 4V to 80V Low Dropout Micropower Linear Regulator
FEATURES
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
DESCRIPTIO
U APPLICATIO S
■ ■ ■ ■
Wide Input Voltage Range: 4V to 80V Low Quiescent Current: 40µA Low Dropout Voltage: 400mV Output Current: 250 Linear Technology regulator | |
| Esta página es del resultado de búsqueda del LT3062. Si pulsa el resultado de búsqueda de LT3062 se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin. |
nuevas actualizaciones
| Número de pieza | Descripción | Fabricantes | |
| SPS122 | Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use. |
 Sanken |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Sitemap |