|
|
Datasheet CCM02-2512 Equivalent ( PDF ) |
N.º | Número de pieza | Descripción | Fabricantes | Category |
1 | CCM02-2512 | Connector
CCM02 MK II
EMVTM compatible
The CCM02 MK II connectors with landing contacts are dedicated for applications where the reader usage is high and the life span of the card is a key consideration. A connector with contacts which land on the card, rather than slide over it, should | ITT Industries | connector |
CCM Datasheet ( Hoja de datos ) - resultados coincidentes |
N.º | Número de pieza | Descripción | Fabricantes | Catagory |
1 | CCM-1620 | Display Module ETC display | | |
2 | CCM-202B | Alphanumeric LCD CCM-202B Specifications
Display contents : 20 Characters × 2 Lines Character format : 5 × 8 dots Driving duty : 1/16D Provided version : TN, STN Reflective With EL or LED EL/100VAC, 400Hz; LED/4.2VDC
Block Diagram
Absolute Maximum Ratings
Item
Power Supply Voltage LCD Driving Voltage Input Volta Shenzhen Creation data | | |
3 | CCM-2040 | Character Display Module Contacts:
TELCONA AG,Head Office: Höri, Switzerland TELCONA AG,Sales Office: Sinsheim, Germany TELCONA AG,Sales Office: Lésigny, France Tel.++41-1-860 2550 Tel.++49-7261-655 388 Tel.++33-1-60 34 28 28 Fax.++41-1-860 2822 www.telcona.com Fax.++49-7261-655 389 Fax ++33-1-60 34 28 29
Contacts:
TELCO Telcona AG display | | |
4 | CCM-2040 | LCD Module ME DISPLAYS
SPECIFICATIONS FOR LCD MODULE CCM2040
MICRO ELECTRONICS CORPORATION 3375 Scott Blvd. Suite 222 Santa Clara CA 95054 Tel: 408-988-1101 Fax: 408-988-7626 Email: [email protected] Http://www.microelect.com
ME DISPLAYS
• FEATURES Number of Characters Display Font Built-in Controller Micro Electronics lcd | | |
5 | CCM01 | Snap in boardlocks hold the connector in place prior to soldering
CCM01 MK I
CCM01 MK I connectors have fixed contacts and a blade card detection switch unsealed. These connectors are intended for applications where the card usage is relatively low and the environment is benign. Features • Available with 8 through hole contacts. • A norm ITT Industries connector | | |
6 | CCM01-xxx | Smart Card Interconnect Devices Smart Card Interconnect Devices
CCM01 Reverse version MK I: MK I connectors have fixed contacts and a blade shown Fig. 1 Fig. 2 card detection switch un58.0 sealed. These connectors are intended for applications where the card usage is relatively low and the environment is benign. MK II: EMV™ Comp ITT data | | |
7 | CCM02 | CCM02
CCM02 MK I
CCM02 MK I is a connector with landing contacts. Features • Available with 8 through hole contacts. • 100,000 card insertion cycles. • The contacts do not touch the card until it is almost fully inserted a minimal wiping action removes any non-conductive materi ITT Industries data | |
Esta página es del resultado de búsqueda del CCM02-2512. Si pulsa el resultado de búsqueda de CCM02-2512 se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin. |
Número de pieza | Descripción | Fabricantes | |
SPS122 | Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use. |
Sanken |
DataSheet.es | 2020 | Privacy Policy | Contacto | Sitemap |