|
|
Datasheet AD834 Equivalent ( PDF ) |
N.º | Número de pieza | Descripción | Fabricantes | Category |
1 | AD834 | 500 MHz Four-Quadrant Multiplier Data Sheet
500 MHz Four-Quadrant Multiplier AD834
FEATURES
DC to >500 MHz operation
Differential ±1 V full-scale inputs
Differential ±4 mA full-scale output current
Low distortion (≤0.05% for 0 dBm input)
Supply voltages from ±4 V to ±9 V
Low power (280 mW typical at VS = ±5 V)
APPLICATIONS | Analog Devices | data |
2 | AD8340 | RF Vector Modulator Data Sheet
FEATURES
Cartesian amplitude and phase modulation 700 MHz to 1.0 GHz frequency range Continuous magnitude control of −2 dB to −32 dB Continuous phase control of 0° to 360° Output third-order intercept 24 dBm Output 1 dB compression point 11 dBm Output noise floor −149 dBm/Hz at fu | Analog Devices | data |
3 | AD8341 | 1.5GHz to 2.4GHz RF Vector Modulator Data Sheet
FEATURES
Cartesian amplitude and phase modulation 1.5 GHz to 2.4 GHz frequency range Continuous magnitude control of −4.5 dB to −34.5 dB Continuous phase control of 0° to 360° Output third-order intercept 17.5 dBm Output 1 dB compression point 8.5 dBm Output noise floor −150.5 dBm | Analog Devices | data |
4 | AD8342 | Active Receive Mixer Low Frequency to 3.8 GHz Data Sheet
FEATURES
Broadband RF, LO, and IF ports Conversion gain: 3.7 dB Noise figure: 12.2 dB Input IP3: 22.7 dBm Input P1dB: 8.3 dBm LO drive: 0 dBm Differential high impedance RF input port Single-ended, 50 Ω LO input port Open-collector IF output port Single-supply operation: 5 V at 98 mA Po | Analog Devices | data |
5 | AD8343 | DC-to-2.5 GHz High IP3 Active Mixer FEATURES
High-performance active mixer Broadband operation to 2.5 GHz Conversion gain: 7 dB Input IP3: 16.5 dBm LO drive: –10 dBm Noise figure: 14 dB Input P1dB: 2.8 dBm Differential LO, IF and RF Ports 50 Ω LO input impedance Single-supply operation: 5 V @ 50 mA typical Power-down mode @ 20 μA | Analog Devices | data |
AD8 Datasheet ( Hoja de datos ) - resultados coincidentes |
N.º | Número de pieza | Descripción | Fabricantes | Catagory |
1 | AD800 | Clock Recovery and Data Retiming Phase-Locked Loop a
FEATURES Standard Products 44.736 Mbps—DS-3 51.84 Mbps—STS-1 155.52 Mbps—STS-3 or STM-1 Accepts NRZ Data, No Preamble Required Recovered Clock and Retimed Data Outputs Phase-Locked Loop Type Clock Recovery—No Crystal Required Random Jitter: 20؇ Peak-to-Peak Pattern Jitter: Virtually Elimi Analog Devices data | | |
2 | AD8000 | Ultrahigh Speed Op Amp Data Sheet
1.5 GHz, Ultrahigh Speed Op Amp AD8000
FEATURES
High speed 1.5 GHz, −3 dB bandwidth (G = +1) 650 MHz, full power bandwidth (G = +2, VO = 2 V p-p) Slew rate: 4100 V/μs 0.1% settling time: 12 ns
Excellent video specifications 0.1 dB flatness: 170 MHz Differential gain: 0.02% Differenti Analog Devices data | | |
3 | AD8001 | Current Feedback Amplifier a
800 MHz, 50 mW Current Feedback Amplifier
AD8001
FEATURES Excellent Video Specifications (RL = 150 ⍀, G = +2)
Gain Flatness 0.1 dB to 100 MHz 0.01% Differential Gain Error 0.025؇ Differential Phase Error Low Power 5.5 mA Max Power Supply Current (55 mW) High Speed and Fast Settling 880 MHz, Analog Devices amplifier | | |
4 | AD8002 | Dual 600 MHz/ 50 mW Current Feedback Amplifier Data Sheet
FEATURES
Excellent video specifications (RL = 150 Ω, G = +2) Gain flatness: 0.1 dB to 60 MHz Differential gain error: 0.01% Differential phase error: 0.02°
Low power Maximum power supply current (50 mW): 5.0 mA/amp
High speed and fast settling −3 dB bandwidth (G = +1): 600 MHz −3 dB Analog Devices amplifier | | |
5 | AD8003 | 1.5 GHz Op Amp Data Sheet
FEATURES
High speed 1650 MHz (G = +1) 730 MHz (G = +2, VO = 2 V p-p) 4300 V/µs (G = +2, 4 V step) Settling time 12 ns to 0.1%, 2 V step
Excellent for QXGA resolution video Gain flatness 0.1 dB to 190 MHz 0.05% differential gain error, RL = 150 Ω 0.01° differential phase error, RL = 15 Analog Devices data | | |
6 | AD8004 | Current Feedback Amplifier a
Quad 3000 V/s, 35 mW Current Feedback Amplifier
AD8004
FEATURES High Speed
250 MHz –3 dB Bandwidth (G = +1) 3000 V/s Slew Rate 21 ns Settling Time to 0.1% 1.8 ns Rise Time for 2 V Step Low Power 3.5 mA/Amp Power Supply Current (35 mW/Amp) Single Supply Operation Fully Specified for +5 V Analog Devices amplifier | | |
7 | AD8005 | Current Feedback Amplifier Data Sheet
FEATURES
Ultralow power 400 μA power supply current (4 mW on ±5 VS) Specified for single supply operation
High speed 270 MHz, −3 dB bandwidth (G = +1) 170 MHz, −3 dB bandwidth (G = +2) 280 V/μs slew rate (G = +2) 28 ns settling time to 0.1%, 2 V step (G = +2)
Low distortion/noise � Analog Devices amplifier | |
Esta página es del resultado de búsqueda del AD834. Si pulsa el resultado de búsqueda de AD834 se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin. |
Número de pieza | Descripción | Fabricantes | |
SPS122 | Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use. |
Sanken |
DataSheet.es | 2020 | Privacy Policy | Contacto | Sitemap |