DataSheet.es    


Datasheet ACM0801C Equivalent ( PDF )

N.º Número de pieza Descripción Fabricantes Category
1ACM0801CSPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY

AZ DISPLAYS, INC. SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY PART NUMBER: DATE: ACM0801C September 6, 2005 Page 1 of 11 AZ DISPLAYS, INC. 1. General Specification Interface With Par allel MPU ACM0801C Display Specification Display Mode:P ositive/Transf
AZ Displays
AZ Displays		data
2ACM0801CSPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY

DISPLAYTRONIC XIAMEN ZETTLER ELECTRONICS CO., LTD. SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY ACM0802C SERIES CHARACTER MODULE VER1.2 CUSTOMER APPROVAL APPROVAL CUSTOMER COMMENTS COMPANY CHOP DISPLAYTRONIC ENGINEERING APPROVAL DESIGN BY CHECKED BY APPROVED BY www.DataSheet4U
ZETTLER Electronics
ZETTLER Electronics		data
3ACM0801CSCOMMON MODE CHOKES

RoHS COMMON MODE CHOKES For LAN/Telecom applications High Impedance to minimize common mode noise Excellent EMI performance Surface Mount Standard Operating Temp: 0ºC to +70ºC ACM0801CS All specifications subject to change without notice. ALLIED ACM0801CS 714-665-1140 ALL
Allied Components International
Allied Components International		data


ACM Datasheet ( Hoja de datos ) - resultados coincidentes

N.º Número de pieza Descripción Fabricantes Catagory
1ACM-2012EMC Components

(1/4) 006-01 / 20041012 / e9712_acm.fm EMC Components Common Mode Choke Coils for Signal Line SMD FEATURES • Although greatly miniaturized, this wire-wound chip-type filter maintains the characteristics needed for a common-mode filter. Common-mode impedance is 1000Ω [at 100MHz], so this filter
TDK
TDK		data
2ACM-2520EMC Components

(1/4) 006-01 / 20041012 / e9712_acm.fm EMC Components Common Mode Choke Coils for Signal Line SMD FEATURES • Although greatly miniaturized, this wire-wound chip-type filter maintains the characteristics needed for a common-mode filter. Common-mode impedance is 1000Ω [at 100MHz], so this filter
TDK
TDK		data
3ACM-3225EMC Components

(1/4) 006-01 / 20041012 / e9712_acm.fm EMC Components Common Mode Choke Coils for Signal Line SMD FEATURES • Although greatly miniaturized, this wire-wound chip-type filter maintains the characteristics needed for a common-mode filter. Common-mode impedance is 1000Ω [at 100MHz], so this filter
TDK
TDK		data
4ACM-4532EMC Components

(1/4) 006-01 / 20041012 / e9712_acm.fm EMC Components Common Mode Choke Coils for Signal Line SMD FEATURES • Although greatly miniaturized, this wire-wound chip-type filter maintains the characteristics needed for a common-mode filter. Common-mode impedance is 1000Ω [at 100MHz], so this filter
TDK
TDK		data
5ACM0406CICOMMON MODE CHOKES

RoHS COMMON MODE CHOKES ACM0406CI Common mode choke for power application High Impedance to minimize common mode noise Excellent EMI performance Industrial temperature range: -40ºC to +130ºC . Part Number ACM0406CI OCL @10KHz/0.03V 1-2 3-4 Turns Ratio @10KHz/0.1V 1-2:3-4 1:1±2% 1-2 DCR 3-4
Allied Components International
Allied Components International		data
6ACM0407CICOMMON MODE CHOKES

RoHS COMMON MODE CHOKES ACM0407CI Common mode choke for power application High Impedance to minimize common mode noise Excellent EMI performance Industrial temperature range: -40ºC to +130ºC . Part Number ACM0407CI OCL @10KHz/0.03V 1-2 3-4 Turns Ratio @10KHz/0.1V 1-2:3-4 1:1±2% 1-2 DCR 3-4
Allied Components International
Allied Components International		data
7ACM0408CICOMMON MODE CHOKES

RoHS SMT COMMON MODE CHOKES ACM0408CI Solution based on impedance, size and current Designed DC/DC converters Operating Temperature-25ºC to 120ºC Dielectronic strength: 1000Vrms ACM0408CI 1:1±2% .22mH±35% .22mH±35% 60 60 3.30 AC1000V/1mA/2S All specifications subject to change without
Allied Components International
Allied Components International		data



Esta página es del resultado de búsqueda del ACM0801C. Si pulsa el resultado de búsqueda de ACM0801C se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin.


nuevas actualizaciones

Número de pieza Descripción Fabricantes PDF
SPS122

Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use.

 Sanken
Sanken		 PDF


DataSheet.es    |   2020    |  Privacy Policy  |  Contacto  |  Sitemap