DataSheet39.com

What is 1.5SMC110?

This electronic component, produced by the manufacturer "LGE", performs the same function as "1500 Watts Surface Mount Transient Voltage Suppressor".


1.5SMC110 Datasheet PDF - LGE

Part Number 1.5SMC110
Description 1500 Watts Surface Mount Transient Voltage Suppressor
Manufacturers LGE 
Logo LGE Logo 


There is a preview and 1.5SMC110 download ( pdf file ) link at the bottom of this page.





Total 4 Pages



Preview 1 page

No Preview Available ! 1.5SMC110 datasheet, circuit

1.5SMC SERIES
1500 Watts Surface Mount Transient Voltage Suppressor
SMC/DO-214AB
Features
For surface mounted application in order to optimize
board space
Low profile package
Built-in strain relief
Glass passivated junction
Excellent clamping capability
Fast response time: Typically less than 1.0ps from 0
volt to BV min.
Typical IR less than 1μA above 10V
High temperature soldering guaranteed:
260oC / 10 seconds at terminals
Plastic material used carries Underwriters Laboratory
Flammability Classification 94V-0
1500 watts peak pulse power capability with a 10 x
1000 us waveform by 0.01% duty cycle
Mechanical Data
Dimensions in inches and (millimeters)
Case: Molded plastic
Terminals: Solder plated
Polarity: Indicated by cathode band
Weight: 0.21gram
Maximum Ratings and Electrical Characteristics
Rating at 25 oC ambient temperature unless otherwise specified.
Type Number
Symbol
Value
Units
Peak Power Dissipation at TA=25oC, Tp=1ms ( Note 1)
Power Dissipation on Intinite Heatsink, TA=50oC
PPK
PM(AV)
Minimum 1500
6.5
Watts
W
Peak Forward Surge Current, 8.3 ms Single Half
Sine-wave Superimposed on Rated Load
(JEDEC method) (Note 2, 3) - Unidirectional Only
IFSM
200
Amps
Thermal Resistance Junction to Ambient Air (Note 4)
RθJA
50
oC/W
Thermal Resistance Junction to Leads
RθJL
15
oC/W
Operating and Storage Temperature Range
TJ, TSTG
-55 to + 150
Notes: 1. Non-repetitive Current Pulse Per Fig. 3 and Derated above TA=25oC Per Fig. 2.
2. Mounted on 8.0mm2 (.013mm Thick) Copper Pads to Each Terminal.
oC
3. 8.3ms Single Half Sine-wave or Equivalent Square Wave, Duty Cycle=4 Pulses Per Minute
Maximum.
4. Mounted on 5.0mm2(.013mm thick) land areas.
Devices for Bipolar Applications
1. For Bidrectional Use C or CA Suffix for Types 1.5SMC6.8 through Types 1.5SMC200A.
2. Electrical Characteristics Apply in Both Directions.
http://www.luguang.cn
- 542 -


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for 1.5SMC110 electronic component.


Information Total 4 Pages
Link URL [ Copy URL to Clipboard ]
Download [ 1.5SMC110.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
1.5SMC11The function is Surface Mount Transient Voltage Suppressor. Taiwan SemiconductorTaiwan Semiconductor
1.5SMC11The function is 1500 Watts Surface Mount Transient Voltage Suppressor. LGELGE
1.5SMC11The function is 1500 Watts Surface Mount Transient Voltage Suppressor. LGELGE

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

1.5S     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search