|
|
Número de pieza | LSM9DS1 | |
Descripción | iNEMO inertial module | |
Fabricantes | STMicroelectronics | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de LSM9DS1 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
No Preview Available ! LSM9DS1
iNEMO inertial module:
3D accelerometer, 3D gyroscope, 3D magnetometer
Datasheet - production data
LGA-24L (3.5x3x1.0 mm)
Applications
• Indoor navigation
• Smart user interfaces
• Advanced gesture recognition
• Gaming and virtual reality input devices
• Display/map orientation and browsing
Features
• 3 acceleration channels, 3 angular rate
channels, 3 magnetic field channels
• ±2/±4/±8/±16 g linear acceleration full scale
• ±4/±8/±12/±16 gauss magnetic full scale
• ±245/±500/±2000 dps angular rate full scale
• 16-bit data output
• SPI / I2C serial interfaces
• Analog supply voltage 1.9 V to 3.6 V
• “Always-on” eco power mode down to 1.9 mA
• Programmable interrupt generators
• Embedded temperature sensor
• Embedded FIFO
• Position and motion detection functions
• Click/double-click recognition
• Intelligent power saving for handheld devices
• ECOPACK®, RoHS and “Green” compliant
Description
The LSM9DS1 is a system-in-package featuring a
3D digital linear acceleration sensor, a 3D digital
angular rate sensor, and a 3D digital magnetic
sensor.
The LSM9DS1 has a linear acceleration full scale
of ±2g/±4g/±8/±16 g, a magnetic field full scale of
±4/±8/±12/±16 gauss and an angular rate of
±245/±500/±2000 dps.
The LSM9DS1 includes an I2C serial bus
interface supporting standard and fast mode
(100 kHz and 400 kHz) and an SPI serial
standard interface.
Magnetic, accelerometer and gyroscope sensing
can be enabled or set in power-down mode
separately for smart power management.
The LSM9DS1 is available in a plastic land grid
array package (LGA) and it is guaranteed to
operate over an extended temperature range
from -40 °C to +85 °C.
Part number
LSM9DS1
LSM9DS1TR
Table 1. Device summary
Temperature range [°C]
Package
-40 to +85
LGA-24L
-40 to +85
LGA-24L
Packing
Tray
Tape and reel
March 2015
This is information on a product in full production.
DocID025715 Rev 3
1/72
www.st.com
1 page LSM9DS1
Contents
8.14 INT_CFG_M (30h) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
8.15 INT_SRC_M (31h) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
8.16 INT_THS_L(32h), INT_THS_H(33h) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
9 Package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
9.1 Soldering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
9.2 LGA package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
10 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
DocID025715 Rev 3
5/72
72
5 Page LSM9DS1
Pin description
Table 2. Pin description
Pin #
1
2
3
4
Name
Function
VDDIO(1) Power supply for I/O pins
SCL/SPC I2C serial clock (SCL) / SPI serial port clock (SPC)
VDDIO(2) Power supply for I/O pins
I2C serial data (SDA)
SDA/SDI/SDO SPI serial data input (SDI)
3-wire interface serial data output (SDO)
SPI serial data output (SDO) for the accelerometer and gyroscope
5 SDO_A/G I2C least significant bit of the device address (SA0) for the accelerometer
and gyroscope
6
SDO_M
SPI serial data output (SDO) for the magnetometer
I2C least significant bit of the device address (SA0) for the magnetometer
SPI enable
7
CS_A/G
I2C/SPI mode selection for the accelerometer and gyroscope
(1: SPI idle mode / I2C communication enabled;
0: SPI communication mode / I2C disabled)
SPI enable
8
CS_M
I2C/SPI mode selection for the magnetometer
(1: SPI idle mode / I2C communication enabled;
0: SPI communication mode / I2C disabled)
9 DRDY_M Magnetic sensor data ready
10
INT_M
Magnetic sensor interrupt
11 INT1_A/G Accelerometer and gyroscope interrupt 1
12 INT2_A/G Accelerometer and gyroscope interrupt 2
13 DEN_A/G Accelerometer and gyroscope data enable
14
RES
Reserved. Connected to GND.
15
RES
Reserved. Connected to GND.
16
RES
Reserved. Connected to GND.
17
RES
Reserved. Connected to GND.
18
RES
Reserved. Connected to GND.
19
GND
0 V supply
20
GND
0 V supply
21
CAP
Connected to GND with ceramic capacitor(3)
22
VDD(4)
Power supply
23
VDD(5)
Power supply
24 C1 Capacitor connection (C1 = 100 nF)
1. Recommended 100 nF filter capacitor.
2. Recommended 100 nF filter capacitor.
3. 10 nF (±10%), 16 V. 1 nF minimum value has to be guaranteed under 11 V bias condition.
4. Recommended 100 nF plus 10 µF capacitors.
5. Recommended 100 nF plus 10 µF capacitors.
DocID025715 Rev 3
11/72
72
11 Page |
Páginas | Total 30 Páginas | |
PDF Descargar | [ Datasheet LSM9DS1.PDF ] |
Número de pieza | Descripción | Fabricantes |
LSM9DS0 | iNEMO inertial module | STMicroelectronics |
LSM9DS1 | iNEMO inertial module | STMicroelectronics |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |