M272 Datasheet PDF - Solid State Optronics
Part Number | M272 | |
Description | Relay | |
Manufacturers | Solid State Optronics | |
Logo | ||
There is a preview and M272 download ( pdf file ) link at the bottom of this page. Total 5 Pages |
Preview 1 page No Preview Available ! M272
1 Form B
Solid State Relay
DESCRIPTION
The M272 is a bi-directional, single-pole, single-throw, normally closed multipurpose solid-state relay in a miniature 4-pin small outline
package. It is designed to be a cost-effective replacement of reed relays in low voltage applications. The relay consists of an integrated
circuit that drives two rugged source-to-source depletion type DMOS transistors - optically coupled to a light emitting diode. The output
MOS transistors are protected with free-wheeling diodes that can handle up to 1.5A of inrush current, making the relay ideal for switching
lamps and highly inductive loads.
FEATURES
APPLICATIONS
• 1 Form B (normally closed) SSR
• Low input control power consumption (1.5mA TYP)
• High Load Current Rating (125mA)
• Low on-resistance (3 ohms MAX)
• Ultra miniature 4-pin small outline package
• High input-to-output isolation (1500Vrms MIN)
• Long life/high reliability
• Telecom switching
• Tip/Ring control
• Medical equipment
• Battery monitoring
• Home/Safety security systems
• Meter reading systems
OPTIONS/SUFFIXES*
ABSOLUTE MAXIMUM RATINGS*
• -TR Tape and Reel packing option (2,000 pcs / reel)
NOTE: Suffixes listed above are not included in marking on
device for part number identification.
SCHEMATIC DIAGRAM
PARAMETER
UNIT MIN TYP MAX
Storage Temperature
°C -55
125
Operating Temperature
°C -40
85
Continuous Forward
Current
Peak Forward Current
(1us)
Reverse Input Control
Voltage
Output Power Dissipation
mA
A
V
mW
50
1
5
400
*The values indicated are absolute stress ratings. Functional operation of the
device is not implied at these or any conditions in excess of those defined in
electrical characteristics section of this document. Exposure to Absolute
Ratings may cause permanent damage to the device and may adversely
affect reliability.
APPROVALS
• UL/C-UL Approved: File # E201932
© 2009 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
Page 1 of 5
M272
rev 1.42 (6/25/2009)
|
|
M272
1 Form B
Solid State Relay
DISCLAIMER
Solid State Optronics (SSO) makes no warranties or representations with regards to the completeness and accuracy of this document. SSO
reserves the right to make changes to product description, specifications at any time without further notice.
SSO shall not assume any liability arising out of the application or use of any product or circuit described herein. Neither circuit patent
licenses nor indemnity are expressed or implied.
Except as specified in SSO's Standard Terms & Conditions, SSO disclaims liability for consequential or other damage, and we make no other
warranty, expressed or implied, including merchantability and fitness for particular use.
LIFE SUPPORT POLICY
SSO does not authorize use of its devices in life support applications wherein failure or malfunction of a device may lead to personal injury or
death. Users of SSO devices in life support applications assume all risks of such use and agree to indemnify SSO against any and all
damages resulting from such use. Life support devices are defined as devices or systems which, (a) are intended for surgical implant into the
body, or (b) support or sustain life, and (c) whose failure to perform when used properly in accordance with instructions for use can be
reasonably expected to result in significant injury to the user, or (d) a critical component in any component of a life support device or system
whose failure can be reasonably expected to cause failure of the life support device or system, or to affect its safety or effectiveness.
© 2009 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
Page 5 of 5
M272
rev 1.42 (6/25/2009)
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for M272 electronic component. |
Information | Total 5 Pages | |
Link URL | [ Copy URL to Clipboard ] | |
Download | [ M272.PDF Datasheet ] |
Share Link :
Electronic Components Distributor
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
Part Number | Description | MFRS |
M270DAN01.0 | The function is Color TFT-LCD. AUO | |
M270DAN01.1 | The function is Color TFT-LCD. AUO | |
M270H1-L01 | The function is LCD Module. CMI MEI | |
Semiconductors commonly used in industry:
1N4148 |  
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
M272
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA |