|
|
PDF LC898213XC Data sheet ( Hoja de datos )
| Número de pieza | LC898213XC | |
| Descripción | AF Controller | |
| Fabricantes | ON Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de LC898213XC (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
Ordering number : EN*A2251
LC898213XC
Advance Information
CMOS LSI
AF Controller
http://onsemi.com
Overview
This LSI is AF control LSI. It consists of 1 system of feed back circuit for AF control.
Features
Built-in equalizer circuit using digital operation
- AF control equalize circuit
- Any coefficient can be specified by I2C I/F
I2C Interface
Built-in A/D converter
- Maximum 10-bit
- Input 2 channel
Built-in D/A converter
- 8-bit
- Output 2-channel (Hall offset, Constant current Bias)
Built-in Hall Sensor
- Si Hall sensor
Built-in VGA
- Hall Amp
Built-in OSC
- 48MHz (Frequency adjustment function)
Built-in PWM pulse generator circuit
- PWM circuit for AF control
1-chip motor driver
- Saturation drive H bridge 1 channel
Package
- WL-CSP 11-pin
- Lead-free, halogen-free
Supply voltage
- Logic unit : Internal core (1.7V to 1.98V), AVDD (2.6V to 3.6V)
- Driver unit : VM (2.6V to 3.6V)
WLCSP11, 1.10x2.20
* I2C Bus is a trademark of Philips Corporation.
This document contains information on a new product. Specifications and information
herein are subject to change without notice.
ORDERING INFORMATION
See detailed ordering and shipping information on page 5 of this data sheet.
Semiconductor Components Industries, LLC, 2014
March, 2013
31014HK No.A2251-1/5
1 page  
Package Dimensions
unit : mm
WLCSP11, 1.10x2.20
CASE 567HP
ISSUE O
LC898213XC
PIN A1
REFERENCE
E
2X 0.10 C
2X 0.10 C
0.10 C
0.08 C
NOTE 3
TOP VIEW
SIDE VIEW
11X b
0.05 C A B
0.03 C
e/2
e
C
B
A
12 34 56 7
BOTTOM VIEW
AB
D
A
A1
C
SEATING
PLANE
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. COPLANARITY APPLIES TO SPHERICAL
CROWNS OF SOLDER BALLS.
MILLIMETERS
DIM MIN MAX
A −−− 0.45
A1 0.03 0.13
b 0.15 0.25
D 1.10 BSC
E 2.20 BSC
e 0.566 BSC
RECOMMENDED
SOLDERING FOOTPRINT*
0.566
A1 PITCH
PACKAGE
OUTLINE
e
e/2
0.566
PITCH
11X
0.20
DIMENSIONS: MILLIMETERS
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
ORDERING INFORMATION
Device
LC898213XC-MH
Package
WLP11(2.20X1.10)
(Pb-Free / Halogen Free)
Shipping (Qty / Packing)
5000 / Tape & Reel
ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at
www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no
warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the
application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental
damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual
performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical
experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use
as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in
which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for
any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors
harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or
death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the
part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PS No.A2251-5/5
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet LC898213XC.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| LC898213XC | AF Controller | ON Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |