DataSheet39.com

What is uP6209?

This electronic component, produced by the manufacturer "uPI Semiconductor", performs the same function as "Compact Dual-Phase Synchronous-Rectified Buck Controller".


uP6209 Datasheet PDF - uPI Semiconductor

Part Number uP6209
Description Compact Dual-Phase Synchronous-Rectified Buck Controller
Manufacturers uPI Semiconductor 
Logo uPI Semiconductor Logo 


There is a preview and uP6209 download ( pdf file ) link at the bottom of this page.





Total 23 Pages



Preview 1 page

No Preview Available ! uP6209 datasheet, circuit

uP6209
Compact Dual-Phase
Synchronous-Rectified Buck Controller
General Description
Features
The uP6209 is a compact dual-phase synchronous-rectified
Buck controller specifically designed to deliver high quality
output voltage for high power applications. This part is
capable of delivering up to 60A output current thanks to its
embedded bootstrapped drivers that support 12V + 12V
driving capability. The uP6209 features configurable gate
driving voltage for maximum efficiency and optimal
performance. The built-in bootstrap diode simplifies the
circuit design and reduces external part count and PCB
space.
The output voltage is precisely regulated to internal 0.6V
or external reference voltage from 0.4V to 2.5V. The uP6209
adopts DCR current sensing technique for channel current
balance, over current protection, and output current
indication. The uP6209 offers a regulated 5V voltage with
20mA output current capability for other peripheral circuitry.
A MODE pin programs single- or two- phase operation
making the uP6209 ideally suitable for dual power input
applications like PCIE interfaced graphic cards.
This part features comprehensive protection functions
including over current protection, input/output under voltage
protection, over voltage protection and over temperature
protection.
Other features include adjustable soft start, adjustable
operation function, quick response to step load transient,
and power OK. With aforementioned functions, this part
provides customers a compact, high efficiency, well-
protected and cost-effective solutions. This part comes to
VQFN4x4-24L package.
† Operate with 4.5V ~13.2V Supply Voltage
† Selectable External or Internal 0.6V Reference
† Support Single- and Two- Phase Operation
† 5VCC with 20mA Output Current Capability
† ±2.0% Over Line Voltage and Temperature
† Simple Single-Loop Voltage-Mode Control
† 12V Bootstrapped Drivers with Internal
Bootstrap Diode
† DCR Current Sensing
† Adjustable Operation Frequency form 50kHz to
1MHz Per Phase
† External Compensation
† Adjustable Over Current Protection and Output
Current Indication
† External Reference
† Adjustable Soft Start
† VQFN4x4-24L Package
† RoHS Compliant and 100% Lead (Pb)-Free
Applications
† Middle-High End GPU Core Power
† High End Desktop PC Memory Core Power
† Low Output Voltage, High Power Density DC-DC
Converters
† Voltage Regulator Modules
Pin Configuration
Ordering Information
Order Number Package Type
uP6209AQAG VQFN 4x4-24L
Remark
Note: uPI products are compatible with the current IPC/
JEDEC J-STD-020 and RoHS requirements. They are 100%
matte tin (Sn) plating and suitable for use in SnPb or Pb-
free soldering processes.
18 17 16 15 14 13
PHASE2 19
LGATE2 20
NC 21
VCC 22
LGATE1 23
PHASE1 24
PGND
12 COMP
11 RT
10 NC
9 CSP2
8 CSN2
7 CSN1
123456
VQFN4x4-20
uPI Semiconductor Corp., http://www.upi-semi.com
Rev. F00, File Name: uP6209-DS-F0000
1

line_dark_gray
uP6209 equivalent
uP6209
Functional Pin Description
No. Pin Name Pin Function
Bootstrap Supply for the floating upper gate driver of channel 2. Connect the bootstrap
17
BOOT2
capacitor between BOOT2 pin and the PHASE2 pin to form a bootstrap circuit. The bootstrap
capacitor provides the charge to turn on the upper MOSFET. Typical values for CBOOT range from
0.1uF to 0.47uF. Ensure that CBOOT is placed near the IC.
Upper Gate Driver Output for Channel 2. Connect this pin to the gate of upper MOSFET.
18 UGATE2 This pin is monitored by the adaptive shoot-through protection circuitry to determine when the
upper MOSFET has turned off.
Switch Node for Channel 2. Connect this pin to the source of the upper MOSFET and the
drain of the lower MOSFET. This pin is used as the sink for the UGATE2 driver. This pin is also
19 PHASE2 monitored by the adaptive shoot-through protection circuitry to determine when the upper
MOSFET has turned off. A Schottky diode between this pin and ground is recommended to
reduce negative transient voltage which is common in a power supply system.
Lower Gate Driver Output for Channel 2. Connect this pin to the gate of lower MOSFET.
20 LGATE2 This pin is monitored by the adaptive shoot-through protection circuitry to determine when the
lower MOSFET has turned off.
21
VCCDRV
Driver for External Linear Regulator. This pin is the drive output for that external linear
regulator. Connect this pin to the base/gate of NPN/NMOS transistor as the pass element.
Supply Voltage. This pin along with VCCDRV pin and external pass element provides a
regulated 8V bias supply for the uP6209, the lower gate drivers, and the bootstrap circuit for
22 VCC upper drivers. This pin can receive a well-decoupled 4.5~13.2V supply voltage alone if the
VCCDRV pin is left open. Ensure that this pin is bypassed by a ceramic capacitor next to the
IC.
Lower Gate Driver Output for Channel 1. Connect this pin to the gate of lower MOSFET.
23 LGATE1 This pin is monitored by the adaptive shoot-through protection circuitry to determine when the
lower MOSFET has turned off.
Switch Node for Channel 1. Connect this pin to the source of the upper MOSFET and the
drain of the lower MOSFET. This pin is used as the sink for the UGATE driver. This pin is also
24 PHASE1 monitored by the adaptive shoot-through protection circuitry to determine when the upper
MOSFET has turned off. A Schottky diode between this pin and ground is recommended to
reduce negative transient voltage which is common in a power supply system.
Exposed Pad Power Ground. Tie this pin to the ground island/plane through the lowest impedance connection
PGND
available.
uPI Semiconductor Corp., http://www.upi-semi.com
Rev. F00, File Name: uP6209-DS-F0000
5


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for uP6209 electronic component.


Information Total 23 Pages
Link URL [ Copy URL to Clipboard ]
Download [ uP6209.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
uP6201AThe function is Compact Dual-Phase Synchronous-Rectified Buck Controller. uPI SemiconductoruPI Semiconductor
uP6201AThe function is Compact Dual-Phase Synchronous-Rectified Buck Controller. uPI SemiconductoruPI Semiconductor
uP6201AQThe function is Compact Dual-Phase Synchronous-Rectified Buck Controller. uPI SemiconductoruPI Semiconductor

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

uP62     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search