DataSheet39.com

What is PC3SH13YFZAX?

This electronic component, produced by the manufacturer "Sharp Microelectronics", performs the same function as "Phototriac Coupler".


PC3SH13YFZAX Datasheet PDF - Sharp Microelectronics

Part Number PC3SH13YFZAX
Description Phototriac Coupler
Manufacturers Sharp Microelectronics 
Logo Sharp Microelectronics Logo 


There is a preview and PC3SH13YFZAX download ( pdf file ) link at the bottom of this page.





Total 11 Pages



Preview 1 page

No Preview Available ! PC3SH13YFZAX datasheet, circuit

PC3SH13YFZAX
PC3SH13YFZAX
VDRM : 600V, Reinforced insulation type
Non-zero cross type
DIP 4 pin
Phototriac Coupler for triggering
Description
PC3SH13YFZAX reinforced insulation type
Phototriac Coupler include an infrared emitting diode
(IRED) optically coupled to an output Phototriac.
These devices feature full wave control and are ideal
isolated drivers for medium to high current Triacs.
DIP package provides 5.0kV isolation from input to
output with superior commutative noise immunity.
Features
1. High repetitive peak off-state voltage
(VDRM : 600V)
2. Non-zero crossing functionality
3. 4 pin DIP package
4. Reinforced insulation type
(MIN. 0.4mm internal separation)
5. Double transfer mold construction
(Ideal for Flow Soldering)
6. High isolation voltage between input and
output
(Viso(rms) : 5.0kV)
7. RoHS directive compliant
Agency approvals/Compliance
1. Recognized by UL1577 (Double protection
isolation), file No. E64380 (as model No. 3SH13)
2. Approved by CSA, file No. CA95323
(as model No. 3SH13)
3. Approved by BSI : file No.6690/7421
(BS EN60065/BS EN60950-1),
(as model No. 3SH13)
4. Approved by SEMKO, EN60065/EN60335-1/
EN60950-1 (as model No. 3SH13)
5. Approved by DEMKO, EN60065/EN60335-1/
EN60950-1 (as model No. 3SH13)
6. Approved by FIMKO, EN60065/EN60335-1/
EN60950-1 (as model No. 3SH13)
7. Approved by VDE
(DIN EN 60747-5-5), file No. 40008087
(as model No. 3SH13)
8. Package resin : UL flammability grade (94V-0)
Applications
1. Triggering for Triacs used to switch on and off
devices which require AC loads.
For example heaters, fans, motors, solenoids, and
valves.
2. Triggering for Triacs used for implementing phase
control in applications such as lighting control and
temperature control (HVAC).
3. AC line control in power supply applications.
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Sheet No.: OP14020EN
1

line_dark_gray
PC3SH13YFZAX equivalent
PC3SH13YFZAX
Supplement
Business dealing name
The business dealing name used for this product when ordered or delivered shall be PC3SH13YFZAX.
Package specification
Refer to the attached sheet, page 8 to 9.
Isolation voltage shall be measured in the following method.
(1) Short between pins 1 to 2 on the primary side and between pins 3 to 4 on the secondary side.
(2) The dielectric withstanding tester with zero-cross circuit shall be used.
(3) The wave form of applied voltage shall be a sine wave.
(It is recommended that the isolation voltage be measured in insulation oil.)
The relevant models are the models Approved by VDE according to DIN EN 60747-5-5.
Approved Model No. : 3SH13
VDE approved No. : 40008087 (According to the specification DIN EN 60747-5-5 )
Operating isolation voltage VIORM (Peak)
: 1140V
Transient voltage
: 9000V
Pollution
:2
Clearances distance (Between input and output)
: 8.0 mm (MIN.)
Creepage distance (Between input and output)
: 8.0 mm (MIN.)
Isolation thickness between input and output
: 0.4 mm (MIN.)
Tracking-proof
: CTI 175
Safety limit values
Current (Isi)
: 200mA (Diode side)
Power (Psi)
: 400mW (Phototransistor side)
Temperature (Tsi)
: 150°C
In order to keep safety electric isolation of photocoupler, please set the protective circuit to keep within safety
limit values when the actual application equipment troubled.
Indication of VDE approval " DVE " is printed on minimum unit package.
Isolation specification according to EN 60747-5-5.
Parameter
Symbol
Class of environmental test
-
Pollution
-
Maximum operating isolation voltage
VIORM(PEAK)
Partial discharge test voltage
(Between input and output)
Diagram 1
Diagram 2
Maximum over-voltage
Safety maximum ratings
1) Case temperature
2) Input current
Vm(PEAK)
Vini,a(PEAK)
Tsi
Isi
3) Electric power
(Output or Total power dissipation)
Psi
Isolation resistance
(Test voltage between input and output ;
DC 500V)
RISO
Conditions
-
-
-
Rating
40/100/21
2
1140
Unit
-
-
V
tm=10s, qc5pC
tst1=1s, qc5pC
tini=60 s
1830
2140
9000
V
V
V
IF=0, Pc=0
Pc=0
-
Tamb=Tsi
Tamb=100°C
Tamb= 25°C
150 °C
200 mA
400 mW
MIN. 109
MIN. 1011
MIN. 1012
Ω
Remark
Refer to
the Dia-
gram 1, 2
(Page 8/11)
Refer to
Fig.1, 2
(Page 8/11)
Precautions in performing isolation test
(1) Partial discharge test methods shall be the ones according to the specifications of EN 60747-5-5
(2) Please don't carry out isolation test (Viso) over Vini,a.
This product deteriorates isolation characteristics by partial discharge due to applying high voltage (ex. Vini,a).
And there is possibility that partial discharge occurs in operating isolation voltage. (VIORM).
Sheet No.: OP14020EN
5


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for PC3SH13YFZAX electronic component.


Information Total 11 Pages
Link URL [ Copy URL to Clipboard ]
Download [ PC3SH13YFZAX.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
PC3SH13YFZAFThe function is Phototriac Coupler. Sharp MicroelectronicsSharp Microelectronics
PC3SH13YFZAXThe function is Phototriac Coupler. Sharp MicroelectronicsSharp Microelectronics

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

PC3S     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search