|
|
PDF 74HC1G04GW Data sheet ( Hoja de datos )
| Número de pieza | 74HC1G04GW | |
| Descripción | Inverter | |
| Fabricantes | NXP Semiconductors | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de 74HC1G04GW (archivo pdf) en la parte inferior de esta página. Total 12 Páginas | ||
|
No Preview Available !
74HC1G04; 74HCT1G04
Inverter
Rev. 5 — 25 September 2013
Product data sheet
1. General description
The 74HC1G04; 74HCT1G04 is a single inverter. Inputs include clamp diodes that enable
the use of current limiting resistors to interface inputs to voltages in excess of VCC.
2. Features and benefits
Wide supply voltage range from 2.0 V to 6.0 V
Input levels:
For 74HC1G04: CMOS level
For 74HCT1G04: TTL level
Symmetrical output impedance
High noise immunity
Low power dissipation
Balanced propagation delays
ESD protection:
HBM JESD22-A114E exceeds 2000 V
MM JESD22-A115-A exceeds 200 V
Multiple package options
Specified from 40 C to +85 C and 40 C to +125 C
3. Ordering information
Table 1. Ordering information
Type number Package
Temperature range Name
74HC1G04GW 40 C to +125 C TSSOP5
74HCT1G04GW
74HC1G04GV 40 C to +125 C SC-74A
74HCT1G04GV
Description
plastic thin shrink small outline package; 5 leads;
body width 1.25 mm
plastic surface-mounted package; 5 leads
Version
SOT353-1
SOT753
1 page  
NXP Semiconductors
74HC1G04; 74HCT1G04
Inverter
Table 7. Static characteristics …continued
Voltages are referenced to GND (ground = 0 V). All typical values are measured at Tamb = 25 C.
Symbol Parameter
Conditions
40 C to +85 C
40 C to +125 C
Min Typ Max Min
Max
ICC
ICC
CI
supply current
additional supply
current
input capacitance
VI = VCC or GND; IO = 0 A;
VCC = 5.5 V
- - 10
per input; VCC = 4.5 V to 5.5 V;
VI = VCC 2.1 V; IO = 0 A
-
- 500
- 1.5 -
-
-
-
20
850
-
Unit
A
A
pF
11. Dynamic characteristics
Table 8. Dynamic characteristics
GND = 0 V; tr = tf 6.0 ns; All typical values are measured at Tamb = 25 C. For test circuit, see Figure 6
Symbol Parameter
Conditions
40 C to +85 C
40 C to +125 C Unit
Min Typ Max Min
Max
For type 74HC1G04
tpd propagation delay A to Y; see Figure 5
VCC = 2.0 V; CL = 50 pF
VCC = 4.5 V; CL = 50 pF
VCC = 5.0 V; CL = 15 pF
VCC = 6.0 V; CL = 50 pF
CPD power dissipation VI = GND to VCC
capacitance
[1]
-
-
-
-
[2] -
25 105
9 21
7-
8 18
16 -
-
-
-
-
-
135 ns
27 ns
- ns
23 ns
- pF
For type 74HCT1G04
tpd propagation delay A to Y; see Figure 5
VCC = 4.5 V; CL = 50 pF
VCC = 5.0 V; CL = 15 pF
CPD power dissipation VI = GND to VCC 1.5 V
capacitance
[1]
-
-
[2] -
10 24
8-
18 -
-
-
-
27 ns
- ns
- pF
[1] tpd is the same as tPLH and tPHL.
[2] CPD is used to determine the dynamic power dissipation PD (W).
PD = CPD VCC2 fi + (CL VCC2 fo) where:
fi = input frequency in MHz
fo = output frequency in MHz
CL = output load capacitance in pF
VCC = supply voltage in Volts
(CL VCC2 fo) = sum of outputs
74HC_HCT1G04
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 25 September 2013
© NXP B.V. 2013. All rights reserved.
5 of 12
5 Page 
NXP Semiconductors
74HC1G04; 74HCT1G04
Inverter
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
Non-automotive qualified products — Unless this data sheet expressly
states that this specific NXP Semiconductors product is automotive qualified,
the product is not suitable for automotive use. It is neither qualified nor tested
in accordance with automotive testing or application requirements. NXP
Semiconductors accepts no liability for inclusion and/or use of
non-automotive qualified products in automotive equipment or applications.
In the event that customer uses the product for design-in and use in
automotive applications to automotive specifications and standards, customer
(a) shall use the product without NXP Semiconductors’ warranty of the
product for such automotive applications, use and specifications, and (b)
whenever customer uses the product for automotive applications beyond
NXP Semiconductors’ specifications such use shall be solely at customer’s
own risk, and (c) customer fully indemnifies NXP Semiconductors for any
liability, damages or failed product claims resulting from customer design and
use of the product for automotive applications beyond NXP Semiconductors’
standard warranty and NXP Semiconductors’ product specifications.
Translations — A non-English (translated) version of a document is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.
16.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
17. Contact information
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: [email protected]
74HC_HCT1G04
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 25 September 2013
© NXP B.V. 2013. All rights reserved.
11 of 12
11 Page | ||
| Páginas | Total 12 Páginas | |
| PDF Descargar | [ Datasheet 74HC1G04GW.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| 74HC1G04GV | Inverter | NXP Semiconductors |
| 74HC1G04GW | Inverter | NXP Semiconductors |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |