74LVCH244A Datasheet PDF - Diodes
Part Number | 74LVCH244A | |
Description | OCTAL BUFFER/LINE DRIVER | |
Manufacturers | Diodes | |
Logo | ||
There is a preview and 74LVCH244A download ( pdf file ) link at the bottom of this page. Total 10 Pages |
Preview 1 page No Preview Available ! 74LVCH244A
OCTAL BUFFER/LINE DRIVER WITH BUS HOLD / 3 STATE OUTPUTS
Description
The 74LVCH244A provides two 4-bit line drivers with separate
output-enable (OE) inputs. When OE is low, the device passes data
from the A inputs to the Y outputs. When OE is high, the outputs are
in the high-impedance state.
The device is designed for operation with a power supply range of
1.65V to 3.6V.
Pin Assignments
The inputs are tolerant to 5.5V allowing this device to be used in a
mixed voltage environment. The device is fully specified for partial
power down applications using IOFF. The IOFF circuitry disables the
output preventing damaging current backflow when the device is
powered down.
Bus hold circuitry holds unused or un-driven inputs at a high or low
logic state. The use of external pull-up or pull down resistors is not
recommended.
Features
• Supply Voltage Range from 1.65V to 3.6V
• Sinks or Sources 24mA at VCC = 3V
• CMOS Low Power Consumption
• IOFF Supports Partial-Power Down Operation
• Inputs or Outputs Accept up to 5.5V
• Inputs Can be Driven by 3.3V or 5V Allowing for Mixed Voltage
Applications
• Schmitt Trigger Action at All Inputs
• Typical VOLP (Quiet Output Ground Bounce) less than 0.8V with
VCC = 3.3V and TA = +25°C
• Typical VOHV (Quiet Output Dynamic VOH) greater than 2.0V
with VCC = 3.3V and TA = +25°C
• ESD Protection Tested per JESD 22
• Exceeds 200-V Machine Model (A115)
• Exceeds 2000-V Human Body Model (A114)
• Exceeds 1000-V Charged Device Model (C101)
• Latch-Up Exceeds 250mA per JESD 78, Class I
• Totally Lead-Free & Fully RoHS compliant (Notes 1 & 2)
• Halogen and Antimony Free. Green” Device (Note 3)
Applications
• General Purpose Logic
• Bus Driving
• Power Down Signal Isolation
• Wide array of products such as:
PCs, Notebooks, Netbooks, Ultrabooks
Networking Computer Peripherals, Hard Drives, CD/DVD
ROM
TV, DVD, DVR, set top box
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
74LVCH244A
Document number: DS35889 Rev. 1 - 2
1 of 10
www.diodes.com
July 2014
© Diodes Incorporated
|
|
74LVCH244A
Switching Characteristics
Symbol
Parameter
Test Conditions
Propagation
tPD Delay AN to YN
Figure 1
Enable Time
tEN OE to YN
Figure 1
tDIS
tsk(0)
Disable Time
OE to YN
Output Skew
Time
Figure 1
VCC
1.8V ± 0.15V
2.5V ± 0.2V
2.7V
3.3V ± 0.3V
1.8V ± 0.15V
2.5V ± 0.2V
2.7V
3.3V ± 0.3V
1.8V ± 0.15V
2.5V ±
0.2V
2.7V
3.3V ± 0.3V
3.3V ± 0.3V
TA = +25°C
Min Typ Max
1 5.9 12
1 4.2 7.8
1 4.2 8.2
1.5 3.9 7.7
1 6.4 12.1
1 4.6 9.1
1 5 8.4
1.5 4.5 7.4
1 5.8 11.6
1 3.7 7.3
1 3.8 6.6
1.5 3.8 6.3
— — 1.0
TA = -40°C to
+85°C
Min Max
1 12.2
1 8.4
1 8.9
1.5 8.2
1 12.6
1 9.6
1 8.6
1.5 7.6
1 12.1
1 7.8
1 6.8
1.5 6.5
——
TA = -40°C to
+125°C
Min Max
1 12.4
1 10
19
1.5 8.3
1 14.1
1 11.7
1 10.3
1.5 9.4
1 13.6
1 9.9
1 8.6
1.5 8
— 1.5
Unit
ns
ns
ns
ns
Operating Characteristics
TA = +25°C
Symbol
Parameter
Test Conditions
Cpd
Power dissipation
F = 10 MHz
capacitance per gate Outputs Enabled
VCC
1.8V ± 0.15V
2.5V ±
0.2V
3.3V ± 0.3V
Typ
9.9
10.2
10.6
Unit
pF
Package Characteristics
Symbol
θJA
θJC
θJA
θJC
Parameter
Thermal Resistance
Junction-to-Ambient
Thermal Resistance
Junction-to-Case
Thermal Resistance
Junction-to-Ambient
Thermal Resistance
Junction-to-Case
Package
TSSOP-20
Test Conditions
Min
Typ
Max Unit
(Note 8)
— 74 — °C/W
TSSOP-20
(Note 8)
— 15 — °C/W
V-QFN4525-20
(Note 8)
— 67 — °C/W
V-QFN4525-20
(Note 8)
— 20 — °C/W
Note:
8. Test conditions for TSSOP-20 and V-QFN4525-20: Devices mounted on 4 layer FR-4 substrate PC board, 2oz copper, with minimum recommended
pad layout per JESD 51-7.
74LVCH244A
Document number: DS35889 Rev. 1 - 2
5 of 10
www.diodes.com
July 2014
© Diodes Incorporated
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for 74LVCH244A electronic component. |
Information | Total 10 Pages | |
Link URL | [ Copy URL to Clipboard ] | |
Download | [ 74LVCH244A.PDF Datasheet ] |
Share Link :
Electronic Components Distributor
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
Part Number | Description | MFRS |
74LVCH244A | The function is Octal buffer/line driver. NXP Semiconductors | |
74LVCH244A | The function is Octal buffer/line driver. Philips | |
74LVCH244A | The function is OCTAL BUFFER/LINE DRIVER. Diodes | |
Semiconductors commonly used in industry:
1N4148 |  
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
74LV
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA |