DataSheet.es    


PDF DTC114YKA Data sheet ( Hoja de datos )

Número de pieza DTC114YKA
Descripción NPN 100mA 50V Digital Transistors
Fabricantes ROHM Semiconductor 
Logotipo ROHM Semiconductor Logotipo



Hay una vista previa y un enlace de descarga de DTC114YKA (archivo pdf) en la parte inferior de esta página.


Total 11 Páginas

No Preview Available ! DTC114YKA Hoja de datos, Descripción, Manual

DTC114Y series
NPN 100mA 50V Digital Transistors (Bias Resistor Built-in Transistors)
Datasheet
Parameter
VCC
IC(MAX.)
R1
R2
Value
50V
100mA
10kW
47kW
lFeatures
1) Built-In Biasing Resistors
2) Built-in bias resistors enable the configuration of
an inverter circuit without connecting external
input resistors (see inner circuit).
3) The bias resistors consist of thin-film resistors
with complete isolation to allow negative biasing
of the input. They also have the advantage of
completely eliminating parasitic effects.
4) Only the on/off conditions need to be set for
operation, making the circuit design easy.
5) Complementary PNP Types :DTA114Y series
6) Complex transistors :EMH9 /UMH9N /IMH9A
/EMG5 /UMG5N NPN type
7) Lead Free/RoHS Compliant.
lOutline
VMT3
OUT
IN
GND
DTC114YM
(SC-105AA)
EMT3
OUT
IN
GND
DTC114YE
SOT-416 (SC-75A)
UMT3
OUT
IN
GND
DTC114YUA
SOT-323 (SC-70)
EMT3F
OUT
IN
GND
DTC114YEB
(SC-89)
UMT3F
OUT
IN
GND
DTC114YUB
(SC-85)
SMT3
OUT
IN
GND
DTC114YKA
SOT-346 (SC-59)
lInner circuit
lApplication
Switching circuit, Inverter circuit, Interface circuit,
Driver circuit
lPackaging specifications
Part No.
Package
DTC114YM
DTC114YEB
DTC114YE
DTC114YUB
DTC114YUA
DTC114YKA
VMT3
EMT3F
EMT3
UMT3F
UMT3
SMT3
Package
size
(mm)
1212
1616
1616
2021
2021
2928
Taping
code
T2L
TL
TL
TL
T106
T146
Reel size
(mm)
Tape width
(mm)
Basic
ordering
unit (pcs)
180 8 8,000
180 8 3,000
180 8 3,000
180 8 3,000
180 8 3,000
180 8 3,000
Marking
64
64
64
64
64
64
www.rohm.com
© 2012 ROHM Co., Ltd. All rights reserved.
1/10
2012.04 - Rev.A

1 page




DTC114YKA pdf
DTC114Y series
lDimensions (Unit : mm)
VMT3
D
b1
Ac
Data Sheet
eb
x SA
b3
S
b2 e
Patterm of terminal position areas
DIM
MILIMETERS
MIN MAX
A 0.45
0.55
A1 0.00
0.10
b 0.17
0.27
b1 0.27
0.37
c 0.08
0.18
D 1.10
1.30
E 0.70
0.90
e 0.40
HE 1.10
1.30
L 0.10
0.30
Lp 0.20
0.40
x-
0.10
INCHES
MIN MAX
0.018
0.022
0 0.004
0.007
0.011
0.011
0.015
0.003
0.007
0.043
0.051
0.028
0.035
0.02
0.043
0.051
0.004
-
0.008
-
- 0.004
DIM
MILIMETERS
MIN MAX
e1 0.80
b2 -
0.37
b3 -
0.47
l1 -
0.50
Dimension in mm/inches
INCHES
MIN MAX
0.03
- 0.015
- 0.019
- 0.02
www.rohm.com
© 2012 ROHM Co., Ltd. All rights reserved.
5/10
2012.04 - Rev.A

5 Page





DTC114YKA arduino
Notice
Notes
No copying or reproduction of this document, in part or in whole, is permitted without the
consent of ROHM Co.,Ltd.
The content specified herein is subject to change for improvement without notice.
The content specified herein is for the purpose of introducing ROHM's products (hereinafter
"Products"). If you wish to use any such Product, please be sure to refer to the specifications,
which can be obtained from ROHM upon request.
Examples of application circuits, circuit constants and any other information contained herein
illustrate the standard usage and operations of the Products. The peripheral conditions must
be taken into account when designing circuits for mass production.
Great care was taken in ensuring the accuracy of the information specified in this document.
However, should you incur any damage arising from any inaccuracy or misprint of such
information, ROHM shall bear no responsibility for such damage.
The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or
implicitly, any license to use or exercise intellectual property or other rights held by ROHM and
other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the
use of such technical information.
The Products specified in this document are intended to be used with general-use electronic
equipment or devices (such as audio visual equipment, office-automation equipment, commu-
nication devices, electronic appliances and amusement devices).
The Products specified in this document are not designed to be radiation tolerant.
While ROHM always makes efforts to enhance the quality and reliability of its Products, a
Product may fail or malfunction for a variety of reasons.
Please be sure to implement in your equipment using the Products safety measures to guard
against the possibility of physical injury, fire or any other damage caused in the event of the
failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM
shall bear no responsibility whatsoever for your use of any Product outside of the prescribed
scope or not in accordance with the instruction manual.
The Products are not designed or manufactured to be used with any equipment, device or
system which requires an extremely high level of reliability the failure or malfunction of which
may result in a direct threat to human life or create a risk of human injury (such as a medical
instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel-
controller or other safety device). ROHM shall bear no responsibility in any way for use of any
of the Products for the above special purposes. If a Product is intended to be used for any
such special purpose, please contact a ROHM sales representative before purchasing.
If you intend to export or ship overseas any Product or technology specified herein that may
be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to
obtain a license or permit under the Law.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com
© 2012 ROHM Co., Ltd. All rights reserved.
R1120A

11 Page







PáginasTotal 11 Páginas
PDF Descargar[ Datasheet DTC114YKA.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
DTC114YKANPN 100mA 50V Digital TransistorsROHM Semiconductor
ROHM Semiconductor
DTC114YKADigital transistorsJIANGSU CHANGJIANG ELECTRONICS
JIANGSU CHANGJIANG ELECTRONICS
DTC114YKANPN DIGITAL TRANSISTORJin Yu Semiconductor
Jin Yu Semiconductor
DTC114YKA3Digital transistors(built-in resistors)Leshan Radio Company
Leshan Radio Company

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar