DataSheet39.com

What is CAT5122?

This electronic component, produced by the manufacturer "ON Semiconductor", performs the same function as "16-Tap MiniPot Digitally Programmable Potentiometers".


CAT5122 Datasheet PDF - ON Semiconductor

Part Number CAT5122
Description 16-Tap MiniPot Digitally Programmable Potentiometers
Manufacturers ON Semiconductor 
Logo ON Semiconductor Logo 


There is a preview and CAT5122 download ( pdf file ) link at the bottom of this page.





Total 11 Pages



Preview 1 page

No Preview Available ! CAT5122 datasheet, circuit

CAT5120, CAT5121,
CAT5122
16‐tap Digital
Potentiometers (POTs)
with 2‐wire Interface
Description
CAT5120/5121/5122 linear-taper digital POTs perform the same
function as a mechanical potentiometer or a variable resistor. These
devices consist of a fixed resistor and a wiper contact with 16-tap
points that are digitally controlled through a 2-wire up/down serial
interface.
The CAT5120 is configured as a potentiometer. The CAT5121 and
CAT5122 are configured as variable resistors. See Pin Configurations
for part functionality.
Two resistance values are available: 10 kW and 50 kW. These are
available in space-saving 5-pin and 6-pin SC70 and SOT23
packages.
Features
0.3 mA Ultra-low Standby Current
Single-supply Operation: 2.7 V to 5.5 V
Glitchless Switching between Resistor Taps
Power-on Reset to Midscale
2-wire Up/Down Serial Interface
Resistance Values: 10 kW, 50 kW
Available in SC70 and SOT23 Packages
These Devices are Pb-Free, Halogen Free/BFR Free and are RoHS
Compliant
Applications
LCD Screen Adjustment
Volume Control
Mechanical Potentiometer Replacement
Gain Adjustment
Line Impedance Matching
http://onsemi.com
SC70
SD SUFFIX
CASE 419AD
SOT23
TB SUFFIX
CASE 527AJ
SC70
SD SUFFIX
CASE 419AC
SOT23
TB SUFFIX
CASE 527AH
PIN CONFIGURATIONS
SC70
SOT23
VDD 1
6H
GND 2
5W
CAT5120
U/D 3
4 CS
SC70
SOT23
VDD 1
6H
GND 2
5L
CAT5121
U/D 3
4 CS
SC70
SOT23
VDD 1
5H
GND 2
CAT5122
U/D 3
4 CS
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 7 of this data sheet.
Semiconductor Components Industries, LLC, 2013
July, 2013 Rev. 8
1
Publication Order Number:
CAT5120/D

line_dark_gray
CAT5122 equivalent
CAT5120, CAT5121, CAT5122
FUNCTIONAL DESCRIPTION
The CAT5120/5121/5122 consist of a fixed resistor and a
wiper contact with 16-tap points that are digitally controlled
through a 2-wire up/down serial interface. Two end-to-end
resistance values are available: 10 kW and 50 kW.
The CAT5120 is designed to operate as a potentiometer.
In this configuration, the low terminal of the resistor array
is connected to ground (pin 2).
The CAT5122 performs as a variable resistor. In this
device, the wiper terminal and high terminal of the resistor
array is connected at pin 5. The CAT5121 is a similar
variable resistor, except the low terminal is connected to
pin 5.
low, the part will go into increment mode if U/D input is
high, and into decrement mode when U/D input is low. Once
the mode is set, the device will remain in that mode until CS
goes high again. A low-to-high transition at the U/D pin will
increment or decrement the wiper position depending on the
current mode (Figures 7 and 8).
When the CS input transitions to high (serial interface
inactive), the value of the counter is stored and the wiper
position is maintained.
Note that when the wiper reaches the maximum (or
minimum) tap position, the wiper will not wrap around to the
minimum (or maximum) position.
Digital Interface Operation
The devices have two modes of operation when the serial
interface is active: increment and decrement mode. The
serial interface is only active when CS is low.
The CS and U/D inputs control the position of the wiper
along the resistor array. When CS transitions from high to
Power-on Reset
All parts in this family feature power-on reset (POR)
circuitry that sets the wiper position to midscale at
power-up. By default, the chip is in the increment mode.
CS
tCU
tIL
U/D
tCI tIH
tSETTLE
W
Note: “W” is not a digital signal. It represents wiper transitions.
Figure 7. Serial Interface Timing Diagram, Increment Mode
tIC
tSETTLE
CS
tCU
U/D
tIH
tIC
tIL
W tCI
tSETTLE
tSETTLE
Note: “W” is not a digital signal. It represents wiper transitions.
Figure 8. Serial Interface Timing Diagram, Decrement Mode
http://onsemi.com
5


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for CAT5122 electronic component.


Information Total 11 Pages
Link URL [ Copy URL to Clipboard ]
Download [ CAT5122.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
CAT512The function is 8-Bit Dual Digital POT with Independent Reference Inputs. Catalyst SemiconductorCatalyst Semiconductor
CAT5120The function is (CAT5120 - CAT5122) 16-Tap MiniPot TM Digitally Programmable Potentiometers. Catalyst SemiconductorCatalyst Semiconductor
CAT5120The function is 16-Tap MiniPot Digitally Programmable Potentiometers. ON SemiconductorON Semiconductor

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

CAT5     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search