ST20C2 Datasheet PDF - STMicroelectronics
Part Number | ST20C2 | |
Description | Instruction Set Reference Manual | |
Manufacturers | STMicroelectronics | |
Logo | ||
There is a preview and ST20C2 download ( pdf file ) link at the bottom of this page. Total 30 Pages |
Preview 1 page No Preview Available ! ST20C2/C4 Core
Instruction Set
Reference Manual
72-TRN-273-01 January 1996
®
|
|
1 Introduction
This manual provides a summary and reference to the ST20 instruction set for C2 and
C4 cores. The instructions are listed in alphabetical order, one to a page. Descriptions
are presented in a standard format with the instruction mnemonic and full name of the
instruction at the top of the page, followed by these categories of information:
• Code: the instruction code;
• Description: a brief summary of the purpose and behavior of the instruction;
• Definition: a more complete description of the instruction, using the notation
described below in section 1.7;
• Error signals: a list of errors and other signals which can occur;
• Comments: a list of other important features of the instruction;
• See also: for some instructions, a cross reference is provided to other instruc-
tions with a related function.
These categories are explained in more detail below, using the add instruction as an
example.
1.1 Instruction name
The header at the top of each page shows the instruction mnemonic and, on the right,
the full name of the instruction. For primary instructions the mnemonic is followed by
‘n’ to indicate the operand to the instruction; the same notation is used in the
description to show how the operand is used.
1.2 Code
For secondar y instructions the instruction ‘operation code’ is shown as the memory
code — the actual bytes, including any prefixes, which are stored in memory. The
value is given as a sequence of bytes in hexadecimal, decoded left to right. The codes
are stored in memory in ‘little-endian’ format — with the first byte at the lowest
address.
For primary instructions the code stored in memory is determined partly by the value
of the operand to the instruction. In this case the op-code is shown as ‘Function x’
where x is the function code in the last byte of the instruction. For example, adc (add
constant) is shown as ‘Function 8’.
Example
The entry for the add instruction is:
Code: F5
5/212
®
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for ST20C2 electronic component. |
Information | Total 30 Pages | |
Link URL | [ Copy URL to Clipboard ] | |
Download | [ ST20C2.PDF Datasheet ] |
Share Link :
Electronic Components Distributor
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
Part Number | Description | MFRS |
ST20C2 | The function is Instruction Set Reference Manual. STMicroelectronics | |
ST20C4 | The function is Instruction Set Reference Manual. STMicroelectronics | |
ST20Cx | The function is Instruction Set Reference Manual. ST Microelectronics | |
Semiconductors commonly used in industry:
1N4148 |  
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
ST20
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA |