DataSheet39.com

What is GS9015ACPJ?

This electronic component, produced by the manufacturer "ETC", performs the same function as "Serial Digital Reclocker".


GS9015ACPJ Datasheet PDF - ETC

Part Number GS9015ACPJ
Description Serial Digital Reclocker
Manufacturers ETC 
Logo ETC Logo 


There is a preview and GS9015ACPJ download ( pdf file ) link at the bottom of this page.





Total 13 Pages



Preview 1 page

No Preview Available ! GS9015ACPJ datasheet, circuit

GENLINXGS9015A
Serial Digital Reclocker
DATA SHEET
FEATURES
• reclocking of SMPTE 259M signals
• operational to 400 Mb/s
• adjustment free reclocker when used with the
GS9000B or GS9000S decoder and GS9010A
Automatic Tuning Sub-system
• 28 pin PLCC packaging
APPLICATIONS
• 4ƒSC, 4:2:2 and 360 Mb/s serial digital interfaces
ORDERING INFORMATION
PART NUMBER
GS9015ACPJ
GS9015ACTJ
PACKAGE
28 Pin PLCC
28 Pin PLCC Tape
TEMPERATURE
0O C to 70O C
0O C to 70O C
DEVICE DESCRIPTION
The GS9015A is a monolithic IC designed to receive SMPTE
259M serial digital video signals. This device performs the
function of data and clock recovery. It interfaces directly with
the GENLINXGS9000B or GS9000S Decoder.
While there are no plans to discontinue the GS9015A, Gennum
has developed a successor product with improved features
and performance called the GS9035. The GS9035 is
recommended for new designs.
The VCO centre frequencies are controlled by external resistors
which can be selected by applying a two bit binary code to the
Standards Select input pins. Alternatively, the GS9015A can
be used with the GS9010A to form an adjustment free reclocker
system.
The GS9015A is packaged in a 28 pin PLCC operating from
a single +5 or -5 volt supply.
SPECIAL NOTE: R and R are functional over a
VCO1
VCO2
reduced temperature range of TA=0°C to 50°C. RVCO0
and RVCO3 are functional over the full temperature range
of TA=0°C to 70°C. This limitation does not affect
operation with the GS9010A ATS.
DIGITAL 5,6
IN
DATA
LATCH
CARRIER 19
DETECT
CARRIER
DETECT
LOOP
FILTER 12
PLL
PHASE
COMPARATOR
÷2
CHARGE
PUMP
VCO
GS9015A
24
25
22
23
SERIAL DATA
SERIAL DATA
SERIAL CLOCK
SERIAL CLOCK
10
ƒ/2
STANDARD
SELECT
20 SS0
21 SS1
13 14 15 17
FUNCTIONAL BLOCK DIAGRAM
Revision Date: April 1998
Document No. 520 - 99 - 05
GENNUM CORPORATION P.O. Box 489, Stn. A, Burlington, Ontario, Canada L7R 3Y3 tel. +1 (905) 632-2996 fax. +1 (905) 632-5946
Web Site: www.gennum.com E-mail: [email protected]

line_dark_gray
GS9015ACPJ equivalent
GS9015A PIN DESCRIPTIONS cont.
PIN NO SYMBOL TYPE
DESCRIPTION
18
19
20,21
22,23
24,25
26
27
28
VCC2
CD
Output
Power Supply. Most positive power supply connection. (VCO, MUX, Standard Select).
Carrier Detect. Open collector output which goes HIGH when a signal is present at either the Serial
Data inputs or the Direct Digital inputs. This output is used in conjunction with the GS9000B or GS9000S
in the Automatic Standards Select Mode to disable the 2 bit standard select counter. This pin should
see a low AC impedance (e.g. 1nF to AC Gnd)
SS0, SS1 Inputs
Standard Select Inputs. TTL inputs to the 2:4 multiplexer used to select one of four VCO centre
frequency setting resistors (RVCO0 - RVCO3). When both SS0 and SS1 are LOW, RVCO0 is selected.
When SS0 is HIGH and SS1 is LOW, RVCO1 is selected. When SS0 is LOW and SS1 is HIGH, RVCO2
is selected and when both SS0 and SS1 are HIGH, RVCO3 is selected. These pins should see a
low AC impedance (e.g. 1nF to AC Gnd)
SCO/SCO Outputs
SDO/SDO Outputs
VCC3
VEE2
VEE1
Serial Clock Outputs (inverse and true). Pseudo-ECL differential outputs of the extracted serial clock.
These outputs require a 390 pull-down resistors to VEE.
Serial Data Outputs (inverse and true). Pseudo-ECL differential outputs of the regenerated serial data.
These outputs require a 390 pull-down resistors to VEE.
Power Supply. Most positive power supply connection. (ECL Outputs).
Power Supply. Most negative power supply connection. (Phase Detector, Carrier Detect)
Power Supply. Most negative power supply connection.
INPUT / OUTPUT CIRCUITS
VCC
+ 1.2V
-
2k 2k
1k 1k
DDI
Pin 5
DDI
Pin 6
380µA
+
- 1.6V
Fig. 3 Pins 1, 5 and 6
5
520 - 99 - 05


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for GS9015ACPJ electronic component.


Information Total 13 Pages
Link URL [ Copy URL to Clipboard ]
Download [ GS9015ACPJ.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
GS9015ACPJThe function is Serial Digital Reclocker. ETCETC

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

GS90     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search