|
|
PDF TD62064BP1G Data sheet ( Hoja de datos )
| Número de pieza | TD62064BP1G | |
| Descripción | 4ch High-Current Darlington Sink Driver | |
| Fabricantes | Toshiba | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de TD62064BP1G (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
|
No Preview Available !
TD62064BP1G/BFG
TOSHIBA Bipolar Digital Integrated Circuit Silicon Monolithic
TD62064BP1G,TD62064BFG
4ch High-Current Darlington Sink Driver
The TD62064BP1G and TD62064BFG are high-voltage,
high-current darlington drivers comprised of four NPN
darlington pairs. All units feature integral clamp diodes for
switching inductive loads.
Applications include relay, hammer, lamp and stepping motor
drivers.
Features
• Package type
BP1G: DIP16 pin
BFG: HSOP16 pin
• High output sustaining voltage: VCE (SUS) = 80 V (min)
• Output current (single output): IOUT = 1.5 A/ch (max)
• Output clamp diodes
• Input compatible with TTL and 5 V CMOS
• GND and SUB terminal = Heat sink
Pin Assignment (top view)
TD62064BP1G
O4 NC
I4
Heat sink
& GND
I3 NC O3
16 15 14 13 12 11 10
9
TD62064BP1G
TD62064BFG
Weight
DIP16-P-300-2.54A: 1.11 g (typ.)
HSOP16-P-300-1.00: 0.50 g (typ.)
1
COM
2
O1
3
I1
TD62064BFG
O4 NC I4 NC
16 15 14 13
45
Heat sink
& GND
Heat sink
& GND
678
I2 O2 COM
NC I3 NC O3
12 11 10 9
1234
COM O1 I1 NC
Heat sink
& GND
5678
NC I2 O2 COM
Note: The NC pins are not connected to the die. If wiring is required, it is recommended to connect the pins to the
Heat sink & GND line(s).
1 2009-10-01
1 page  
IOUT – VCE (sat)
1.6
TD62064
2 mA
Ta = 25°C
1.2
1 mA
500 μA
0.8
IIN = 300 μA
0.4
0
0 0.4 0.8 1.2 1.6 2.0
Output saturation voltage VCE (sat) (V)
TD62064BP1G/BFG
IOUT – VCE (sat)
1.5
TD62064
1.0
typ. 25°C max
0.5
0
0 0.5 1.0 1.5 2.0
Output saturation voltage VCE (sat) (V)
TD62064
12
8
IIN – VIN
max typ. min
4
0
1.0 2.0 3.0 4.0 5.0
Input voltage VIN (V)
2.0
TD62064
Ta = 25°C
1.6
1.2
0.8
IIN – VIN
IOUT = 100 mA
500 mA
1A
0.4
0
0 0.4 0.8 1.2 1.6 2.0 2.4
Input voltage VIN (V)
400 VCE = 2 V
IOUT – IIN
300
Ta = 75 °C 25 −30
200
100
0
50 100 150 200
Input current IIN (μA)
3.0
(1)
2.4
1.8
(2)
1.2 (3)
(4)
0.6
PD – Ta
(1) DIP-16 pin
On glass epoxy PCB
(50 × 50 × 1.6 mm Cu 50%)
(2) DIP-16 pin free air
(3) HSOP-16 pin
On glass epoxy PCB
(60 × 30 × 1.6 mm Cu 30%)
(4) HSOP-16 pin free air
0
0 40 80 120 160 200
Ambient temperature Ta (°C)
5 2009-10-01
5 Page 
TD62064BP1G/BFG
RESTRICTIONS ON PRODUCT USE
• Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively “Product”) without notice.
• This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.
• Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the
Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of
all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes
for Product and the precautions and conditions set forth in the “TOSHIBA Semiconductor Reliability Handbook” and (b) the
instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their
own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such
design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts,
diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating
parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR
APPLICATIONS.
• Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring
equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.
Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or
reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious
public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used
in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling
equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric
power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this
document.
• Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
• Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
• The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
• ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
• Do not use or otherwise make available Product or related software or technology for any military purposes, including without
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile
technology products (mass destruction weapons). Product and related software and technology may be controlled under the
Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product
or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.
• Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of
noncompliance with applicable laws and regulations.
11 2009-10-01
11 Page | ||
| Páginas | Total 11 Páginas | |
| PDF Descargar | [ Datasheet TD62064BP1G.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| TD62064BP1G | 4ch High-Current Darlington Sink Driver | Toshiba |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |