DataSheet39.com

What is SiT3809?

This electronic component, produced by the manufacturer "SiTime", performs the same function as "80 MHz to 220 MHz MEMS VCXO".


SiT3809 Datasheet PDF - SiTime

Part Number SiT3809
Description 80 MHz to 220 MHz MEMS VCXO
Manufacturers SiTime 
Logo SiTime Logo 


There is a preview and SiT3809 download ( pdf file ) link at the bottom of this page.





Total 14 Pages



Preview 1 page

No Preview Available ! SiT3809 datasheet, circuit

SiT3809
80 MHz to 220 MHz MEMS VCXO
Features
Any frequency between 80.000001 MHz and 220 MHz with 6 decimal
places of accuracy
100% pin-to-pin drop-in replacement to quartz-based VCXO
Frequency stability as tight as ±10 ppm
Widest pull range options from ±25 ppm to ±1600 ppm
Industrial or extended commercial temperature range
Superior pull range linearity of 1%, 10 times better than quartz
LVCMOS/LVTTL compatible output
Four industry-standard packages: 2.5 mm x 2.0 mm (4-pin),
3.2 mm x 2.5mm (4-pin), 5.0 mm x 3.2 mm (6-pin), 7.0 mm x 5.0 mm
(6-pin)
Instant samples with Time Machine II and field programmable
oscillators
RoHS and REACH compliant, Pb-free, Halogen-free and
Antimony-free
TThhee SSmmaarrtt TTiimmiinngg CChhooiiccee
Applications
Telecom clock synchronization, instrumentation
Low bandwidth analog PLL, jitter cleaner, clock recovery, audio
Video, 3G/HD-SDI, FPGA, broadband and networking
Electrical Specifications
Table 1. Electrical Characteristics[1, 2, 3]
Parameter
Output Frequency Range
Frequency Stability
Aging
Operating Temperature Range
Supply Voltage
Current Consumption
Standby Current
Pull Range[5, 6]
Upper Control Voltage
Lower Control Voltage
Control Voltage Input Impedance
Control Voltage Input Capacitance
Linearity
Frequency Change Polarity
Control Voltage Bandwidth (-3dB)
Symbol
f
F_stab
F_aging
T_use
Vdd
Idd
I_std
PR
VC_U
VC_L
Z_in
C_in
Lin
V_BW
Min.
Typ.
Max.
Unit
Condition
Frequency Range
80.000001
220 MHz
Frequency Stability and Aging
-10 – +10 ppm Inclusive of Initial tolerance[4] at 25°C, and variation over
-25 – +25 ppm temperature, rated supply voltage and load.
-50 – +50 ppm
-5 – +5 ppm 10 years, 25°C
-20 – +70 °C Extended Commercial
-40 – +85 °C Industrial
Supply Voltage and Current Consumption
1.71
1.8
1.89
V Additional supply voltages between 2.5V and 3.3V can be
2.25
2.5
2.75
V supported. Contact SiTime for additional information.
2.52
2.8
3.08
V
2.97
3.3
3.63
V
– 34 36 mA No load condition, f = 100 MHz, Vdd = 2.5V, 2.8V or 3.3V
– 30 33 mA No load condition, f = 100 MHz, Vdd = 1.8V
– – 70 A Vdd = 2.5V, 2.8V, 3.3V, ST = GND, output is Weakly Pulled Down
– – 10 A Vdd = 1.8V, ST = GND, output is Weakly Pulled Down
VCXO Characteristics
±25, ±50, ±100, ±150, ±200,
±400, ±800, ±1600
ppm See the Absolute Pull Range and APR table on page 8
1.7 –
– V Vdd = 1.8V, Voltage at which maximum deviation is guaranteed.
2.4 –
– V Vdd = 2.5V, Voltage at which maximum deviation is guaranteed.
2.7 –
– V Vdd = 2.8V, Voltage at which maximum deviation is guaranteed.
3.2 –
– V Vdd = 3.3V, Voltage at which maximum deviation is guaranteed.
– – 0.1 V Voltage at which minimum deviation is guaranteed.
100 –
– k
– 5 – pF
– 0.1 1 %
Positive slope
– 8 – kHz Contact SiTime for 16 kHz and other high bandwidth options
SiTime Corporation
Rev. 1.0
990 Almanor Avenue, Sunnyvale, CA 94085
(408) 328-4400
www.sitime.com
Revised March 18, 2014

line_dark_gray
SiT3809 equivalent
SiT3809
80 MHz to 220 MHz MEMS VCXO
Timing Diagram
TThhee SSmmaarrtt TTiimmiinngg CChhooiiccee
80% Vdd, 2.5/2.8/3.3V devices Vdd
80% Vdd, 1.8V devices
Pin 4 Voltage
T_start
No Glitch
during start up
50% Vdd
ST Voltage
Vdd
T_resume
CLK Output
T_start: Time to start from power-off
Figure 7. Startup Timing (OE/ST Mode)
50% Vdd
OE Voltage
u
Vdd
T_oe
CLK Output
CLK Output
T_resume: Time to resume from ST
Figure 8. Standby Resume Timing (ST Mode Only)
Vdd
OE Voltage
CLK Output
50% Vdd
T_oe
HZ
T_oe: Time to re-enable the clock output
T_oe: Time to put the output in High Z mode
Figure 9. OE Enable Timing (OE Mode Only)
Figure 10. OE Disable Timing (OE Mode Only)
Notes:
13. SiT3809 supports “no runt” pulses and “no glitch” output during startup or resume.
14. SiT3809 supports gated output which is accurate within rated frequency stability from the first cycle.
Rev. 1.0
Page 5 of 9
www.sitime.com


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for SiT3809 electronic component.


Information Total 14 Pages
Link URL [ Copy URL to Clipboard ]
Download [ SiT3809.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
SiT3809The function is 80 MHz to 220 MHz MEMS VCXO. SiTimeSiTime

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

SiT3     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search