|
|
Datasheet SS72013 Equivalent ( PDF ) |
| N.º | Número de pieza | Descripción | Fabricantes | Category |
| 1 | SS72013 | Low-Noise Cables Low-Noise Cables
Thermax Low-Noise cables minimize triboelectric noise generated by cable movement, as well as providing superior shielding to protect signals from external interference. These cables are ideal for use with piezoelectric accelerometers or other sensitive transducers, or other applica |  Thermax | data |
SS7 Datasheet ( Hoja de datos ) - resultados coincidentes |
| N.º | Número de pieza | Descripción | Fabricantes | Catagory |
| 1 | SS72012 | Low-Noise Cables Low-Noise Cables
Thermax Low-Noise cables minimize triboelectric noise generated by cable movement, as well as providing superior shielding to protect signals from external interference. These cables are ideal for use with piezoelectric accelerometers or other sensitive transducers, or other applica Thermax data | | |
| 2 | SS72013 | Low-Noise Cables Low-Noise Cables
Thermax Low-Noise cables minimize triboelectric noise generated by cable movement, as well as providing superior shielding to protect signals from external interference. These cables are ideal for use with piezoelectric accelerometers or other sensitive transducers, or other applica Thermax data | | |
| 3 | SS72014 | Low-Noise Cables Low-Noise Cables
Thermax Low-Noise cables minimize triboelectric noise generated by cable movement, as well as providing superior shielding to protect signals from external interference. These cables are ideal for use with piezoelectric accelerometers or other sensitive transducers, or other applica Thermax data | | |
| 4 | SS72016 | Low-Noise Cables Low-Noise Cables
Thermax Low-Noise cables minimize triboelectric noise generated by cable movement, as well as providing superior shielding to protect signals from external interference. These cables are ideal for use with piezoelectric accelerometers or other sensitive transducers, or other applica Thermax data | | |
| 5 | SS732 | Hall Latch - High Sensitivity SS732/SS632
Hall Latch - High Sensitivity
Features and Benefits
– – – – Wide operating voltage range from 2.5V to 24V High magnetic sensitivity – Multi-purpose CMOS technology Chopper-stabilized amplifier stage Superior temperature stability Extremely low switchpoint drift Inse  SEC latch | | |
| 6 | SS7500 | Multi-mode SCSI Terminator SS7500 Multi-mode SCSI Terminator
FEATURES
!" Fully compliant with Ultra160/m SCSI, Ultra2 and Ultra3 standards. !" Auto-selection Multi-Mode SE or LVD termination for 9 signal line pairs. !" 5 V operation !" Built in thermal shutdown circuitry !" Supports Master/Slave input. !" SCSI bus hot-plug c  Silicon Standard data | | |
| 7 | SS7505 | 75V N-Channel MOSFET Main Product Characteristics
VDSS
75V
RDS(on) 3.3mohm(typ.)
ID 170A
TO-220
Features and Benefits
Advanced trench MOSFET process technology Special designed for PWM, load switching and
general purpose applications Ultra low on-resistance with low gate charge Fast switching and  GOOD-ARK mosfet | | |
| 8 | SS7519 | Multi-mode SCSI Terminator SS7519 Multi-mode SCSI Terminator
FEATURES
!" Meets SCSI-1, SCSI-2, Ultra3 and Ultra320 Standards. !" Auto-selectable Multimode single-ended or Low Voltage Differential termination. !" Current limit and thermal shutdown protection. !" Ground driver integrated for single-ended operation !" Compatible Silicon Standard data | | |
| 9 | SS7529 | Synchronous Buck PWM and Linear Power Controller SS7529
Synchronous Buck PWM and Linear Power Controller
FEATURE
Controller operates from 5V and 12V Drives two N-channel MOSFETs for switching buck converter Drives an N-channel MOSFET on the linear output Fixed 600kHz constant switching frequency Full range 0~100% duty cycle Internal soft start Fa Silicon Standard controller | |
| Esta página es del resultado de búsqueda del SS72013. Si pulsa el resultado de búsqueda de SS72013 se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin. |
nuevas actualizaciones
| Número de pieza | Descripción | Fabricantes | |
| SPS122 | Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use. |
 Sanken |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Sitemap |