|
|
PDF CNY65AGRST Data sheet ( Hoja de datos )
| Número de pieza | CNY65AGRST | |
| Descripción | Optocoupler | |
| Fabricantes | Vishay | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de CNY65AGRST (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
|
No Preview Available !
CNY64AYST, CNY64ABST, CNY64AGRST, CNY65AYST, CNY65ABST, CNY65AGRST
www.vishay.com
Vishay Semiconductors
Optocoupler, Phototransistor Output, Very High Isolation Voltage
CNY64ST
Top View
AC
CNY65ST
CE
DVE
17187-6
17187-5
DESCRIPTION
The CNY6XST, the high isolation voltage SMD version
optocouplers consist of a phototransistor optically coupled
to a gallium arsenide infrared-emitting diode in a 4 pin
plastic package.
The single components are mounted opposite one another,
providing a distance between input and output for highest
safety requirements of > 3 mm.
VDE STANDARDS
These couplers perform safety functions according to the
following equipment standards:
• DIN EN 60747-5-2 (VDE 0884)
Optocoupler for electrical safety requirements
• IEC 60065
Safety for mains-operated electronic and related
household apparatus
• VDE 0160
Electronic equipment for electrical power installation
FEATURES
• Rated recurring peak voltage (repetitive)
VIORM = 1450 Vpeak
• Thickness through insulation ≥ 3 mm
• Creepage current resistance according to
VDE 0303/IEC 60112 comparative tracking
index: CTI ≥ 475
• Moisture sensitivity level MSL4
- Follow defined storage and soldering
requirements
• Compliant to RoHS Directive 2002/95/EC and
accordance to WEEE 2002/96/EC
Note
** Please see document “Vishay Material Category Policy”:
www.vishay.com/doc?99902
in
APPLICATIONS
• Solar and wind power diagnostic, monitoring, and
communication equipment
• Welding equipment
• High voltage motors
• Switch-mode power supplies
• Line receiver
• Computer peripheral interface
• Microprocessor system interface
• Circuits for safe protective separation against electrical
shock according to safety class II (reinforced isolation):
- for appl. class I to IV at mains voltage ≤ 300 V
- for appl. class I to IV at mains voltage ≤ 600 V
- for appl. class I to III at mains voltage ≤ 1000 V
according to DIN EN 60747-5-2 (VDE 0884)
AGENCY APPROVALS
• DIN EN 60747-5-2 (VDE 0884) (pending)
• UL1577, file no. E76222 system code H, J, and K
(pending)
• VDE related features:
- rated impulse voltage (transient overvoltage),
VIOTM = 12 kVpeak
- isolation test voltage (partial discharge test voltage),
Vpd = 2.8 kVpeak
ORDERING INFORMATION
CNY 6 # XXXS T
CNY64ST
CNY65ST
PART NUMBER
PACKAGE
OPTION
AGENCY CERTIFIED/PACKAGE
UL, VDE
SMD-4 HV, 400 mil high isolation distance
SMD-4 HV, 600 mil high isolation distance
50 to 300
CNY64ST
CNY65ST
CTR BIN
10.16 mm
CTR (%)
5 mA
50 to 150
80 to 240
CNY64AYST
CNY64ABST
CNY65AYST
CNY65ABST
15.24 mm
100 to 300
CNY64AGRST
CNY65AGRST
Rev. 1.0, 20-Sep-11
1 Document Number: 82387
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
http://www.Datasheet4U.com
1 page  
CNY64AYST, CNY64ABST, CNY64AGRST, CNY65AYST, CNY65ABST, CNY65AGRST
www.vishay.com
Vishay Semiconductors
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
280
240
Coupled device
200
160
Phototransistor
120
IR-diode
80
40
0
0 25 50 75 100
22293 Tamb - Ambient Temperature (°C)
Fig. 6 - Total Power Dissipation vs. Ambient Temperature
30
IF = 25 mA
25
20
15
IF = 10 mA
10
IF = 5 mA
5
IF = 1 mA
IF = 2 mA
0
0 0.1 0.2 0.3 0.4 0.5
22509 VCE - Collector Emitter Voltage (sat) (V)
Fig. 9 - Collector Current vs. Collector Emitter Voltage
100
10 Tamb = - 55 °C
Tamb = - 40 °C
Tamb = 0 °C
Tamb = 25 °C
1 Tamb = 50 °C
Tamb = 75 °C
Tamb = 85 °C
0.1
0.4
0.6 0.8 1.0 1.2 1.4 1.6
VF - Forward Voltage (V)
1.8
Fig. 7 - Forward Current vs. Forward Voltage
1000
100
IF = 0
10
1 VCE = 12 V
VCE = 24 V
0.1
0.01
VCE = 40 V
- 55 - 35 - 15 5 25 45 65 85
Tamb - Ambient Temperature (°C)
Fig. 10 - Leakage Current vs. Ambient Temperature
45
40 IF = 30 mA
35
30
25 IF = 20 mA
20 IF = 15 mA
15
10 IF = 10 mA
5 IF = 5 mA
0
0 2 4 6 8 10 12
22508 VCE - Collector Emitter Voltage (NS) (V)
Fig. 8 - Collector Current vs. Collector Emitter Voltage (NS)
1.2
VCE = 0.4 V
1.0
0.8
IF = 10 mA
IF = 5 mA
0.6
IF = 1 mA
0.4
0.2
0
- 55 - 40 - 20 0 20 40 60 85
Tamb - Ambient Temperature (°C)
Fig. 11 - Normalized CTR (sat) vs. Ambient Temperature
Rev. 1.0, 20-Sep-11
5 Document Number: 82387
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
http://www.Datasheet4U.com
5 Page 
www.vishay.com
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1 Document Number: 91000
http://www.Datasheet4U.com
11 Page | ||
| Páginas | Total 11 Páginas | |
| PDF Descargar | [ Datasheet CNY65AGRST.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| CNY65AGRST | Optocoupler | Vishay |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |