MX29GL128F Datasheet PDF - MACRONIX
Part Number | MX29GL128F | |
Description | SINGLE VOLTAGE 3V ONLY FLASH MEMORY | |
Manufacturers | MACRONIX | |
Logo | ||
There is a preview and MX29GL128F download ( pdf file ) link at the bottom of this page. Total 30 Pages |
Preview 1 page No Preview Available ! MX29GL128F
MX29GL128F
DATASHEET
P/N:PM1683
REV. 1.4, OCT. 30, 2013
1
http://www.Datasheet4U.com
|
|
MX29GL128F
SINGLE VOLTAGE 3V ONLY FLASH MEMORY
FEATURES
GENERAL FEATURES
• Power Supply Operation
- 2.7 to 3.6 volt for read, erase, and program operations
- MX29GL128F H/L: VI/O=VCC=2.7V~3.6V, VI/O voltage must tight with VCC
- MX29GL128F U/D: VI/O=1.65V~3.6V for Input/Output
• Byte/Word mode switchable
- 16,777,216 x 8 / 8,388,608 x 16
• 64KW/128KB uniform sector architecture
- 128 equal sectors
• 16-byte/8-word page read buffer
• 64-byte/32-word write buffer
• Extra 128-word sector for security
- Features factory locked and identifiable, and customer lockable
• Advanced sector protection function (Solid and Password Protect)
• Latch-up protected to 100mA from -1V to 1.5xVcc
• Low Vcc write inhibit : Vcc ≤ VLKO
• Compatible with JEDEC standard
- Pinout and software compatible to single power supply Flash
• Deep power down mode
PERFORMANCE
• High Performance
- Fast access time:
- MX29GL128F H/L: 70/90ns (VCC=2.7~3.6V)
- MX29GL128F U/D: 90/110ns (VCC=2.7~3.6V, V I/O=1.65V to Vcc)
- Page access time:
- MX29GL128F H/L: 25ns
- MX29GL128F U/D: 30ns
- Fast program time: 10us/word
- Fast erase time: 0.5s/sector
• Low Power Consumption
- Low active read current: 10mA (typical) at 5MHz
- Low standby current: 20uA (typical)
• Minimum 100,000 erase/program cycle
• 20 years data retention
SOFTWARE FEATURES
• Program/Erase Suspend & Program/Erase Resume
- Suspends sector erase operation to read data from or program data to another sector which is not being
erased
- Suspends sector program operation to read data from another sector which is not being program
• Status Reply
- Data# Polling & Toggle bits provide detection of program and erase operation completion
• Support Common Flash Interface (CFI)
HARDWARE FEATURES
• Ready/Busy# (RY/BY#) Output
- Provides a hardware method of detecting program and erase operation completion
• Hardware Reset (RESET#) Input
- Provides a hardware method to reset the internal state machine to read mode
• WP#/ACC input pin
- Hardware write protect pin/Provides accelerated program capability
PACKAGE
• 56-Pin TSOP
• 56-Ball FBGA (7mm x 9mm)
• 64-Ball LFBGA (11mm x 13mm)
• All devices are RoHS Compliant and Halogen-free
P/N:PM1683
REV. 1.4, OCT. 30, 2013
5
http://www.Datasheet4U.com
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for MX29GL128F electronic component. |
Information | Total 30 Pages | |
Link URL | [ Copy URL to Clipboard ] | |
Download | [ MX29GL128F.PDF Datasheet ] |
Share Link :
Electronic Components Distributor
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
Part Number | Description | MFRS |
MX29GL128E | The function is 64m-bit Single Voltage 3V ONLY Uniform Sector Flash Memory. Macronix America | |
MX29GL128E | The function is FLASH MEMORY. Macronix International | |
MX29GL128F | The function is SINGLE VOLTAGE 3V ONLY FLASH MEMORY. MACRONIX | |
Semiconductors commonly used in industry:
1N4148 |  
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
MX29
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA |