MX25U1001E Datasheet PDF - MACRONIX
Part Number | MX25U1001E | |
Description | FLASH MEMORY | |
Manufacturers | MACRONIX | |
Logo | ||
There is a preview and MX25U1001E download ( pdf file ) link at the bottom of this page. Total 42 Pages |
Preview 1 page No Preview Available ! ADVANCED INFORMATION
MX25U5121E
MX25U1001E
MX25U5121E, MX25U1001E
DATASHEET
P/N: PM1980
REV. 0.00, OCT. 11, 2013
1
http://www.Datasheet4U.com
|
|
ADVANCED INFORMATION
MX25U5121E
MX25U1001E
program pulse widths (Any page to be programed should have page in the erased state first)
• Status Register Feature
• Electronic Identification
- JEDEC 1-byte manufacturer ID and 2-bytes device ID
HARDWARE FEATURES
• SCLK Input
- Serial clock input
• SI/SIO0
- Serial Data Input or Serial Data Input/Output for 2 x I/O read mode and 4 x I/O read mode
• SO/SIO1
- Serial Data Output or Serial Data Input/Output for 2 x I/O read mode and 4 x I/O read mode
• WP#/SIO2
- Hardware write protection or Serial Data Input/Output for 4 x I/O read mode
• HOLD#/SIO3
- Pause the chip without diselecting the chip or Serial Data Input/Output for 4 x I/O read mode
• PACKAGE
- 8-pin SOP (150mil)
- 8-pin TSSOP (173mil)
- 8-USON (2x3mm)
- All devices are RoHS Compliant and Halogen-free
2. GENERAL DESCRIPTION
The device feature a serial peripheral interface and software protocol allowing operation on a simple 3-wire bus.
The three bus signals are a clock input (SCLK), a serial data input (SI), and a serial data output (SO). Serial access
to the device is enabled by CS# input.
The device provides sequential read operation on the whole chip.
After program/erase command is issued, auto program/erase algorithms which program/erase and verify the speci-
fied page or sector locations will be executed. Program command is executed on page (32 bytes) basis, and erase
command is executes on sector, or block, or whole chip.
To provide user with ease of interface, a status register is included to indicate the status of the chip. The status read
command can be issued to detect completion status of a program or erase operation via WIP bit.
When the device is not in operation and CS# is high, it is put in Standby Mode and draws less than 35uA (typical:25uA)
DC current.
The device utilizes Macronix proprietary memory cell, which reliably stores memory contents even after typical
100,000 program and erase cycles.
P/N: PM1980
REV. 0.00, OCT. 11, 2013
5
http://www.Datasheet4U.com
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for MX25U1001E electronic component. |
Information | Total 42 Pages | |
Link URL | [ Copy URL to Clipboard ] | |
Download | [ MX25U1001E.PDF Datasheet ] |
Share Link :
Electronic Components Distributor
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
Part Number | Description | MFRS |
MX25U1001E | The function is FLASH MEMORY. MACRONIX | |
Semiconductors commonly used in industry:
1N4148 |  
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
MX25
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA |