DataSheet39.com

What is MT1102ET?

This electronic component, produced by the manufacturer "MagnTek", performs the same function as "Hall-Effect Magnetic Position Sensors".


MT1102ET Datasheet PDF - MagnTek

Part Number MT1102ET
Description Hall-Effect Magnetic Position Sensors
Manufacturers MagnTek 
Logo MagnTek Logo 


There is a preview and MT1102ET download ( pdf file ) link at the bottom of this page.





Total 10 Pages



Preview 1 page

No Preview Available ! MT1102ET datasheet, circuit

MT1102 Series
CMOS, Uni-polar, Hall-Effect Magnetic Position Sensors
Features and Benefits
CMOS Technology
Magnetic Type: Uni-polar
Wide Operating Voltage Range:
Supply Voltage 3.5~24V
℃ ℃Specified Operating Temperature Range:
From –40 ~125
High Magnetic Sensitivity
Bop=65Gauss, Brp=45Gauss (typical)
Lower Power Consumption
Supply Current <3mA (typical)
Lead Free Package
Flat TO-92, SOT-23, SOT-89B
High ESD Rating
Open Drain Output
RoHS Compliant
2011/65/EU
Applications
Automotive, Home appliances, Industrial
Speed Detection
Position Detection
Magnetic Encoder
Solid-State Switch
Proximity Switch
Water Flow Sensor
Family Members
Part number
MT1102A
MT1102A-T
MT1102AT
MT1102BT
MT1102ET
Description
Flat TO-92 package, bulk packaging (1000pcs/bag)
Flat TO-92 package, Radial lead, bulk packaging (1000pcs/bag)
SOT-23 package, tape and reel packaging (3000pcs/bag)
SOT-89B package, tape and reel packaging (1000pcs/bag)
SOT-23(thin outline) package, tape and reel packaging (3000pcs/bag)
General Description
The MT1102 family, produced with CMOS technology, The Hall IC internally includes an on-chip Hall
voltage generator, a voltage regulator for operation with supply voltages of 3.5 to 24V, temperature
compensation circuitry, small-signal amplifier, Hall sensor with dynamic offset cancellation system,
Schmitt trigger and an open-drain output.
They are designed to respond to a single pole: North (AT) or South (A, BT and ET). While the magnetic
flux density(B) is larger than operate point (Bop), the output will be turned on (Low), while the magnetic
flux density(B) is lower than release point (Brp), then turn off (High).
The MT1102 family provides a variety of packages to customers: SOT-23/SOT-89B for surface mount and
TO-92 flat for through-hole mount. All packages are RoHS compliant.
www.magntek.de
Rev.3 09/2012
01/10
Free Datasheet http://www.datasheet4u.com/

line_dark_gray
MT1102ET equivalent
MT1102 Series
CMOS, Uni-polar, Hall-Effect Magnetic Position Sensors
Typical Application Circuit
Rv
VS
100ohm
100nf
VDD
MT1102OUT
GND
RL
10K
20pf
Typical Output Waveform (The TO-92 package as an example )
B
Magnetic Field
BOP
BRP
V
High
Digital Output
Low
T
T
www.magntek.de
Rev.3 09/2012
05/10
Free Datasheet http://www.datasheet4u.com/


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for MT1102ET electronic component.


Information Total 10 Pages
Link URL [ Copy URL to Clipboard ]
Download [ MT1102ET.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
MT1102ETThe function is Hall-Effect Magnetic Position Sensors. MagnTekMagnTek

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

MT11     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search