|
|
PDF UPG2214TK Data sheet ( Hoja de datos )
| Número de pieza | UPG2214TK | |
| Descripción | L. S-BAND SPDT SWITCH | |
| Fabricantes | CEL | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de UPG2214TK (archivo pdf) en la parte inferior de esta página. Total 12 Páginas | ||
|
No Preview Available !
GaAs INTEGRATED CIRCUIT
PG2214TK
L, S-BAND SPDT SWITCH
DESCRIPTION
The PG2214TK is a GaAs MMIC for L, S-band SPDT (Single Pole Double Throw) switch which was developed
for mobile phone and another L, S-band application.
This device can operate 2 control switching by control voltage 1.8 to 5.3 V. This device can operate frequency
from 0.05 to 3.0 GHz, having the low insertion loss and high isolation.
This device is housed in a 6-pin lead-less minimold (1511) package. And this package is able to high-density
surface mounting.
FEATURES
• Switch control voltage
: Vcont (H) = 1.8 to 5.3 V (3.0 V TYP.)
• Low insertion loss
: Vcont (L) = 0.2 to +0.2 V (0 V TYP.)
: Lins1 = 0.25 dB TYP. @ f = 0.05 to 0.5 GHz, Vcont (H) = 3.0 V, Vcont (L) = 0 V
: Lins2 = 0.25 dB TYP. @ f = 0.5 to 1.0 GHz, Vcont (H) = 3.0 V, Vcont (L) = 0 V
: Lins3 = 0.30 dB TYP. @ f = 1.0 to 2.0 GHz, Vcont (H) = 3.0 V, Vcont (L) = 0 V
: Lins4 = 0.35 dB TYP. @ f = 2.0 to 2.5 GHz, Vcont (H) = 3.0 V, Vcont (L) = 0 V
• High isolation
: Lins5 = 0.35 dB TYP. @ f = 2.5 to 3.0 GHz, Vcont (H) = 3.0 V, Vcont (L) = 0 V
: ISL1 = 32 dB TYP. @ f = 0.05 to 0.5 GHz, Vcont (H) = 3.0 V, Vcont (L) = 0 V
: ISL2 = 28 dB TYP. @ f = 0.5 to 1.0 GHz, Vcont (H) = 3.0 V, Vcont (L) = 0 V
: ISL3 = 27 dB TYP. @ f = 1.0 to 2.0 GHz, Vcont (H) = 3.0 V, Vcont (L) = 0 V
: ISL4 = 26 dB TYP. @ f = 2.0 to 2.5 GHz, Vcont (H) = 3.0 V, Vcont (L) = 0 V
• Handling power
: ISL5 = 24 dB TYP. @ f = 2.5 to 3.0 GHz, Vcont (H) = 3.0 V, Vcont (L) = 0 V
: Pin (1 dB) = +27.0 dBm TYP. @ f = 0.5 to 3.0 GHz, Vcont (H) = 3.0 V, Vcont (L) = 0 V
: Pin (1 dB) = +20.0 dBm TYP. @ f = 0.5 to 3.0 GHz, Vcont (H) = 1.8 V, Vcont (L) = 0 V
• High-density surface mounting : 6-pin lead-less minimold package (1.5 1.1 0.55 mm)
APPLICATIONS
• L, S-band digital cellular or cordless telephone
• W-LAN, WLL and BluetoothTM etc.
ORDERING INFORMATION
Part Number
PG2214TK-E2
Package
6-pin lead-less minimold (1511)
Marking
G4K
Supplying Form
Embossed tape 8 mm wide
Pin 1, 6 face the perforation side of the tape
Qty 5 kpcs/reel
Remark To order evaluation samples, contact your nearby sales office.
Part number for sample order: PG2214TK-A
Caution: Observe precautions when handling because these devices are sensitive to electrostatic discharge
Document No. PG10475EJ04V0DS (4th edition)
Date Published October 2004 CP(K)
The mark shows major revised points.
Free Datasheet http://www.datasheet4u.com/
1 page  
EVALUATION CIRCUIT
PG2214TK
Note C0 : 0.05 to 0.5 GHz 1 000 pF
: 0.5 to 3.0 GHz 100 pF
The application circuits and their parameters are for reference only and are not intended for use in actual design-ins.
Data Sheet PG10475EJ04V0DS
5
Free Datasheet http://www.datasheet4u.com/
5 Page 
PG2214TK
RECOMMENDED SOLDERING CONDITIONS
This product should be soldered and mounted under the following recommended conditions. For soldering
methods and conditions other than those recommended below, contact your nearby sales office.
Soldering Method
Infrared Reflow
VPS
Wave Soldering
Partial Heating
Soldering Conditions
Peak temperature (package surface temperature)
Time at peak temperature
Time at temperature of 220C or higher
Preheating time at 120 to 180C
Maximum number of reflow processes
Maximum chlorine content of rosin flux (% mass)
Peak temperature (package surface temperature)
Time at temperature of 200C or higher
Preheating time at 120 to 150C
Maximum number of reflow processes
Maximum chlorine content of rosin flux (% mass)
Peak temperature (molten solder temperature)
Time at peak temperature
Preheating temperature (package surface temperature)
Maximum number of flow processes
Maximum chlorine content of rosin flux (% mass)
Peak temperature (pin temperature)
Soldering time (per side of device)
Maximum chlorine content of rosin flux (% mass)
: 260C or below
: 10 seconds or less
: 60 seconds or less
: 12030 seconds
: 3 times
: 0.2%(Wt.) or below
: 215C or below
: 25 to 40 seconds
: 30 to 60 seconds
: 3 times
: 0.2%(Wt.) or below
: 260C or below
: 10 seconds or less
: 120C or below
: 1 time
: 0.2%(Wt.) or below
: 350C or below
: 3 seconds or less
: 0.2%(Wt.) or below
Condition Symbol
IR260
VP215
W S260
HS350
Caution Do not use different soldering methods together (except for partial heating).
Data Sheet PG10475EJ04V0DS
11
Free Datasheet http://www.datasheet4u.com/
11 Page | ||
| Páginas | Total 12 Páginas | |
| PDF Descargar | [ Datasheet UPG2214TK.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| UPG2214TB | NECs W LOW VOLTAGE L/ S-BAND SPDT SWITCH |  NEC |
| UPG2214TB-E4-A | NECs W LOW VOLTAGE L/ S-BAND SPDT SWITCH | NEC |
| UPG2214TK | NEC1/2W LOW VOLTAGE L/ S-BAND SPDT SWITCH |  ETC |
| UPG2214TK | L. S-BAND SPDT SWITCH | CEL |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |