G150XG01-V2 Datasheet PDF - AUO
Part Number | G150XG01-V2 | |
Description | LCD Module | |
Manufacturers | AUO | |
Logo | ||
There is a preview and G150XG01-V2 download ( pdf file ) link at the bottom of this page. Total 29 Pages |
Preview 1 page No Preview Available ! www.DataSheet4U.net
Avnet Embedded.
Support Around The Board™
Avnet Embedded
Specification.
Datasheet
AUO G150XG01-V2
www.avnet-embedded.eu
|
|
www.DataSheet4U.net
G150XG01 V2
1. Operating Precautions
1) Since front polarizer is easily damaged, please be cautious and not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or
spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or soft cloth.
5) Since the panel is made of glass, it may be broken or cracked if dropped or bumped on
hard surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure human
earth when handling.
7) Do not open nor modify the module assembly.
8) Do not press the reflector sheet at the back of the module to any direction.
9) In case if a module has to be put back into the packing container slot after it was taken
out from the container, do not press the center of the LED Reflector edge. Instead,
press at the far ends of the LED Reflector edge softly. Otherwise the TFT Module may
be damaged.
10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor
tilt the Interface Connector of the TFT Module.
11) TFT-LCD Module is not allowed to be twisted & bent even force is added on module in a very
short time. Please design your display product well to avoid external force applying to module
by end-user directly.
12) Small amount of materials without flammability grade are used in the TFT-LCD module. The
TFT-LCD module should be supplied by power complied with requirements of Limited Power
Source (IEC60950 or UL1950), or be applied exemption.
13) Severe temperature condition may result in different luminance, response time.
14) Continuous operating TFT-LCD Module under high temperature environment may accelerate
LED light bar exhaustion and reduce luminance dramatically.
15) The data on this specification sheet is applicable when TFT-LCD module is placed in
landscape position.
16) Continuous displaying fixed pattern may induce image sticking. It’s recommended to use
screen saver or moving content periodically if fixed pattern is displayed on the screen.
G150XG01 V2 rev 0.0
4/27
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for G150XG01-V2 electronic component. |
Information | Total 29 Pages | |
Link URL | [ Copy URL to Clipboard ] | |
Download | [ G150XG01-V2.PDF Datasheet ] |
Share Link :
Electronic Components Distributor
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
Part Number | Description | MFRS |
G150XG01-V0 | The function is LCD Module. AUO | |
G150XG01-V1 | The function is LCD Module. AUO | |
G150XG01-V2 | The function is LCD Module. AUO | |
Semiconductors commonly used in industry:
1N4148 |  
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
G150
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA |