DataSheet39.com

G084SN05-V1 Datasheet PDF - AUO

Part Number G084SN05-V1
Description LCD Module
Manufacturers AUO 
Logo AUO Logo 

Preview ( 27 pages )
		
G084SN05-V1 datasheet, circuit
www.speclcd.comwww.DataSheet4U.net
Spec. No.: MDGD084-SN05-2
Version:
0.2
Total pages:
27
Date:
2004-August-30
AU OPTRONICS CORPORATION
Product Functional Specifications
8.4SVGA Color TFT-LCD Module with Touch Panel
Model Name: G084SN05 V.1
Approved by
Martin Sun
Prepared by
Cynthia Lin
GD- MDBU Marketing Division / AU Optronics Croporation
Customer
Checked & Approved by
(C) Copyright AU Optroncis, Inc.
2004 All Right Reserved.
No Reproduction and Redistribution Allowed.
G084SN05 V.1 ver.0.2
www.speclcd.com
1/1

No Preview Available !


1 page
line_dark_gray
G084SN05-V1 equivalent
www.speclcd.comwww.DataSheet4U.net
1.0 Handing Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Be sure to turn off power supply when inserting or disconnection from input
connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration
or spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or bumped on
hard surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure
human earth when handling.
7) Do not open nor modify the module Assembly.
8) Do not press the reflector sheet at the back of the module to any directions.
9) In case if a module has to be put back into the packing container slot after once it
was taken out from the container, do not press the center of the CCFL Reflector
edge. Instead, press at the far ends of the CFL Reflector edge softly. Otherwise
the TFT module may be damaged.
10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate
nor tilt the interface Connector of the TFT module.
11) After installation of the TFT module into an enclosure, do not twist nor bend the
TFT module even momentary. At designing the enclosure, it should be taken into
consideration that no bending/twisting forces are applied to the TFT module from
outside. Otherwise the TFT module may be damaged.
12) Cold cathode fluorescent lamp in LCD contains a small amount of mercury. Please
follow local ordinances or regulations for disposal.
13) Small amount of materials having no flammability grade is used in the LCD
module should be supplied by power complied with requirements of Limited Power
Source, or be applied exemption.
14) The LCD module is designed so that the CFL in it is supplied by Limited Current
Circuit. Do not connect the CFL in Hazardous Voltage Circuit.
(C) Copyright AU Optroncis, Inc.
2004 All Right Reserved.
No Reproduction and Redistribution Allowed.
G084SN05 V.1 ver.0.2
www.speclcd.com
5/5

5 Page
line_dark_gray


Information Total 27 Pages
Download[ G084SN05-V1.PDF Datasheet ]

Share Link :

Electronic Components Distributor

SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Element14 Chip One Stop



Featured Datasheets

Part NumberDescriptionManufacturers
G084SN05-V0The function is LCD Module.AUO
AUO
G084SN05-V1The function is LCD Module.AUO
AUO
G084SN05-V2The function is Color TFT-LCD Module.AUO
AUO

Quick jump to:

G084  1N4  2N2  2SA  2SC  74H  ADC  BC  BF  BU  CXA  HCF  IRF  KA  KIA  LA  LM  MC  NE  ST  STK  TDA  TL  UA 


DataSheet39.com is an Online Datasheet PDF Search Site.
It offers a large amount of data sheet, You can free PDF files download.
The updated every day, always provide the best quality and speed.



keyword : G084SN05-V1 schematic, G084SN05-V1 equivalent, G084SN05-V1 pinout

DataSheet39.com   |  2018   |  Privacy Policy |  Contact Us  | New  |  Search