|
|
PDF G220SW02-V0 Data sheet ( Hoja de datos )
| Número de pieza | G220SW02-V0 | |
| Descripción | LCD Module | |
| Fabricantes | AUO | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de G220SW02-V0 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
www.fortecag.de | [email protected] | 01803-367832 - FORTEC (9 ct. pro Minute)
Produktspezifikation für AUO G220SW02 V0
Im Programm von
Achtung:
Dieses Dokument unterliegt nicht dem Änderungsdienst. Der Stand
entspricht der Drucklegung. Bitte informieren Sie sich vor Verwendung
ob die technischen Daten noch dem aktuellen Stand entsprechen. Trotz
sorgfältiger Kontrolle können wir leider keine Haftung für Druckfehler
oder Irrtümer übernehmen.
www.DataSheet4U.net
1 page  
www.fortecag.de |
[email protected] | 01803-367832 - FORTEC (9 ct. pro Minute)
Product Specification
AU OPTRONICS CORPORATION
G220SW02 V0
1. Operating Precautions
1) Display area (Polarizer) of TFT-LCD Module is easily to be damaged, please be cautious and
not to scratch it.
2) Be sure to power off your machine before connecting or disconnecting your signal cable to
TFT-LCD Module.
3) Wipe off water drop on display area immediately. Long contact with water may cause
discoloration or spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or soft cloth.
5) Display area (Glass) of TFT-LCD Module may be broken or cracked if bump Module against
hard object.
6) To avoid ESD (Electro Static Discharde) damage, be sure to ground yourself before handling
TFT-LCD Module.
7) Do not open nor modify the TFT-LCD module assembly.
8) Do not press the reflector sheet at the back of the module to any direction.
9) In case if TFT-LCD module has to be put back into the packing container slot after it was taken
out from the container, do not press the center of the LED Reflector edge. Instead, press at the
far ends of the LED Reflector edge softly. Otherwise the TFT-LCD Module may be damaged.
10) When inserting or removing of your signal cable to TFT-LCD Module, be sure not to apply
abnormal force (rotate, tilt…etc.) to the Connector of the TFT-LCD Module.
11) TFT-LCD Module is not allowed to be twisted & bent even force is added on module in a very
short time. Please design your display product well to avoid external force applying to module
by end-user directly.
12) Small amount of materials without flammability grade are used in the TFT-LCD module. The
TFT-LCD module should be supplied by power complied with requirements of Limited Power
Source (IEC60950 or UL1950), or be applied exemption.
13) Severe temperature condition may result in different luminance, response time.
14) Continuous operating TFT-LCD Module under high temperature environment may accelerate
LED light bar exhaustion and reduce luminance dramatically.
15) The data on this specification sheet is applicable when TFT-LCD module is placed in
landscape position.
16) Continuous displaying fixed pattern may induce image sticking. It’s recommended to use
screen saver or moving content periodically if fixed pattern is displayed on the screen.
document version 0.2
4
5 Page 
www.fortecag.de |
[email protected] | 01803-367832 - FORTEC (9 ct. pro Minute)
Product Specification
AU OPTRONICS CORPORATION
G220SW02 V0
3. Functional Block Diagram
The following diagram shows the functional block of the 22 inches wide Color TFT-LCD Module:
Gamma
Correction
5.5V
LVDS
DC/ DC
Converter
D1 D5040
G1 Source Driver IC
LVDS
Timing
Controlle
r
AU ASIC
G1050
TFT-LCD
1680(3)*1050
Pixels
LED B/L
LED Driver
Barrier Cell
Connecter
3D On/Off,
3.3V 60Hz
LVDS Connector: Hirose (MDF76URW-30S-1H) or equivalent.
LED Connector: Hirose (DF14H-20P-1.25H(56) ) or equivalent.
DC Power, 12V
document version 0.2
10
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet G220SW02-V0.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| G220SW02-V0 | LCD Module | AUO |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |