DataSheet39.com

What is 73S8009R?

This electronic component, produced by the manufacturer "Teridian Semiconductor", performs the same function as "Low Cost Versatile Smart Card Interface".


73S8009R Datasheet PDF - Teridian Semiconductor

Part Number 73S8009R
Description Low Cost Versatile Smart Card Interface
Manufacturers Teridian Semiconductor 
Logo Teridian Semiconductor Logo 


There is a preview and 73S8009R download ( pdf file ) link at the bottom of this page.





Total 23 Pages



Preview 1 page

No Preview Available ! 73S8009R datasheet, circuit

Simplifying System Integration™
DS_8009R_056
73S8009Rwww.DataSheet4U.com
Low Cost Versatile Smart Card
Interface
DATA SHEET
October 2009
DESCRIPTION
The 73S8009R is a very low-cost level shifter, single
smart card (ICC) interface IC. The device includes a
level shifter interface between a 3.3 V (typical) logic
circuitry (host microcontroller) and an ISO-7816 /
EMV smart card. The 73S8009R is designed to
provide full electrical compliance with ISO-7816-3
EMV4.1 (EMV2000) and GSM11-11 specifications.
In normal operating mode, for maximum designer
flexibility, the host microcontroller is responsible for
card activation and deactivation. The 73S8009R
incorporates an ISO-7816-3 deactivation sequencer
that controls the card signals in case of fault detection
and card removal. Card presence and faults are
reported to the host through an interrupt output.
When the 73S8009R is ready to support a card with
the selected voltage, a RDY signal informs the host it
can initiate the card activation sequence.
The 73S8009R supports 5V, 3V and 1.8V cards.
Selection is done through 2 dedicated digital inputs.
Level-shifters drive the card signals with the selected
card voltage coming from an internal Low Drop-Out
(LDO) voltage regulator. The LDO regulator is
powered by a dedicated power supply input, VPC.
Digital circuitry is separately powered by a digital
power supply, VDD.
Emergency card deactivation is initiated upon card
extraction or any fault generated by the protection
circuitry. The fault can be a card over-current, a VDD
(digital power), a VPC (regulator power), a VCC
(card power output) or an over-heating fault.
A chip select digital input drives internal latches that
allow the host controller to control multiple
73S8009R ICs in parallel. A power down digital
input also allows the host microcontroller to place
the IC in a very low-power mode making the
73S8009R particularly suitable for low-power and
battery-powered applications.
Auxiliary I/O lines are also available (SO28 package
only) and make the 73S8009R suitable for all kind
of cards, including synchronous (memory) cards.
APPLICATIONS
Set-Top-Box Conditional Access and
Pay-per-View
SIM card readers in DECT and GSM phones,
GPRS, WIFI and VOIP devices
Point of Sales & Transaction Terminals
General purpose smart card readers
ADVANTAGES
Lowest cost smart card interface IC on the
market
Ideal to replace discrete designs in POS
terminals and Set-Top-Boxes
Traditional step-up converter is replaced by
an LDO regulator
Greatly reduced power dissipation
Fewer external components are required
Better noise performance
Very low power dissipation
Small format (4x4x0.8 mm) QFN20 package
option
FEATURES
Card Interface:
Complies with ISO-7816-3, EMV 4.0 and
GSM 11-11 specifications
An LDO voltage regulator provides 1.8V /
3V / 5V to the card from an external power
supply input
Provides at least 90 mA to the card
ISO-7816-3 card emergency deactivation
sequencer
Protection includes 3 voltage supervisors
that detect voltage drops on VCC (card), VDD
(digital) and VPC (regulator) power supplies
Over-current detection, 150 mA max.
2 card detection inputs, 1 for each user
polarity
Auxiliary I/O lines for C4 / C8 contact
signals
Card CLK clock frequency up to 20 MHz
Rev. 1.3
© 2009 Teridian Semiconductor Corporation
1

line_dark_gray
73S8009R equivalent
DS_8009R_056
73S8009RwwDwa.DtaataSShheeete4Ut .com
1 Pinout
The 73S8009R is supplied as a 20-pin QFN package and as a 28-pin SO package.
I/OUC 1
CMDVCC% 2
CMDVCC# 3
RSTIN 4
CLKIN 5
TERIDIAN
73S8009R
15 I/O
14 VCC
13 RST
12 GND
11 CLK
Figure 2: 73S8009R 20-Pin QFN Pinout
CS
TEST1
N/C
OFF
I/OUC
AUX1UC
AUX2UC
CMDVCC%
CMDVCC#
RSTIN
CLKIN
RDY
PWRDN
TEST2
(Top View)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
28 VDD
27 GND
26 PRES
25 I/O
24 AUX1
23 AUX2
22 VCC
21 RST
20 GND
19 CLK
18 N/C
17 N/C
16 PRES
15 VPC
Figure 3: 73S8009R 28-Pin SO Pinout
Rev. 1.3
5


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for 73S8009R electronic component.


Information Total 23 Pages
Link URL [ Copy URL to Clipboard ]
Download [ 73S8009R.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
73S8009CThe function is Versatile Power Management and Smart Card Interface IC. Teridian SemiconductorTeridian Semiconductor
73S8009CNThe function is Combo ISO-7816 and USB Universal Smart Card Interface IC. Teridian SemiconductorTeridian Semiconductor
73S8009RThe function is Low Cost Versatile Smart Card Interface. Teridian SemiconductorTeridian Semiconductor

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

73S8     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search