DataSheet39.com

What is 74LVC1G175?

This electronic component, produced by the manufacturer "NXP Semiconductors", performs the same function as "Single D-type flip-flop".


74LVC1G175 Datasheet PDF - NXP Semiconductors

Part Number 74LVC1G175
Description Single D-type flip-flop
Manufacturers NXP Semiconductors 
Logo NXP Semiconductors Logo 


There is a preview and 74LVC1G175 download ( pdf file ) link at the bottom of this page.





Total 20 Pages



Preview 1 page

No Preview Available ! 74LVC1G175 datasheet, circuit

74LVC1G175
Single D-type flip-flop with reset; positive-edge trigger
Rev. 6 — 11 October 2013
Product data sheet
1. General description
The 74LVC1G175 is a low-power, low-voltage single positive edge triggered D-type
flip-flop with individual data (D) input, clock (CP) input, master reset (MR) input, and Q
output.
The master reset (MR) is an asynchronous active LOW input and operates independently
of the clock input. Information on the data input is transferred to the Q output on the
LOW-to-HIGH transition of the clock pulse. The D input must be stable one set-up time
prior to the LOW-to-HIGH clock transition for predictable operation.
The inputs can be driven from either 3.3 V or 5 V devices. This feature allows the use of
this device in a mixed 3.3 V and 5 V environment.
This device is fully specified for partial power-down applications using IOFF. The IOFF
circuitry disables the output, preventing the damaging backflow current through the device
when it is powered down.
Schmitt trigger action at all inputs makes the circuit highly tolerant of slower input rise and
fall times.
2. Features and benefits
Wide supply voltage range from 1.65 V to 5.5 V
5 V tolerant inputs for interfacing with 5 V logic
High noise immunity
Complies with JEDEC standard:
JESD8-7 (1.65 V to 1.95 V)
JESD8-5 (2.3 V to 2.7 V)
JESD8B/JESD36 (2.7 V to 3.6 V).
ESD protection:
HBM JESD22-A114F exceeds 2000 V
MM JESD22-A115-A exceeds 200 V.
24 mA output drive (VCC = 3.0 V)
CMOS low power consumption
Latch-up performance exceeds 250 mA
Direct interface with TTL levels
Inputs accept voltages up to 5 V
Multiple package options
Specified from 40 C to +85 C and 40 C to +125 C.

line_dark_gray
74LVC1G175 equivalent
NXP Semiconductors
74LVC1G175
Single D-type flip-flop with reset; positive-edge trigger
9. Recommended operating conditions
Table 6.
Symbol
VCC
VI
VO
Tamb
t/V
Recommended operating conditions
Parameter
Conditions
supply voltage
input voltage
output voltage
Active mode
ambient temperature
Power-down mode; VCC = 0 V
input transition rise and fall rate VCC = 1.65 V to 2.7 V
VCC = 2.7 V to 5.5 V
10. Static characteristics
Min Typ
1.65 -
0-
0-
0-
40 -
--
--
Max
5.5
5.5
VCC
5.5
+125
20
10
Unit
V
V
V
V
C
ns/V
ns/V
Table 7. Static characteristics
At recommended operating conditions. Voltages are referenced to GND (ground = 0 V).
Symbol Parameter
Conditions
Min
Tamb = 40 C to +85 C
VIH HIGH-level input voltage VCC = 1.65 V to 1.95 V
0.65 VCC
VCC = 2.3 V to 2.7 V
1.7
VCC = 2.7 V to 3.6 V
2.0
VCC = 4.5 V to 5.5 V
0.7 VCC
VIL LOW-level input voltage VCC = 1.65 V to 1.95 V
-
VCC = 2.3 V to 2.7 V
-
VCC = 2.7 V to 3.6 V
-
VCC = 4.5 V to 5.5 V
-
VOH HIGH-level output voltage VI = VIH or VIL
IO = 100 A; VCC = 1.65 V to 5.5 V
VCC 0.1
IO = 4 mA; VCC = 1.65 V
1.2
IO = 8 mA; VCC = 2.3 V
1.9
IO = 12 mA; VCC = 2.7 V
2.2
IO = 24 mA; VCC = 3.0 V
2.3
IO = 32 mA; VCC = 4.5 V
3.8
VOL LOW-level output voltage VI = VIH or VIL
IO = 100 A; VCC = 1.65 V to 5.5 V
-
IO = 4 mA; VCC = 1.65 V
-
IO = 8 mA; VCC = 2.3 V
-
IO = 12 mA; VCC = 2.7 V
-
IO = 24 mA; VCC = 3.0 V
-
IO = 32 mA; VCC = 4.5 V
-
II
input leakage current
VCC = 0 V to 5.5 V; VI = 5.5 V or GND [2] -
IOFF power-off leakage current VCC = 0 V; VI or VO = 5.5 V
-
Typ[1] Max
--
--
--
--
- 0.35 VCC
- 0.7
- 0.8
- 0.3 VCC
--
1.54 -
2.15 -
2.50 -
2.62 -
4.11 -
- 0.10
0.07 0.45
0.12 0.30
0.17 0.40
0.33 0.55
0.39 0.55
0.1 5
0.1 10
Unit
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
A
A
74LVC1G175
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 6 — 11 October 2013
© NXP B.V. 2013. All rights reserved.
5 of 20


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for 74LVC1G175 electronic component.


Information Total 20 Pages
Link URL [ Copy URL to Clipboard ]
Download [ 74LVC1G175.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
74LVC1G17The function is Single Schmitt-trigger buffer. NXP SemiconductorsNXP Semiconductors
74LVC1G17The function is SINGLE SCHMITT-TRIGGER BUFFER. DiodesDiodes
74LVC1G175The function is Single D-type flip-flop. NXP SemiconductorsNXP Semiconductors

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

74LV     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search