|
|
PDF STK433-040-E Data sheet ( Hoja de datos )
| Número de pieza | STK433-040-E | |
| Descripción | 2-Channel Class AB Audio Power IC | |
| Fabricantes | Sanyo | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de STK433-040-E (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
|
No Preview Available !
Ordering number : EN*A1470
www.DataSheet4U.com
STK433-040-E
Thick-Film Hybrid IC
2-channel class AB audio power IC,
40W+40W
Overview
The STK433-040-E is a hybrid IC designed to be used in 40W × 2ch class AB audio power amplifiers.
Applications
• Audio power amplifiers.
Features
• Pin-to-pin compatible outputs ranging from 30W to 60W.
• Can be used to replace the STK433-200 series (3-channel) due to its pin compatibility.
• Miniature package (47.0mm × 25.6mm × 9.0mm)
• Output load impedance: RL = 6Ω to 4Ω supported
• Allowable load shorted time: 0.3 second
• Allows the use of predesigned applications for standby and mute circuits.
Series Models
Output 1 (10%/1kHz)
Output 2 (0.4%/20Hz to 20kHz)
Max. rated VCC (quiescent)
Max. rated VCC (6Ω)
Max. rated VCC (4Ω)
Recommended operating VCC (6Ω)
Dimensions (excluding pin height)
STK433-030-E
30W×2 channels
20W×2 channels
±34V
±32V
±26V
±21V
STK433-040-E
STK433-060-E
40W×2 channels
50W×2 channels
25W×2 channels
35W×2 channels
±38V
±46V
±36V
±40V
±30V
±33V
±24V
±27V
47.0mm×25.6mm×9.0mm
STK433-070-E
60W×2 channels
40W×2 channels
±50V
±44V
±37V
±29V
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
42809HKIM No. A1470-1/11
1 page  
STK433-040-E
www.DaStaTShKee4t43U3.c-o0m00/-200/STK403-100Sr PCB PARTS LIST
PCB Name: STK403-000Sr/100Sr/200Sr PCBA
Location No. (*3)
PARTS
RATING
Hybrid IC#1 Pin Position
--
R01
ERG1SJ101
100Ω, 1W
R02, R03 (R4)
RN16S102FK
1kΩ, 1/6W
R05, R06, R08, R09 (R7, R10)
RN16S563FK
56kΩ, 1/6W
R11, R12 (R13)
RN16S182FK
1.8kΩ, 1/6W
R14, R15 (R16)
RN14S4R7FK
4.7Ω, 1/4W
R17, R18 (R19)
ERX1SJ4R7
4.7Ω, 1W
R20, R21 (R22)
ERX2SJR22
0.22Ω, 2W
C01, C02, C03
100MV100HC
100μF, 100V
C04, C05 (C06)
50MV2R2HC
2.2μF, 50V
C07, C08 (C09)
DD104-63B471K50
470pF, 50V
C10, C11 (C12)
DD104-63CJ030C50
3pF, 50V
C13, C14 (C15)
10MV10HC
10μF, 10V
C16, C17 (C18)
ECQ-V1H104JZ
0.1μF, 50V
C19, C20 (C21)
DD104-63B***K50
***pF, 50V
R34, R35 (R36)
RN16S302FK
3kΩ, 1/6W
L01, L02 (L3)
- 3μH
Stand-By Control Circuit Tr1
2SC2274 (Reference)
VCE≥50V, IC≥10mA
D1 GMB01 (Reference)
Di
R30 RN16S512FK
5.1kΩ, 1/6W
RN16S103FK
13kΩ, 1/6W
R31 RN16S333FK
33kΩ, 1/6W
R32 RN16S102FK
1kΩ, 1/6W
R33 RN16S202FK
2kΩ, 1/6W
C32 10MV33HC
33μF, 10V
J1, J2, J3, J4, J5, J6, J8, J9
-
-
J7, JS2, JS3, JS4, JS5, JS7 JS8, JS9
-
-
JS6, JS10
--
JS1 -
(*1) Capacitor mark “A” side is “-” (negative).
(*2) STK433-200Sr (3ch) is 8pF use.
(*3) Location No.( ) parts is STK433-200Sr (3ch) only use.
-
Component
STK433-030/-040
STK433-060/-070
STK433-230/-240
STK433-260/-270
STK403-090 to130
c
enable
enable
enable
enable
enable
enable
short
enable
enable
enable (*1)
enable
enable (*2)
enable (*1)
enable
100pF
Short
enable
enable
enable
STK433-*00series
STK403-100series
enable
enable
enable
enable
enable
-
enable
enable
No. A1470-5/11
5 Page 
www.DataSheet4U.com
STK433-040-E
SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using
products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition
ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd.
products described or contained herein.
SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all
semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or
malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise
to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt
safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not
limited to protective circuits and error prevention circuits for safe design, redundant design, and structural
design.
In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are
controlled under any of applicable local export control laws and regulations, such products may require the
export license from the authorities concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise,
without the prior written consent of SANYO Semiconductor Co.,Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the
SANYO Semiconductor Co.,Ltd. product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed
for volume production.
Upon using the technical information or products described herein, neither warranty nor license shall be granted
with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third
party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's
intellectual property rights which has resulted from the use of the technical information and products mentioned
above.
This catalog provides information as of April, 2009. Specifications and information herein are subject
to change without notice.
PS No. A1470-11/11
11 Page | ||
| Páginas | Total 11 Páginas | |
| PDF Descargar | [ Datasheet STK433-040-E.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| STK433-040-E | 2-Channel Class AB Audio Power IC | Sanyo |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |