DataSheet.es    


PDF 10F222 Data sheet ( Hoja de datos )

Número de pieza 10F222
Descripción PIC10F222
Fabricantes Microchip Technology 
Logotipo Microchip Technology Logotipo



Hay una vista previa y un enlace de descarga de 10F222 (archivo pdf) en la parte inferior de esta página.


Total 30 Páginas

No Preview Available ! 10F222 Hoja de datos, Descripción, Manual

www.DataSheet4U.com
PIC10F220/222
Data Sheet
6-Pin, 8-Bit Flash Microcontrollers
© 2006 Microchip Technology Inc.
Preliminary
DS41270B

1 page




10F222 pdf
PIC10F220/222
Table of Contents
1.0 General Description...................................................................................................................................................................... 5
2.0 Device Varieties .......................................................................................................................................................................... 7
3.0 Architectural Overview ................................................................................................................................................................. 9
4.0 Memory Organization ................................................................................................................................................................. 13
5.0 I/O Port ....................................................................................................................................................................................... 21
6.0 TMR0 Module and TMR0 Register............................................................................................................................................. 25
7.0 Analog-to-Digital (A/D) converter ............................................................................................................................................... 29
8.0 Special Features Of The CPU.................................................................................................................................................... 33
9.0 Instruction Set Summary ............................................................................................................................................................ 43
10.0 Electrical Characteristics ............................................................................................................................................................ 51
11.0 Development Support................................................................................................................................................................. 61
12.0 DC and AC Characteristics Graphs and Charts ......................................................................................................................... 65
13.0 Packaging Information................................................................................................................................................................ 67
Index .................................................................................................................................................................................................... 71
The Microchip Web Site ....................................................................................................................................................................... 73
Customer Change Notification Service ................................................................................................................................................ 73
Customer Support ................................................................................................................................................................................ 73
Reader Response ................................................................................................................................................................................ 74
Product Identification System .............................................................................................................................................................. 75
www.DataSheet4U.com
TO OUR VALUED CUSTOMERS
It is our intention to provide our valued customers with the best documentation possible to ensure successful use of your Micro-
chip products. To this end, we will continue to improve our publications to better suit your needs. Our publications will be refined
and enhanced as new volumes and updates are introduced.
If you have any questions or comments regarding this publication, please contact the Marketing Communications Department via
E-mail at [email protected] or fax the Reader Response Form in the back of this data sheet to (480) 792-4150.
We welcome your feedback.
Most Current Data Sheet
To obtain the most up-to-date version of this data sheet, please register at our Worldwide Web site at:
http://www.microchip.com
You can determine the version of a data sheet by examining its literature number found on the bottom outside corner of any page.
The last character of the literature number is the version number, (e.g., DS30000A is version A of document DS30000).
Errata
An errata sheet, describing minor operational differences from the data sheet and recommended workarounds, may exist for current
devices. As device/documentation issues become known to us, we will publish an errata sheet. The errata will specify the revision
of silicon and revision of document to which it applies.
To determine if an errata sheet exists for a particular device, please check with one of the following:
• Microchip’s Worldwide Web site; http://www.microchip.com
• Your local Microchip sales office (see last page)
• The Microchip Corporate Literature Center; U.S. FAX: (480) 792-7277
When contacting a sales office or the literature center, please specify which device, revision of silicon and data sheet (include lit-
erature number) you are using.
Customer Notification System
Register on our web site at www.microchip.com/cn to receive the most current information on all of our products.
© 2006 Microchip Technology Inc.
Preliminary
DS41270B-page 3

5 Page





10F222 arduino
3.0 ARCHITECTURAL OVERVIEW
The high performance of the PIC10F220/222 devices
can be attributed to a number of architectural features
commonly found in RISC microprocessors. To begin
with, the PIC10F220/222 devices use a Harvard archi-
tecture in which program and data are accessed on
separate buses. This improves bandwidth over tradi-
tional von Neumann architectures where program and
data are fetched on the same bus. Separating program
and data memory further allows instructions to be sized
differently than the 8-bit wide data word. Instruction
opcodes are 12 bits wide, making it possible to have all
single-word instructions. A 12-bit wide program mem-
ory access bus fetches a 12-bit instruction in a single
cycle. A two-stage pipeline overlaps fetch and execu-
tion of instructions. Consequently, all instructions (33)
execute in a single cycle (1 μs @ 4 MHz or 500 ns @
8 MHz) except for program branches.
www.DataSheet4TUhe.ctaobmle below lists program memory (Flash) and data
memory (RAM) for the PIC10F220/222 devices.
Device
PIC10F220
PIC10F222
Memory
Program
256 x 12
512 x 12
Data
16 x 8
23 x 8
The PIC10F220/222 devices can directly or indirectly
address its register files and data memory. All Special
Function Registers (SFR), including the PC, are
mapped in the data memory. The PIC10F220/222
devices have a highly orthogonal (symmetrical) instruc-
tion set that makes it possible to carry out any opera-
tion, on any register, using any addressing mode. This
symmetrical nature and lack of “special optimal situa-
tions” make programming with the PIC10F220/222
devices simple, yet efficient. In addition, the learning
curve is reduced significantly.
PIC10F220/222
The PIC10F220/222 devices contain an 8-bit ALU and
working register. The ALU is a general purpose arith-
metic unit. It performs arithmetic and Boolean functions
between data in the working register and any register
file.
The ALU is 8-bits wide and capable of addition, sub-
traction, shift and logical operations. Unless otherwise
mentioned, arithmetic operations are two’s comple-
ment in nature. In two-operand instructions, one oper-
and is typically the W (working) register. The other
operand is either a file register or an immediate
constant. In single operand instructions, the operand is
either the W register or a file register.
The W register is an 8-bit working register used for ALU
operations. It is not an addressable register.
Depending on the instruction executed, the ALU may
affect the values of the Carry (C), Digit Carry (DC) and
Zero (Z) bits in the STATUS register. The C and DC bits
operate as a borrow and digit borrow out bit, respec-
tively, in subtraction. See the SUBWF and ADDWF
instructions for examples.
A simplified block diagram is shown in Figure 3-1 with
the corresponding device pins described in Table 3-1.
© 2006 Microchip Technology Inc.
Preliminary
DS41270B-page 9

11 Page







PáginasTotal 30 Páginas
PDF Descargar[ Datasheet 10F222.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
10F222PIC10F222Microchip Technology
Microchip Technology

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar