DataSheet39.com

What is LM2594HVN-ADJ?

This electronic component, produced by the manufacturer "National Semiconductor", performs the same function as "SIMPLE SWITCHER Power Converter 150 kHz 0.5A Step-Down Voltage Regulator".


LM2594HVN-ADJ Datasheet PDF - National Semiconductor

Part Number LM2594HVN-ADJ
Description SIMPLE SWITCHER Power Converter 150 kHz 0.5A Step-Down Voltage Regulator
Manufacturers National Semiconductor 
Logo National Semiconductor Logo 


There is a preview and LM2594HVN-ADJ download ( pdf file ) link at the bottom of this page.





Total 28 Pages



Preview 1 page

No Preview Available ! LM2594HVN-ADJ datasheet, circuit

December 1999
LM2594/LM2594HV
SIMPLE SWITCHER® Power Converter 150 kHz 0.5A
Step-Down Voltage Regulator
General Description
The LM2594/LM2594HV series of regulators are monolithic
integrated circuits that provide all the active functions for a
step-down (buck) switching regulator, capable of driving a
0.5A load with excellent line and load regulation. These de-
vices are available in fixed output voltages of 3.3V, 5V, 12V,
and an adjustable output version, and are packaged in a
8-lead DIP and a 8-lead surface mount package.
Requiring a minimum number of external components, these
regulators are simple to use and feature internal frequency
compensation, a fixed-frequency oscillator, and improved
line and load regulation specifications.
The LM2594/LM2594HV series operates at a switching fre-
quency of 150 kHz thus allowing smaller sized filter compo-
nents than what would be needed with lower frequency
switching regulators. Because of its high efficiency, the cop-
per traces on the printed circuit board are normally the only
heat sinking needed.
A standard series of inductors (both through hole and sur-
face mount types) are available from several different manu-
facturers optimized for use with the LM2594/LM2594HV se-
ries. This feature greatly simplifies the design of
switch-mode power supplies.
Other features include a guaranteed ±4% tolerance on out-
put voltage under all conditions of input voltage and output
load conditions, and ±15% on the oscillator frequency. Ex-
ternal shutdown is included, featuring typically 85 µA
standby current. Self protection features include a two stage
frequency reducing current limit for the output switch and an
over temperature shutdown for complete protection under
fault conditions.
The LM2594HV is for applications requiring an input voltage
up to 60V.
Features
n 3.3V, 5V, 12V, and adjustable output versions
n Adjustable version output voltage range, 1.2V to 37V
(57V for the HV version)±4% max over line and load
conditions
n Available in 8-pin surface mount and DIP-8 package
n Guaranteed 0.5A output current
n Input voltage range up to 60V
n Requires only 4 external components
n 150 kHz fixed frequency internal oscillator
n TTL Shutdown capability
n Low power standby mode, IQ typically 85 µA
n High Efficiency
n Uses readily available standard inductors
n Thermal shutdown and current limit protection
Applications
n Simple high-efficiency step-down (buck) regulator
n Efficient pre-regulator for linear regulators
n On-card switching regulators
n Positive to Negative convertor
Typical Application (Fixed Output Voltage Versions)
DS012439-1
SIMPLE SWITCHER and Switchers Made Simpleare registered trademarks of National Semiconductor Corporation.
© 1999 National Semiconductor Corporation DS012439
www.national.com

line_dark_gray
LM2594HVN-ADJ equivalent
All Output Voltage Versions
Electrical Characteristics (Continued)
Note 2: The human body model is a 100 pF capacitor discharged through a 1.5k resistor into each pin.
Note 3: Typical numbers are at 25˚C and represent the most likely norm.
Note 4: All limits guaranteed at room temperature (standard type face) and at temperature extremes (bold type face). All room temperature limits are 100% produc-
tion tested. All limits at temperature extremes are guaranteed via correlation using standard Statistical Quality Control (SQC) methods. All limits are used to calculate
Average Outgoing Quality Level (AOQL).
Note 5: External components such as the catch diode, inductor, input and output capacitors, and voltage programming resistors can affect switching regulator sys-
tem performance. When the LM2594/LM2594HV is used as shown in the Figure 1 test circuit, system performance will be as shown in system parameters section
of Electrical Characteristics.
Note 6: The switching frequency is reduced when the second stage current limit is activated. The amount of reduction is determined by the severity of current over-
load.
Note 7: No diode, inductor or capacitor connected to output pin.
Note 8: Feedback pin removed from output and connected to 0V to force the output transistor switch ON.
Note 9: Feedback pin removed from output and connected to 12V for the 3.3V, 5V, and the ADJ. version, and 15V for the 12V version, to force the output transistor
switch OFF.
Note 10: VIN = 40V for the LM2594 and 60V for the LM2594HV.
Note 11: Junction to ambient thermal resistance with approximately 1 square inch of printed circuit board copper surrounding the leads. Additional copper area will
lower thermal resistance further. See application hints in this data sheet and the thermal model in Switchers Made Simple® software.
Typical Performance Characteristics
Normalized
Output Voltage
Line Regulation
Efficiency
Switch Saturation
Voltage
DS012439-4
DS012439-5
Switch Current Limit
Dropout Voltage
DS012439-6
DS012439-7
DS012439-8
DS012439-9
5 www.national.com


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for LM2594HVN-ADJ electronic component.


Information Total 28 Pages
Link URL [ Copy URL to Clipboard ]
Download [ LM2594HVN-ADJ.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
LM2594HVN-ADJThe function is SIMPLE SWITCHER Power Converter 150 kHz 0.5A Step-Down Voltage Regulator. National SemiconductorNational Semiconductor

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

LM25     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search