|
|
PDF UPD78C14A Data sheet ( Hoja de datos )
| Número de pieza | UPD78C14A | |
| Descripción | 8-BIT SINGLE-CHIP MICROCONTROLLER WITH A/D CONVERTER | |
| Fabricantes | NEC | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de UPD78C14A (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
DATA SHEET
MOS INTEGRATED CIRCUIT
µPD78C14(A)
8-BIT SINGLE-CHIP MICROCONTROLLER (WITH A/D CONVERTER)
The µPD78C14(A) is a single-chip, CMOS 8-bit microcontroller in which a 16-bit ALU, a ROM, a RAM, an A/D converter,
a multifunction timer/event counter, and a serial interface are all integrated. Moreover, a 48-Kbyte external expansion
memory (ROM/RAM) can be connected.
Since the µPD78C14(A) uses the CMOS construction, its operations are performed with low power consumption. By
using the standby function, functions such as data retention are performed with lower power consumption.
For details on functions, refer to the User’s Manual listed below. Please read it before starting design work.
87AD series µPD78C18 User’s Manual: IEU-1314
FEATURES
High reliability as compared with µPD78C14
159 instructions: 87AD instruction set
Multiply and divide instructions, 16-bit arithmetic operation instructions
Instruction cycle: 0.8 µs at 15 MHz
Internal ROM: 16384 W x 8
Internal RAM: 256 W x 8
Direct addressing to an external memory (ROM/RAM) up to 64 Kbytes
Highly accurate 8-bit A/D converter: Eight analog inputs
General-purpose serial interface: Asynchronous, synchronous, and I/O interface modes
Multifunction 16-bit timer/event counter
Two 8-bit timers
I/O lines: 44
Interrupt functions: Three external, eight internal
• Non-maskable interrupt: 1
• Maskable interrupts: 10
Zero-cross detection function (two inputs)
Standby functions: HALT mode, Hardware/software STOP mode
ORDERING INFORMATION
Part number
µPD78C14G(A)-xxx-36
µPD78C14GF(A)-xxx-3BE
µPD78C14L(A)-xxx
Package
64-pin plastic QUIP
64-pin plastic QFP (14 x 20 mm)
68-pin plastic QFJ (950 x 950 mil)
Quality grade
Special
Special
Special
Remark xxx is a ROM code suffix.
Please refer to “Quality grade on NEC Semiconductor Devices” (Document number IEI-1209) published by
NEC Corporation to know the specification of quality grade on the devices and its recommended applications.
Document No. IC-2813B
(O.D. No. IC-8242B)
Date Published May 1995 P
Printed in Japan
The information in this document is subject to change without notice.
*H The mark shows revised points.
©© 11999914
1 page  
CONTENTS
µPD78C14(A)
1. DIFFERENCES BETWEEN µPD78C14(A) AND µPD78C14 ...................................................6
2. PIN FUNCTIONS ......................................................................................................................7
2.1 Pin Function List .........................................................................................................................7
2.2 Pin Input/Output Circuits ...........................................................................................................9
2.3 Recommended Connections for Unused Pins....................................................................... 13
3. INSTRUCTION SET ................................................................................................................14
3.1 Operand Expression Format/Description Method .................................................................14
3.2 Instruction Code Description ..................................................................................................16
3.3 Instruction Execution Time......................................................................................................17
4. LIST OF MODE REGISTERS .................................................................................................29
5. ELECTRICAL SPECIFICATIONS ..........................................................................................30
6. CHARACTERISTIC CURVES (reference value) ...................................................................41
7. PACKAGE DRAWINGS .........................................................................................................44
8. RECOMMENDED SOLDERING CONDITIONS .....................................................................47
APPENDIX DEVELOPMENT TOOLS ............................................................................................49
5
5 Page 
µPD78C14(A)
(5) Type 7
IN
AVDD
AVDD
P-ch
N-ch
AVSS
+
sampling
C
–
AVSS
reference voltage
(from voltage tap of serial resistor string)
(6) Type 8
output data
output disable
N-ch
N-ch
Type 5
Type 2
IN/OUT
(7) Type 9
IN
MCC
self bias
enable
(8) Type 10
Type 1
data
output data
output disable
N-ch
self bias
enable
N-ch
Type 5
Type 9
IN/OUT
MCC
11
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet UPD78C14A.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| UPD78C14 | 8-BIT SINGLE-CHIP MICROCONTROLLER WITH A/D CONVERTER | NEC |
| UPD78C14 | (UPD78C10 - UPD78C14) 8-BIT SINGLE-CHIP MICROCOMPUTER | NEC |
| UPD78C14A | 8-BIT SINGLE-CHIP MICROCONTROLLER WITH A/D CONVERTER | NEC |
| UPD78C14CW | (UPD78C10 - UPD78C14) 8-BIT SINGLE-CHIP MICROCOMPUTER | NEC |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |