DataSheet39.com

What is GS1525?

This electronic component, produced by the manufacturer "Gennum Corporation", performs the same function as "HD-LINX II Voltage Controlled Oscillator".


GS1525 Datasheet PDF - Gennum Corporation

Part Number GS1525
Description HD-LINX II Voltage Controlled Oscillator
Manufacturers Gennum Corporation 
Logo Gennum Corporation Logo 


There is a preview and GS1525 download ( pdf file ) link at the bottom of this page.





Total 9 Pages



Preview 1 page

No Preview Available ! GS1525 datasheet, circuit

www.DataSheet4U.com
Key Features
• generates 1.485GHz or 1.485/1.001GHz signal for
HD-LINXII ICs
• low current consumption
• 50Ω output impedance
• operates from a single 2.5V supply
• 8 pin tape on reel
• Pb-free and RoHS Compliant
Applications
• VCO for the GS1560, GS1559 and GS9060
Deserializers, and the GS1532, GS1531 and
GS9062 Serializers
Description
The GO1525 is a self contained, miniature Voltage
Controlled Oscillator (VCO). It produces a clean
VCTR
GO1525 HD-LINX™II
Voltage Controlled Oscillator
GO1525 Data Sheet
1.485GHz reference clock signal for the GS1560 and
GS9060 deserializers, and for the GS1532 and
GS9062 serializers. The control voltage range is from
1.0 volts to 1.5 volts and is derived from the on-chip
PLLs. The GO1525 frequency can be pulled
approximately 32MHz for every one volt of control.
The output level is typically -9.0dBm with low spurious
and noise content. It is designed to drive 50Ω strip lines.
The VCO requires a single 2.5V supply and draws a
maximum of 15mA of current. It is packaged in a
miniature 8-pin proprietary surface mount package and
operates over the normal commercial temperature
range of 0°C to +70°C.
This component and all homogeneous subcomponents
are RoHS compliant.
VCC
STRIPLINE
STRIPLINE
OSCILLATOR CIRCUIT
OUT
GND
GO1525 Functional Block Diagram
21969 - 8 July 2005
1 of 9
www.gennum.com

line_dark_gray
GS1525 equivalent
3. Soldering Recommendations
GO1525 Data Sheet
The device is manufactured with Matte-Sn terminations and is compatible with both
standard eutectic and Pb-free solder reflow profiles. The recommended standard
eutectic reflow profile is shown in Figure 3-1. The maximum recommended Pb-free
reflow profile is shown in Figure 3-2.
Temperature
230˚C
220˚C
183˚C
150˚C
3˚C/sec max
60-150 sec.
10-20 sec.
6˚C/sec max
100˚C
25˚C
120 sec. max
6 min. max
Figure 3-1: Standard Eutectic Solder Reflow Profile
Temperature
260˚C
250˚C
217˚C
200˚C
150˚C
3˚C/sec max
60-150 sec.
20-40 sec.
Time
6˚C/sec max
25˚C
60-180 sec. max
8 min. max
Figure 3-2: Maximum Pb-free Solder Reflow Profile
21969 - 8 July 2005
Time
5 of 9


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for GS1525 electronic component.


Information Total 9 Pages
Link URL [ Copy URL to Clipboard ]
Download [ GS1525.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
GS1522The function is HDTV Serial Digital Serializer. Gennum CorporationGennum Corporation
GS1524The function is HD-LINX-TM II Multi-Rate SDI Adaptive Cable Equalizer. Gennum CorporationGennum Corporation
GS1524AThe function is Adaptive Cable Equalizer. Gennum CorporationGennum Corporation

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

GS15     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search