|
|
Número de pieza | 1N4936 | |
Descripción | (1N4933 - 1N4937) CURRENT 1.0 Ampere | |
Fabricantes | DEC | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de 1N4936 (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
No Preview Available ! www.DataSheet4U.com
1N4933 THRU 1N4937
Features
· Plastic package has Underwrites Laboratory Flammability
Classification 94V-0
· Fast switching speed
· Construction utilizes void-free molded plastic technique
· 1.0A operation at TA=75 with to terminal runaway
· High temperature soldering guaranteed : 250 /10 seconds,
0.375"(9.5mm) lead length, 5 lbs.(2.3kg) tension.
CURRENT 1.0 Ampere
VOLTAGE 50 to 600 Volts
DO-41
0.107(2.7)
0.080(2.0)
DIA.
1.0(25.4)
MIN.
Mechanical Data
· Case : JEDEC DO-41 molded plastic body
· Terminals : Plated axial lead solderable per MIL-STD-750,
method 2026
· Polarity : Color band denotes cathode end
· Mounting Position : Any
· Weight : 0.012 ounce, 0.34 gram
0.205(5.2)
0.166(4.2)
0.034(0.9)
0.028(0.7)
DIA.
1.0(25.4)
MIN.
Dimensions in inches and (millimeters)
Maximum Ratings And Electrical Characteristics
(Ratings at 25 ambient temperature unless otherwise specified, Single phase, half wave 60Hz, resistive or inductive
load. For capacitive load, derate by 20%)
Maximum recurrent peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current
0.375"(9.5mm) lead length TA=75
Peak forward surge current 8.3ms single
half sine-wave superimposed on rated load
(JEDEC method) at TA=75
Maximum instantaneous forward voltage
at 1.0A
Maximum DC reverse current at rated DC
blocking voltage
Maximum full load reverse current full cycle
average. 0.375"(9.5mm) lead length at
TL=55
Maximum reverse recovery time (Note 1)
Typical junction capacitance (Note 2)
Operating junction and storage
temperature range
Symbols
VRRM
VRMS
VDC
I(AV)
1N4933 1N4934 1N4935 1N4936 1N4937
50 100 200 400 600
35 70 140 280 420
50 100 200 400 600
1.0
IFSM 30.0
VF 1.3
5.0
IR
100
Trr 150
CJ 15.0
TJ
TSTG
-65 to +150
Notes:
(1) Test conditions: IF=1.0A, VR=30V, di/dt=50A/ S, and Irr=10%IRM.
(2) Measured at 1MHz and applied reverse voltage of 4.0 Volts.
Units
Volts
Volts
Volts
Amp
Amps
Volts
A
ns
pF
1 page |
Páginas | Total 2 Páginas | |
PDF Descargar | [ Datasheet 1N4936.PDF ] |
Número de pieza | Descripción | Fabricantes |
1N4930 | TEMPERATURE COMPENSATED ZENER REFERENCE DIODES | Microsemi |
1N4930 | 19.2V LOW NOISE TEMPERATURE COMPENSATED ZENER REFERENCE DIODE | Digitron Semiconductors |
1N4930 | 19.2 VOLT NOMINAL ZENER VOLTAGE + 5% | Compensated Deuices Incorporated |
1N4930 | Diode Zener Single 19.2V 5% 500mW 2-Pin DO-35 | New Jersey Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |