|
|
Número de pieza | ST22T064-A | |
Descripción | Smartcard 32-Bit RISC MCU | |
Fabricantes | STMicroelectronics | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de ST22T064-A (archivo pdf) en la parte inferior de esta página. Total 7 Páginas | ||
No Preview Available ! www.DataSheet4U.com
ST22T064-A
Smartcard 32-Bit RISC MCU with 64 Kbytes EEPROM
& USB 2.0 Full Speed Device Controller
DATA BRIEF
PRODUCT FEATURES
I 32-BIT RISC CPU WITH 24-BIT LINEAR
MEMORY ADDRESSING
I 228 KBYTES USER ROM
I 16 KBYTES USER RAM
I 64 KBYTES USER EEPROM
32-BIT RISC CPU
I DUAL INSTRUCTION SET, JAVACARD™
AND NATIVE
I 4-STAGE PIPELINE
I 16 GENERAL PURPOSE 32-BIT
REGISTERS, AND SPECIAL REGISTERS
I 4 MASKABLE INTERRUPT LEVELS
I SUPERVISOR AND USER MODES
USB 2.0 FULL SPEED DEVICE CONTROLLER
WITH ON CHIP CLOCK RECOVERY
I UP TO 12Mbits/s BANDWIDTH
I 16 DYNAMICALLY CONFIGURABLE
ENDPOINTS
I ALL USB TRANSFER MODES SUPPORTED
I ISO / USB MODE DETECTION
I CCID AND ISO 7816-12 COMPLIANT
SECURITY
I CPU SECURITY INSTRUCTIONS
– Dedicated instructions for DES and Triple
DES implementation
– Dedicated instructions (Multiply and
Accumulate) for efficient implementation
of modular arithmetic and elliptic curves
based cryptosystems
– CRC instruction (ISO 3309 16-bit
Checksum)
I ENCRYPTION CO-PROCESSOR
I CPU DPA/SPA COUNTERMEASURES
I RANDOM NUMBER GENERATOR
I EEPROM FLASH PROGRAMMING MODE
I CLOCK AND POWER MANAGEMENT
I VOLTAGE AND CLOCK FREQUENCY
SENSORS
I ADVANCED MEMORY PROTECTION
– Memory Protection Unit for application
firewalling and peripheral access control
– Domain switching securely controlled by
protected Context Stack
– Native/Java, Code/Data memory
attributes with 128-byte granularity
I FOUR WORKING STACKS
– Java stack with both 16 and 32-bit
accesses
– User and Supervisor mode stacks
– Security Context Stack
Figure 1. Delivery Form
Micromodule
Wafer
SO20
October 2004
For further information contact your local ST sales office.
1/7
7
1 page www.DataSheet4U.com
ST22T064-A
SOFTWARE DEVELOPMENT ENVIRONMENT
Modularity, flexibility and methodology are the key
words for the SmartJ™ Development Tools Plat-
form. Using the same interface, the developers are
able to create, compile and debug a project.
The SmartJ™ Integrated Development environ-
ment (IDE) includes:
– A code Generation chain: C/C++ compiler,
assembler and linker. The assembler supports
both native and JavaCard™ instruction sets.
– An instruction set simulator, a cycle accurate
simulator, a C/C++ source level debugger.
Software and Hardware tools allow to
efficiently generate, then validate all code and
application embbeded softwares for the
SmartJ™ platform.
Figure 3. SmartJ™ IDE
5/7
5 Page |
Páginas | Total 7 Páginas | |
PDF Descargar | [ Datasheet ST22T064-A.PDF ] |
Número de pieza | Descripción | Fabricantes |
ST22T064-A | Smartcard 32-Bit RISC MCU | STMicroelectronics |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |