DataSheet39.com

What is 135D?

This electronic component, produced by the manufacturer "Vishay Siliconix", performs the same function as "Wet Tantalum Capacitors Tantalum-Case".


135D Datasheet PDF - Vishay Siliconix

Part Number 135D
Description Wet Tantalum Capacitors Tantalum-Case
Manufacturers Vishay Siliconix 
Logo Vishay Siliconix Logo 


There is a preview and 135D download ( pdf file ) link at the bottom of this page.





Total 6 Pages



Preview 1 page

No Preview Available ! 135D datasheet, circuit

135D
Vishay
Wet Tantalum Capacitors
Tantalum-Case with Glass-to-Tantalum Hermetic Seal
For - 55 °C to + 200 °C Operation
FEATURES
Terminations : standard Tin/lead (SnPb), 100 %
Tin (RoHS compliant) available
Available
Standard and Extended Ratings
RoHS*
COMPLIANT
Model 135D tantalum-case tantalum electrolytic
capacitors incorporate the advantages of all the varieties of
electrolytic capacitors and eliminate most of the
disadvantages. These units have a 3 volt reverse voltage
capability at + 85 °C and a higher ripple current capability
than any other electrolytic type with similar combinations of
capacitance and case size.
Designed for the aerospace applications, this capacitor
was developed under partial sponsorship of the Marshall
Space Flight Center, National Aeronautics and Space
Administration. The capacitors have a high resistance to
damage from shock and vibration. Extended range ratings
and high temperature designs are available.
Model 135D capacitors are commercial equivalents of
Tansitor Style; AQ, AR, HAQ, HAR, Mallory-NACC Style;
TLT, TXT, THT, THX and Military Style CLR79 and CLR81,
designed to meet the performance requirements of Military
Specification MIL-PRF-39006/22/25. Capacitors to meet
MILPRF- 39006/22/25 should be ordered by part numbers
shown in that specification.
www.DataSheet4U.coPm ERFORMANCE CHARACTERISTICS
Operating Temperature: - 55 °C to + 85 °C.
(To + 200 °C with voltage derating.)
Capacitance Tolerance: At 120 Hz, + 25 °C. ± 20 %
standard. ± 10 %, ± 5 % available as special.
DC Leakage Current (DCL Max.): At + 25 °C and above:
Leakage current shall not exceed the values listed in the
Standard Ratings Tables.
Life Test: Capacitors are capable of withstanding a 2000
hour life test at a temperature of + 85 °C or + 125 °C at the
applicable rated DC working voltage.
Following life test:
1. DCL, measured at + 85 °C rated voltage, shall not be in
excess of the original requirement.
2. The equivalent series resistance shall not exceed 150 %
of the initial requirement.
3. Change in capacitance shall not exceed 10 % from the
initial measurement.
ORDERING INFORMATION
135D
306
X0
MODEL CAPACITANCE CAPACITANCE
TOLERANCE
This is expressed
in picofarads. The
first two digits are
the significant
figures. The third
is the number of
zeros to follow.
X0 = ± 20 %
X9 = ± 10 %
X5 = ± 5 %
006
DC VOLTAGE RATING
AT + 85 °C
This is expressed in volts.
To complete the
three-digit block, zeros
precede the voltage
rating. A decimal point is
indicated by an "R"
(6R3 = 6.3 volts).
C
CASE CODE
See Ratings
and
Case Codes
Table.
2
STYLE NUMBER
Standard
0 = No outer tube.
2 = Outer polyesterfilm
insulation.
High Temperature
8 = No outer tube.
6 = High temperature film
insulation (above + 125 °C).
E3
RoHS COMPLIANT
E3 = 100 % tin
termination (RoHS
compliant design)
Blank = SnPb
termination
(standard design)
Packaging: The use of formed plastic trays for packaging these axial lead components is standard. Tape and reel is not
recommended due to the unit weight.
* Pb containing terminations are not RoHS compliant, exemptions may apply
www.vishay.com
2
For technical questions, contact: [email protected]
Document Number: 40024
Revision: 26-Sep-06

line_dark_gray
135D equivalent
135D
Vishay
Wet Tantalum Capacitors
Tantalum-Case with Glass-to-Tantalum Hermetic Seal
For - 55 °C to + 200 °C Operation
EXTENDED RATINGS
CAPACITANCE CASE
(µF) CODE
PART NUMBER*
Max. ESR
at
+ 25 °C
120 Hz
(Ohms)
Max. IMP.
at
- 55 °C
120 Hz
(Ohms)
Max. DCL (µA)
at
Max. CAPACITANCE CHANGE
(%) at
+ 25 °C
+ 85 °C
+ 125 °C
- 55 °C
+ 85 °C + 125 °C
Max.
RIPPLE
40 kHz
rms
(mA)
35 WVDC at + 85 °C . . . 22 WVDC at + 125 °C . . . 21 WVDC at + 200 °C
39
C 135D396X0035C2
4.1
61
2
6
- 22 +12 +14
820
120
F 135D127X0035F2
2.5
31
3 10 - 40 +13 +15 1315
330
T 135D337X0035T2
1.8
20
6 18 - 50 +16 +25 1640
370
K 135D477X0035K2
1.3
15
9 36 - 60 +25 +30 2040
50 WVDC at + 85 °C . . . 30 WVDC at + 125 °C . . . 30 WVDC at + 200 °C
33
C 135D336X0050C2
5.0
135
2
9
- 29 +10 +12
700
100
F 135D107X0050F2
2.8
49
4 12 - 36 +13 +15 1200
120
F 135D127X0050F2
2.5
49
4 24 - 42 +12 +15 1200
270
T 135D277X0050T2
2.0
30
8 32 - 46 +20 +25 1450
330
K 135D337X0050K2
1.5
30
9 36 - 46 +25 +30 1900
60 WVDC at + 85 °C . . . 40 WVDC at + 125 °C . . . 36 WVDC at + 200 °C
27
C 135D276X0060C2
5.0
144
3
12 - 24 +10 +12 700
82
F 135D826X0060F2
2.9
54
4 16 - 30 +15 +15 1100
100
F 135D107X0060F2
2.5
54
4 20 - 36 +12 +15 1100
220
T 135D227X0060T2
1.8
29
8 32 - 40 +16 +20 1400
270
K 135D277X0060K2
1.4
23
9 36 - 45 +20 +25 1850
75 WVDC at + 85 °C . . . 50 WVDC at + 125 °C . . . 45 WVDC at + 200 °C
22
C 135D226X0075C2
5.1
157
3
12 - 19 +10 +12 600
68
F 135D686X0075F2
3.0
63
4 16 - 25 +12 +15 1000
82
F 135D826X0075F2
2.5
63
4 24 - 30 +12 +15 1000
180
T 135D187X0075T2
2.2
30
9 36 - 35 +16 +20 1300
220
K 135D227X0075K2
1.8
24
10 40 - 40 +20 +25 1800
100 WVDC at + 85 °C . . . 65 WVDC at + 125 °C . . . 60 WVDC at + 200 °C
10
C 135D106X0100C2
5.9
200
3
12 - 17 +10 +12 800
39
F 135D396X0100F2
3.5
80
5 24 - 20 +12 +15 1300
68
T 135D686X0100T2
2.2
40
10 40 - 30 +14 +16 1600
120
K 135D127X0100K2
2.7
30
12 48 - 35 +15 +17 2000
125 WVDC at + 85 °C . . . 85 WVDC at + 125 °C . . . 75 WVDC at + 200 °C
6.8
C 135D685X0125C2 11.7
300
3
12 - 14 +10 +12 700
27
F 135D276X0125F2
3.5
90
5 24 - 18 +12 +15 1200
47
T 135D476X0125T2
2.2
50
10 40 - 26 +14 +16 1500
68
K 135D686X0125K2
2.2
32
11 44 - 28 +15 +16 1850
82
K 135D826X0125K2
2.8
32
12 48 - 30 +15 +17 1900
* Part Numbers listed are for units with ± 20 % capacitance tolerance insulated capacitors. For ± 10 % tolerance capacitors, change the digit
following the letter "X" from "0" to "9"; for ± 5 %, change the digit following the letter "X" from "0" to "5". For capacitors without outer
polyester-film insulation, change the last digit in the part number from "2" to "0". For capacitors with a high temperature insulating sleeve,
change the last digit in the part number from "2" to "6". For RoHS compliant add “E3”.
www.vishay.com
6
For technical questions, contact: [email protected]
Document Number: 40024
Revision: 26-Sep-06


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for 135D electronic component.


Information Total 6 Pages
Link URL [ Copy URL to Clipboard ]
Download [ 135D.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
135-1100The function is Precesion Power Wirewoumd Resistors. RCD ComponentsRCD Components
135-xxxxThe function is Precesion Power Wirewoumd Resistors. RCD ComponentsRCD Components
1351100The function is Precesion Power Wirewoumd Resistors. RCD ComponentsRCD Components

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

135D     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search