ISL1533 Datasheet PDF - Intersil Corporation
| Part Number | ISL1533 | |
| Description | Dual Channel Differential DSL Line Driver | |
| Manufacturers | Intersil Corporation | |
| Logo |  |
|
|
There is a preview and ISL1533 download ( pdf file ) link at the bottom of this page. Total 2 Pages | ||
Preview 1 page No Preview Available !
®
Data Sheet
Dual Channel Differential DSL Line Driver
The ISL1533 is a dual channel differential amplifier designed
for driving full rate ADSL2+ signals at very low power
dissipation. The high drive capability of 450mA makes this
driver ideal for DMT designs. It contains two pairs of
wideband, high-voltage, current mode feedback amplifiers
designed on Intersil’s HS30 Bipolar SOI process for low
power consumption in DSL systems. This process also
provides for very rugged protection against lightning induced
surges on the line.
These drivers achieve an MTPR distortion measurement of
better than 70dB, while consuming typically 5mA per DSL
channel of total supply current. This supply current can be
set using a resistor on the IADJ pin. Two other pins (C0 and
C1) can also be used to adjust supply current to one of four
preset modes (full-IS, 3/4-IS, 1/2-IS, and full power-down).
The ISL1533 integrates 50k pull-up resistors on C0 and C1
pins to initially disable the device.
The ISL1533 operates on ±5V to ±15V supplies and retains
its bandwidth and linearity over the complete supply range.
The device is supplied in a thermally-enhanced
20www.DataSheet4U.com Ld HTSSOP and the small footprint (4mmx5mm) 24 Ld
QFN packages. The ISL1533 is specified for operation over
the full -40°C to +85°C temperature range.
Pinouts
ISL1533IRZ
(24 LD QFN)
TOP VIEW
VINA+ 1
VINB+ 2
GND 3
IADJ 4
NC 5
VINC+ 6
VIND+ 7
THERMAL
PAD
19 VINA-
18 VINB-
17 VOUTB
16 VOUTC
15 VINC-
14 VIND-
13 VOUTD
March 29, 2007
ISL1533
FN6464.0
Features
• 450mA output drive capability
• 44.4VP-P differential output drive into 100Ω
• ±5V to ±15V supply operation
• MTPR of -70dB
• Operates down to supply current of 4mA per port
• Current control pins
• Channel separation
- 80dB @ 500kHz
• High ESD protection from lightning induced transients
• Pb-free plus anneal available (RoHS compliant)
• Surpasses GR1089, ANSI, and ETSI requirements
Applications
• Dual port ADSL2+ line drivers
• HDSL line drivers
Get Full Datasheet
ISL1533IVEZ
(20 LD HTSSOP)
TOP VIEW
C0AB 1
20 VS-
C1AB 2
19 VOUTA
VINA+ 3
18 VINA-
VINB+ 4
17 VINB-
GND 5
IADJ 6
THERMAL
PAD
16 VOUTB
15 VOUTC
VINC+ 7
14 VINC-
VIND+ 8
13 VIND-
C1CD 9
12 VOUTD
C0CD 10
11 VS+
1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2007. All Rights Reserved.
All other trademarks mentioned are the property of their respective owners.
|
| |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for ISL1533 electronic component. |
| Information | Total 2 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ ISL1533.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| ISL1532 | The function is Dual Channel Differential DSL Line Driver. Intersil Corporation | |
| ISL1532A | The function is Dual Channel Fixed Gain Differential DSL Line Driver. Intersil Corporation | |
| ISL1533 | The function is Dual Channel Differential DSL Line Driver. Intersil Corporation | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
ISL1
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||