|
|
Número de pieza | SY58034U | |
Descripción | 1:6 CML FANOUT BUFFER | |
Fabricantes | Micrel Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de SY58034U (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
No Preview Available ! Micrel
6GHz, 1:6 CML FANOUT BUFFER
w/ 2:1 MUX INPUT AND
INTERNAL I/O TERMINATION
Precision Edge™
Precision ESdYg5e8™034U
SY58034U
FEATURES
s Provides six (6) ultra-low skew copies of the
selected input
s 2:1 MUX input included for clock switchover
applications
s Guaranteed AC performance over temperature and
voltage:
• Clock frequency range: DC to > 6GHz
• < 290ps IN-to-OUT tpd
• < 60ps tr / tf times
• < 20ps skew (output-to-output)
s Ultra low-jitter design:
• < 1psrms random jitter
• < 10pspp total jitter (clock)
• < 1psrms cycle-to-cycle jitter
• < 0.7psrms crosstalk-induced jitter
s Low supply voltage operation: 2.5V and 3.3V
Precision Edge™
DESCRIPTION
The SY58034U is a 2.5V/3.3V precision, high-speed 1:6
fanout buffer capable of handling clocks up to 6GHz. A
differential 2:1 MUX input is included for redundant clock
switchover applications.
The differential input includes Micrel’s unique, 3-pin input
termination architecture that allows the device to interface
to any differential signal (AC- or DC-coupled) as small as
100mV without any level shifting or termination resistor
networks in the signal path. The outputs are 50Ω source
terminated CML, with extremely fast rise/fall times
guaranteed to be less than 60ps.
s Unique input termination and VT pin accepts DC-
The SY58034U operates from a 2.5V ±5% supply or a
coupled and AC-coupled inputs (CML, PECL, LVDS) 3.3V ±10% supply and is guaranteed over the full industrial
s Unique input isolation design minimizes crosstalk
temperature range of –40°C to +85°C. For applications that
s Internal 50Ω output source termination
require LVPECL outputs, consider the SY58035U or
SY58036Uwww.DataSheet4U.com Multiplexers. The SY58034U is part of Micrel’s
s 400mV CML output swing (RL = 50Ω)
high-speed, Precision Edge™ product line.
s –40°C to +85°C temperature range
All support documentation can be found on Micrel’s web
s Available in 32-pin (5mm × 5mm) MLF™ package
site at www.micrel.com.
APPLICATIONS
s Redundant clock distribution
s All SONET/SDH clock distribution
s All Fibre Channel distribution
s All Gigabit Ethernet clock distribution
Precision Edge is a trademark of Micrel, Inc.
MicroLeadFrame and MLF are trademarks of Amkor Technology, Inc.
M9999-031604
[email protected] or (408) 955-1690
FUNCTIONAL BLOCK DIAGRAM
IN0
50Ω
VT0
50Ω
/IN0
VREF-AC0
IN1
50Ω
VT1
50Ω
/IN1
VREF-AC1
SEL
(TTL/CMOS)
2:1 MUX
0
MUX
1S
1:6 Fanout
Q0
/Q0
Q1
/Q1
Q2
/Q2
Q3
/Q3
Q4
/Q4
Q5
/Q5
Rev.: A Amendment: /0
1 Issue Date: March 2004
1 page Micrel
Precision Edge™
SY58034U
AC ELECTRICAL CHARACTERISTICS(8)
VCC = 2.5V ±5% or 3.3V ±10%; TA= –40°C to 85°C, RL= 100Ω across each output pair, or equivalent, unless otherwise stated.
Symbol
Parameter
Condition
Min Typ Max
fMAX
tpd
Maximum Operating Frequency
Differential Propagation Delay
(IN0 or IN1-to-Q)
Clock VOUT ≥ 200mV
6 7.5
140 220 290
Units
GHz
ps
(SEL-to-Q)
∆tpd Tempco Differential Propagation Delay
Temperature Coefficient
100 200 400
ps
65 fs/°C
tSKEW
tJITTER
tr, tf
Output-to-Output Note 9
Part-to-Part Note 10
Clock
Cycle-to-Cycle Jitter Note 11
Random Jitter (RJ) Note 12
Total Jitter (TJ) Note 13
Adjacent Channel Note 14
Crosstalk-Induced Jitter
Output Rise/Fall Time
Full swing, 20% to 80%
20 ps
100 ps
1 psrms
1 psrms
10 pspp
0.7 psrms
20 60 ps
Notes:
8. High frequency AC electricals are guaranteed by design and characterization.
9. Output-to-output skew is measured between outputs under identical input conditions.
10. Part-to-part skew is defined for two parts with identical power supply voltages at the same temperature and with no skew of the edges at the
respective inputs.
11. Cycle-to-cycle jitter definition: the variation of periods between adjacent cycles, Tn–Tn–1 where T is the time between rising edges of the output
signal.
12. Random jitter is measured with a K28.7 comma detect character pattern, measured at 2.5Gbps to 3.2Gbps.
13. Total jitter definition: with an ideal clock input of frequency ≤ fMAX, no more than one output edge in 1012 output edges will deviate by more than the
specified peak-to-peak jitter value.
14. Crosstalk is measured at the output while applying two similar clock frequencies that are asynchronous with respect to each other at the inputs.
SINGLE-ENDED AND DIFFERENTIAL SWINGS
VIN,
VOUT
400mV (Typ.)
Figure 1a. Single-Ended Voltage Swing
VDIFF_IN,
VDIFF_OUT 800mV (Typ.)
Figure 1b. Differential Voltage Swing
M9999-031604
[email protected] or (408) 955-1690
5
5 Page Micrel
32 LEAD MicroLeadFrame™ (MLF-32)
Precision Edge™
SY58034U
Package
EP- Exposed Pad
Die
Rev. 01
CompSide Island
Heat Dissipation
Heat Dissipation
Heavy Copper Plane
Heavy Copper Plane
VEE
VEE
PCB Thermal Consideration for 32-Pin MLF™ Package
(Always solder, or equivalent, the exposed pad to the PCB)
Package Notes:
1. Package meets Level 2 qualification.
2. All parts are dry-packaged before shipment.
3. Exposed pads must be soldered to a ground for proper thermal management.
MICREL, INC. 1849 FORTUNE DRIVE SAN JOSE, CA 95131 USA
TEL + 1 (408) 944-0800 FAX + 1 (408) 944-0970 WEB http://www.micrel.com
The information furnished by Micrel in this data sheet is believed to be accurate and reliable. However, no responsibility is assumed by Micrel for its use.
Micrel reserves the right to change circuitry and specifications at any time without notification to the customer.
Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can
reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into
the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser’s
use or sale of Micrel Products for use in life support appliances, devices or systems is at Purchaser’s own risk and Purchaser agrees to fully indemnify
Micrel for any damages resulting from such use or sale.
© 2004 Micrel, Incorporated.
M9999-031604
[email protected] or (408) 955-1690
11
11 Page |
Páginas | Total 11 Páginas | |
PDF Descargar | [ Datasheet SY58034U.PDF ] |
Número de pieza | Descripción | Fabricantes |
SY58034U | 1:6 CML FANOUT BUFFER | Micrel Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |