GP1S092HCPI Datasheet PDF - Sharp Electrionic
Part Number | GP1S092HCPI | |
Description | Surface Mount Type Photointerrupter | |
Manufacturers | Sharp Electrionic | |
Logo | ||
There is a preview and GP1S092HCPI download ( pdf file ) link at the bottom of this page. Total 5 Pages |
Preview 1 page No Preview Available ! www.DataSheet4U.com
GP1S092HCPI
GP1S092HCPI
Subminiature, Surface
Mount Type Photointerrupter
s Features
1. Subminiature, transmissive type (4.5×2.6×2.9mm)
2. Surface mount type
3. Wide gap (Gap width : 2mm)
4. Slit width (Detector side) : 0.3mm
5. Tape-packaged product
s Applications
1. Cameras
2. CD-ROM drives
3. VCR
s Absolute Maximum Ratings
(Ta=25°C)
Parameter
Symbol Rating Unit
Forward current
IF
50 mA
Input Reverse voltage
VR
6
V
Power dissipation
P
75 mW
Collector-emitter voltage VCEO
35
V
Emitter-collector voltage VECO
6
V
Output
Collector current
IC
20 mA
Collector power dissipation PC
75 mW
Total power dissipation Ptot
100 mW
Operating temperature Topr −25 to +85 °C
Storage temperature Tstg −40 to +100 °C
*1 Soldering temperature Tsol 260 °C
*1 For MAX. 5s
s Outline Dimensions
(Unit : mm)
Internal connection diagram
φ1.2MAX.
2
1
(C0.3)
1 Anode
2 Collector
3 Emitter
4 Cathode
34
4.5±0.1
2−+00..12
2.6±0.1
(C0.4)
a-a' section
(0.3)
Slit width
Center of
light path
(C0.3)
0.5−+00..21
3.4
0.4
*2
R0.6±0.1
34
21
1.2±0.05
❈ Unspecified tolerance : ±0.2mm
❈ ( ) : Reference dimensions
❈ The dimensions indicated by *refer
to those measured from the lead
base.
❈ Burr’s dimensions : 0.15MAX.
Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Internet Internet address for Electronic Components Group http://www.sharp.co.jp/ecg/
|
|
Application Circuits
NOTICE
qThe circuit application examples in this publication are provided to explain representative applications of
SHARP devices and are not intended to guarantee any circuit design or license any intellectual property
rights. SHARP takes no responsibility for any problems related to any intellectual property right of a
third party resulting from the use of SHARP's devices.
qContact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
SHARP reserves the right to make changes in the specifications, characteristics, data, materials,
structure, and other contents described herein at any time without notice in order to improve design or
reliability. Manufacturing locations are also subject to change without notice.
qObserve the following points when using any devices in this publication. SHARP takes no responsibility
for damage caused by improper use of the devices which does not meet the conditions and absolute
maximum ratings to be used specified in the relevant specification sheet nor meet the following
conditions:
(i) The devices in this publication are designed for use in general electronic equipment designs such as:
--- Personal computers
--- Office automation equipment
--- Telecommunication equipment [terminal]
--- Test and measurement equipment
--- Industrial control
--- Audio visual equipment
--- Consumer electronics
(ii)Measures such as fail-safe function and redundant design should be taken to ensure reliability and
safety when SHARP devices are used for or in connection with equipment that requires higher
reliability such as:
--- Transportation control and safety equipment (i.e., aircraft, trains, automobiles, etc.)
--- Traffic signals
--- Gas leakage sensor breakers
--- Alarm equipment
--- Various safety devices, etc.
(iii)SHARP devices shall not be used for or in connection with equipment that requires an extremely
high level of reliability and safety such as:
--- Space applications
--- Telecommunication equipment [trunk lines]
--- Nuclear power control equipment
--- Medical and other life support equipment (e.g., scuba).
qContact a SHARP representative in advance when intending to use SHARP devices for any "specific"
applications other than those recommended by SHARP or when it is unclear which category mentioned
above controls the intended use.
qIf the SHARP devices listed in this publication fall within the scope of strategic products described in the
Foreign Exchange and Foreign Trade Control Law of Japan, it is necessary to obtain approval to export
such SHARP devices.
qThis publication is the proprietary product of SHARP and is copyrighted, with all rights reserved. Under
the copyright laws, no part of this publication may be reproduced or transmitted in any form or by any
means, electronic or mechanical, for any purpose, in whole or in part, without the express written
permission of SHARP. Express written permission is also required before any use of this publication
may be made by a third party.
qContact and consult with a SHARP representative if there are any questions about the contents of this
publication.
115
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for GP1S092HCPI electronic component. |
Information | Total 5 Pages | |
Link URL | [ Copy URL to Clipboard ] | |
Download | [ GP1S092HCPI.PDF Datasheet ] |
Share Link :
Electronic Components Distributor
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
Part Number | Description | MFRS |
GP1S092HCPI | The function is Surface Mount Type Photointerrupter. Sharp Electrionic | |
GP1S092HCPIF | The function is Compact Transmissive Photointerrupter. Sharp Electrionic | |
Semiconductors commonly used in industry:
1N4148 |  
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
GP1S
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA |