DataSheet39.com

What is GS88118B?

This electronic component, produced by the manufacturer "GSI", performs the same function as "(GS88118B - GS88136B) Sync Burst SRAMs".


GS88118B Datasheet PDF - GSI

Part Number GS88118B
Description (GS88118B - GS88136B) Sync Burst SRAMs
Manufacturers GSI 
Logo GSI Logo 


There is a preview and GS88118B download ( pdf file ) link at the bottom of this page.





Total 30 Pages



Preview 1 page

No Preview Available ! GS88118B datasheet, circuit

www.DataSheet4U.com
GS88118B(T/D)/GS88132B(T/D)/GS88136B(T/D)
100-pin TQFP & 165-bump BGA 512K x 18, 256K x 32, 256K x 36
Commercial Temp
Industrial Temp
9Mb Sync Burst SRAMs
333 MHz150 MHz
2.5 V or 3.3 V VDD
2.5 V or 3.3 V I/O
Flow Through/Pipeline Reads
Features
The function of the Data Output register can be controlled by
• IEEE 1149.1 JTAG-compatible Boundary Scan
• 2.5 V or 3.3 V +10%/–10% core power supply
• 2.5 V or 3.3 V I/O supply
• LBO pin for Linear or Interleaved Burst mode
• Internal input resistors on mode pins allow floating mode pins
the user via the FT mode pin (Pin 14). Holding the FT mode
pin low places the RAM in Flow Through mode, causing
output data to bypass the Data Output Register. Holding FT
high places the RAM in Pipeline mode, activating the rising-
edge-triggered Data Output Register.
• Byte Write (BW) and/or Global Write (GW) operation
SCD Pipelined Reads
• Internal self-timed write cycle
The GS88118B(T/D)/GS88132B(T/D)/GS88136B(T/D) is a
• Automatic power-down for portable applications
SCD (Single Cycle Deselect) pipelined synchronous SRAM.
• JEDEC-standard 100-lead TQFP and 165-bump BGA
DCD (Dual Cycle Deselect) versions are also available. SCD
packages
SRAMs pipeline deselect commands one stage less than read
• RoHS-compliant 100-lead TQFP and 165-bump BGA
commands. SCD RAMs begin turning off their outputs
packages available
immediately after the deselect command has been captured in
the input registers.
Functional Description
Byte Write and Global Write
Applications
Byte write operation is performed by using Byte Write enable
The GS88118B(T/D)/GS88132B(T/D)/GS88136B(T/D) is a
(BW) input combined with one or more individual byte write
9,437,184-bit high performance synchronous SRAM with a 2- signals (Bx). In addition, Global Write (GW) is available for
bit burst address counter. Although of a type originally
writing all bytes at one time, regardless of the Byte Write
developed for Level 2 Cache applications supporting high
control inputs.
performance CPUs, the device now finds application in
synchronous SRAM applications, ranging from DSP main
store to networking chip set support.
Sleep Mode
Low power (Sleep mode) is attained through the assertion
(High) of the ZZ signal, or by stopping the clock (CK).
Controls
Memory data is retained during Sleep mode.
Addresses, data I/Os, chip enable (E1, E2), address burst
control inputs (ADSP, ADSC, ADV) and write control inputs
(Bx, BW, GW) are synchronous and are controlled by a
positive-edge-triggered clock input (CK). Output enable (G)
and power down control (ZZ) are asynchronous inputs. Burst
cycles can be initiated with either ADSP or ADSC inputs. In
Burst mode, subsequent burst addresses are generated
Core and Interface Voltages
The GS88118B(T/D)/GS88132B(T/D)/GS88136B(T/D)
operates on a 2.5 V or 3.3 V power supply. All input are 3.3 V
and 2.5 V compatible. Separate output power (VDDQ) pins are
used to decouple output noise from the internal circuits and are
3.3 V and 2.5 V compatible.
internally and are controlled by ADV. The burst address
counter may be configured to count in either linear or
interleave order with the Linear Burst Order (LBO) input. The
Burst function need not be used. New addresses can be loaded
on every cycle with no degradation of chip performance.
Paramter Synopsis
-333 -300 -250 -200 -150 Unit
Pipeline
3-1-1-1
Flow Through
2-1-1-1
tKQ
tCycle
Curr (x18)
Curr (x32/x36)
tKQ
tCycle
Curr (x18)
Curr (x32/x36)
2.5 2.5 2.5 3.0 3.8 ns
3.0 3.3 4.0 5.0 6.7 ns
250 230 200 170 140 mA
290 265 230 195 160 mA
4.5 5.0 5.5 6.5 7.5 ns
4.5 5.0 5.5 6.5 7.5 ns
200 185 160 140 128 mA
230 210 185 160 145 mA
Rev: 1.05 11/2005
1/39
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
© 2002, GSI Technology

line_dark_gray
GS88118B equivalent
TQFP Pin Description
Symbol
A0, A1
A
DQA
DQB
DQC
DQD
NC
BW
BA, BB, BC, BD
CK
GW
E1
E2
G
ADV
ADSP, ADSC
ZZ
TMS
TDI
TDO
TCK
FT
LBO
VDD
VSS
VDDQ
Type
I
I
I/O
I
I
I
I
I
I
I
I
I
I
I
I
O
I
I
I
I
I
I
GS88118B(T/D)/GS88132B(T/D)/GS88136B(T/D)
Description
Address field LSBs and Address Counter preset Inputs
Address Inputs
Data Input and Output pins
No Connect
Byte WriteWrites all enabled bytes; active low
Byte Write Enable for DQA, DQB Data I/Os; active low
Clock Input Signal; active high
Global Write EnableWrites all bytes; active low
Chip Enable; active low
Chip Enable; active high
Output Enable; active low
Burst address counter advance enable; active low
Address Strobe (Processor, Cache Controller); active low
Sleep Mode control; active high
Scan Test Mode Select
Scan Test Data In
Scan Test Data Out
Scan Test Clock
Flow Through or Pipeline mode; active low
Linear Burst Order mode; active low
Core power supply
I/O and Core Ground
Output driver power supply
Rev: 1.05 11/2005
5/39
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
© 2002, GSI Technology


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for GS88118B electronic component.


Information Total 30 Pages
Link URL [ Copy URL to Clipboard ]
Download [ GS88118B.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
GS88118The function is (GS88118 / GS88136T) Sync Burst SRAMs. GSIGSI
GS88118AThe function is (GS88118A - GS88136A) Synchronous Burst SRAMs. GSIGSI
GS88118BThe function is (GS88118B - GS88136B) Sync Burst SRAMs. GSIGSI

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

GS88     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search