74LVC1G53 Datasheet PDF - NXP Semiconductors
Part Number | 74LVC1G53 | |
Description | 2-channel analog multiplexer/demultiplexer | |
Manufacturers | NXP Semiconductors | |
Logo | ||
There is a preview and 74LVC1G53 download ( pdf file ) link at the bottom of this page. Total 23 Pages |
Preview 1 page No Preview Available ! www.DataSheet4U.com
74LVC1G53
2-channel analog multiplexer/demultiplexer
Rev. 01 — 10 January 2006
Product data sheet
1. General description
The 74LVC1G53 is a high-performance, low-power, low-voltage, Si-gate CMOS device
that provides superior performance to most advanced CMOS compatible TTL families.
The 74LVC1G53 provides one analog multiplexer/demultiplexer with a digital select
input (S), two independent inputs/outputs (B0 and B1), a common input/output (A) and an
active LOW enable input (E). When pin E is HIGH, the switch is turned off.
The 74LVC1G53 can handle both analog and digital signals.
2. Features
s Wide supply voltage range from 1.65 V to 5.5 V
s Very low ON resistance:
x 7.5 Ω (typical) at VCC = 2.7 V
x 6.5 Ω (typical) at VCC = 3.3 V
x 6 Ω (typical) at VCC = 5 V
s High noise immunity
s ESD protection:
x HBM JESD22-A114-C exceeds 2000 V
x MM JESD22-A115-A exceeds 200 V
x CDM JESD22-C101-C exceeds 1000 V
s CMOS low-power consumption
s Latch-up performance meets requirements of JESD 78 Class I
s Direct interface with TTL levels
s Control inputs accepts voltages up to 5 V
s Multiple package options
s Specified from −40 °C to +85 °C and from −40 °C to +125 °C
|
|
www.DataSheet4U.com
Philips Semiconductors
74LVC1G53
2-channel analog multiplexer/demultiplexer
9. Limiting values
Table 6: Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Voltages are referenced to GND (ground = 0 V).
Symbol Parameter
Conditions
Min
VCC supply voltage
VI input voltage
IIK input clamping
current
VI < −0.5 V or VI > VCC + 0.5
−0.5
[1] −0.5
-
ISK
switch clamping
VI < −0.5 V or VI > VCC + 0.5
-
current
VSW switch voltage
enable and disable mode
−0.5
ISW switch current
VSW = −0.5 V to (VCC + 0.5 V)
-
ICC quiescent supply
current
-
IGND
Tstg
Ptot
ground current
storage temperature
total power
dissipation
Tamb = −40 °C to +125 °C
-
−65
[2] -
Max Unit
+6.5 V
+6.5 V
−50 mA
±50 mA
VCC + 0.5 V
±50 mA
100 mA
−100
+150
300
mA
°C
mW
[1] The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
[2] For VSSOP8 package: above 110 °C the value of Ptot derates linearly with 8 mW/K.
For XSON8 package: above 45 °C the value of Ptot derates linearly with 2.4 mW/K.
10. Recommended operating conditions
Table 7:
Symbol
VCC
VI
VSW
Tamb
∆t/∆V
Recommended operating conditions
Parameter
Conditions
supply voltage
input voltage
switch voltage
enable and disable
mode
ambient temperature
input transition rise and VCC = 1.65 V to 2.7 V
fall rate
VCC = 2.7 V to 5.5 V
Min
1.65
0
[1] 0
−40
[2] 0
[2] 0
Typ
-
-
-
-
-
-
Max
5.5
5.5
VCC
Unit
V
V
V
+125
20
10
°C
ns/V
ns/V
[1] To avoid drawing VCC current out of terminal A when switch current flows in terminal Bn, the voltage drop
across the bidirectional switch must not exceed 0.4 V. If the switch current flows into terminal A, no VCC
current will flow out of terminal Bn. In this case, there is no limit for the voltage drop across the switch.
[2] Applies to control signal levels.
74LVC1G53_1
Product data sheet
Rev. 01 — 10 January 2006
© Koninklijke Philips Electronics N.V. 2006. All rights reserved.
5 of 23
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for 74LVC1G53 electronic component. |
Information | Total 23 Pages | |
Link URL | [ Copy URL to Clipboard ] | |
Download | [ 74LVC1G53.PDF Datasheet ] |
Share Link :
Electronic Components Distributor
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
Part Number | Description | MFRS |
74LVC1G53 | The function is 2-channel analog multiplexer/demultiplexer. NXP Semiconductors | |
74LVC1G57 | The function is Low-power configurable multiple function gate. NXP Semiconductors | |
74LVC1G57 | The function is CONFIGURABLE MULTIPLE-FUNCTION GATE. Diodes | |
Semiconductors commonly used in industry:
1N4148 |  
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
74LV
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA |