|
|
PDF US16MY02AA Data sheet ( Hoja de datos )
| Número de pieza | US16MY02AA | |
| Descripción | DISPLAY MODULE | |
| Fabricantes | FUTABA | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de US16MY02AA (archivo pdf) en la parte inferior de esta página. Total 14 Páginas | ||
|
No Preview Available !
REV:
PAGE:
REVISION DESCRIPTION
APPR:
DATE:
mA - Released.
GRW 6/20/90
oB 4 Changed height dimension from 11.6mm Max. to 12.0mm Max. GRW 8/28/90
.call Converted to new format and edited.
U3 Added Sec. 2.0, Applicable Documents.
t44 Changed 12.0mm max. height dimension to 13.0mm max. due
eeC to a new spacer. Changed 1.5+/-.5mm spacer dimension to
h 2.5mm.
taS6 Changed 132.00 pattern length designation to correct value of
132.40.
.Da Changed operating temperature range.
www www.DataSheet4U.com t4U.comFUTABA CORPORATION
eeOF AMERICA
hSCHAUMBURG, IL.
taSDESIGNED BY:
aJohn Peroutka
CHECKED BY:
ENGINEERING APPROVAL:
MFG & MATERIALS APPROVAL:
w.DCUSTOMER APPROVAL:
wwN/A
QA APPROVAL:
DRAWING TITLE:
PRODUCT SPECIFICATION
PART NUMBER:
US16MY02AA
CUSTOMER NAME / PART NUMBER:
STANDARD PRODUCT
DATE DRAWN:
FILE NAME:
01/17/94
16MY02A.DOC
DATE PRINTED:
SHEET:
01/05/98
1 OF 14
1 page  
3.3 BLOCK DIAGRAM
Figure 2. Block Diagram
FUTABA CORPORATION
OF AMERICA
SCHAUMBURG, IL.
PART NUMBER:
US16MY02AA
DATE PRINTED:
01/05/98
REV:
SHEET:
C
5 OF 14
5 Page 
4.1.2 DIGIT COUNTER
The digit counter control byte requires bits 7,6,5 and 4 to be set to 1100, respectively.
This is used to define the number of character positions to be controlled. This byte is
normally used only during initialization routines. The binary value of the data
corresponding to bits 3 thru 0 determines the actual number of characters to be controlled.
When all 16 characters are to be controlled, bits 3 thru 0 should be set to 0. If less than 16
characters are used, a number corresponding to the actual number of characters to be
controlled should be entered.
For example, if six characters are to be controlled, the full 8 bit byte would be:
11000110
Number of characters (6) to be controlled.
Digit counter control command
Control data byte identifier.
4.1.3 DUTY CYCLE COUNTER CONTROL
The duty cycle control byte requires bits 7,6, and 5 to be set to 111, respectively. The
value of the data corresponding to the remaining bits determines the luminance level of the
display.
The duty cycle control byte contains a five bit numeric field (bits 4 to 0) that allows the
'on' time for all digits to be modified. Luminance levels are available in 1/31 or 3.2% steps.
A binary value of 31 represents maximum luminance, while a value of 0 places the output
drivers into the "off" state and blanks the display.
For example, a binary value of 24 would force the display's luminance level to be 77% of
maximum luminance, and the full 8-bit byte would be:
11111000
Timing data. (a value of 24)
Duty cycle control command.
Control data byte identifier.
FUTABA CORPORATION
OF AMERICA
SCHAUMBURG, IL.
PART NUMBER:
US16MY02AA
DATE PRINTED:
01/05/98
REV:
SHEET:
C
11 OF 14
11 Page | ||
| Páginas | Total 14 Páginas | |
| PDF Descargar | [ Datasheet US16MY02AA.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| US16MY02AA | DISPLAY MODULE | FUTABA |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |