|
|
Número de pieza | IRHM7264SE | |
Descripción | TRANSISTOR N-CHANNEL | |
Fabricantes | IRF | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de IRHM7264SE (archivo pdf) en la parte inferior de esta página. Total 4 Páginas | ||
No Preview Available ! Previous Datasheet
Index
Next Data Sheet
Provisional Data Sheet No. PD-9.1393A
REPETITIVE AVALANCHE AND dv/dt RATED
IRHM7264SE
HEXFET® TRANSISTOR
N-CHANNEL
SINGLE EVENT EFFECT (SEE) RAD HARD
250 Volt, 0.087Ω, (SEE) RAD HARD HEXFET
International Rectifier’s (SEE) RAD HARD technology
HEXFETs demonstrate virtual immunity to SEE fail-
ure. Additionally, under identical pre- and post-radia-
tion test conditions, International Rectifier’s RAD HARD
HEXFETs retain identical electrical specifications up
to 1 x 105 Rads (Si) total dose. No compensation in
gate drive circuitry is required.These devices are also
capable of surviving transient ionization pulses as high
as 1 x 1012 Rads (Si)/Sec, and return to normal opera-
tion within a few microseconds. Since the SEE pro-
cess utilizes International Rectifier’s patented HEXFET
technology, the user can expect the highest quality
and reliability in the industry.
RAD HARD HEXFET transistors also feature all of the
well-established advantages of MOSFETs, such as volt-
age control, very fast switching, ease of paralleling and
temperature stability of the electrical parameters.
They are well-suited for applications such as switch-
ing power supplies, motor controls, inverters, chop-
pers, audio amplifiers and high-energy pulse circuits
in space and weapons environments.
Product Summary
Part Number
BV DSS
IRHM726SE
250V
RDS(on)
0.087Ω
ID
35A*
Features:
s Radiation Hardened up to 1 x 105 Rads (Si)
s Single Event Burnout (SEB) Hardened
s Single Event Gate Rupture (SEGR) Hardened
s Gamma Dot (Flash X-Ray) Hardened
s Neutron Tolerant
s Identical Pre- and Post-Electrical Test Conditions
s Repetitive Avalanche Rating
s Dynamic dv/dt Rating
s Simple Drive Requirements
s Ease of Paralleling
s Hermetically Sealed
s Electrically Isolated
s Ceramic Eyelets
Absolute Maximum Ratings
ID @ VGS = 12V, TC = 25°C
ID @ VGS = 12V, TC = 100°C
IDM
PD @ TC = 25°C
Parameter
Continuous Drain Current
Continuous Drain Current
Pulsed Drain Current
Max. Power Dissipation
Linear Derating Factor
VGS
EAS
IAR
EAR
dv/dt
Gate-to-Source Voltage
Single Pulse Avalanche Energy
Avalanche Current
Repetitive Avalanche Energy
Peak Diode Recovery dv/dt
TJ
TSTG
Operating Junction
Storage Temperature Range
Lead Temperature
Weight
*Notes: See Page 4. ID current limited by pin diameter
To Order
IRHM7264SE
35*
22.8
140
250
2.0
±20
500
35*
25
4.0
-55 to 150
Units
A
W
W/K
V
mJ
A
mJ
V/ns
300 (0.063 in. (1.6mm) from
case for 10 sec.)
9.3 (typical)
oC
g
1 page |
Páginas | Total 4 Páginas | |
PDF Descargar | [ Datasheet IRHM7264SE.PDF ] |
Número de pieza | Descripción | Fabricantes |
IRHM7264SE | TRANSISTOR N-CHANNEL | IRF |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |