DataSheet39.com

What is 16C505?

This electronic component, produced by the manufacturer "Microchip", performs the same function as "8-Bit CMOS Microcontroller".


16C505 Datasheet PDF - Microchip

Part Number 16C505
Description 8-Bit CMOS Microcontroller
Manufacturers Microchip 
Logo Microchip Logo 


There is a preview and 16C505 download ( pdf file ) link at the bottom of this page.





Total 30 Pages



Preview 1 page

No Preview Available ! 16C505 datasheet, circuit

PIC16C505
14-Pin, 8-Bit CMOS Microcontroller
Device included in this Data Sheet:
PIC16C505
High-Performance RISC CPU:
• Only 33 instructions to learn
• Operating speed:
- DC - 20 MHz clock input
- DC - 200 ns instruction cycle
Device
PIC16C505
Memory
Program
1024 x 12
Data
72 x 8
• Direct, indirect and relative addressing modes for
data and instructions
• 12 bit wide instructions
• 8 bit wide data path
• 2-level deep hardware stack
• Eight special function hardware registers
• Direct, indirect and relative addressing modes for
data and instructions
• All single cycle instructions (200 ns) except for
program branches which are two-cycle
Peripheral Features:
• 11 I/O pins with individual direction control
• 1 input pin
• High current sink/source for direct LED drive
• Timer0: 8-bit timer/counter with 8-bit
programmable prescaler
FIGURE 1: PIN DIAGRAM:
PDIP, SOIC, Ceramic Side Brazed
VDD
RB5/OSC1/CLKIN
RB4/OSC2/CLKOUT
RB3/MCLR/VPP
RC5/T0CKI
RC4
RC3
1
2
3
4
5
6
7
14 VSS
13 RB0
12 RB1
11 RB2
10 RC0
9 RC1
8 RC2
Special Microcontroller Features:
• In-Circuit Serial Programming (ICSP™)
• Power-on Reset (POR)
• Device Reset Timer (DRT)
• Watchdog Timer (WDT) with dedicated on-chip
RC oscillator for reliable operation
• Programmable Code Protection
• Internal weak pull-ups on I/O pins
• Wake-up from Sleep on pin change
• Power-saving Sleep mode
• Selectable oscillator options:
- INTRC: Precision internal 4 MHz oscillator
- EXTRC: External low-cost RC oscillator
- XT: Standard crystal/resonator
- HS: High speed crystal/resonator
- LP:
Power saving, low frequency
crystal
CMOS Technology:
• Low-power, high-speed CMOS EPROM
technology
• Fully static design
• Wide operating voltage range (2.5V to 5.5V)
• Wide temperature ranges
- Commercial: 0˚C to +70˚C
- Industrial: -40˚C to +85˚C
- Extended: -40˚C to +125˚C
- < 1.0 µA typical standby current @ 5V
• Low power consumption
- < 2.0 mA @ 5V, 4 MHz
- 15 µA typical @ 3.0V, 32 kHz for TMR0 run-
ning in SLEEP mode
- < 1.0 µA typical standby current @ 5V
© 1998 Microchip Technology Inc.
Preliminary
DS40192B-page 1

line_dark_gray
16C505 equivalent
2.0 PIC16C505 DEVICE VARIETIES
A variety of packaging options are available.
Depending on application and production
requirements, the proper device option can be
selected using the information in this section. When
placing orders, please use the PIC16C505 Product
Identification System at the back of this data sheet to
specify the correct part number.
2.1 UV Erasable Devices
The UV erasable version, offered in ceramic side
brazed package, is optimal for prototype development
and pilot programs.
The UV erasable version can be erased and
reprogrammed to any of the configuration modes.
Note: Please note that erasing the device will
also erase the pre-programmed internal
calibration value for the internal oscillator.
The calibration value must be saved prior
to erasing the part.
Microchip's PICSTART® PLUS and PRO MATE® II pro-
grammers all support programming of the PIC16C505.
Third party programmers also are available; refer to the
Microchip Third Party Guide for a list of sources.
2.2 One-Time-Programmable (OTP)
Devices
The availability of OTP devices is especially useful for
customers who need the flexibility for frequent code
updates or small volume applications.
The OTP devices, packaged in plastic packages permit
the user to program them once. In addition to the
program memory, the configuration bits must also be
programmed.
PIC16C505
2.3 Quick-Turnaround-Production (QTP)
Devices
Microchip offers a QTP Programming Service for
factory production orders. This service is made
available for users who choose not to program a
medium to high quantity of units and whose code
patterns have stabilized. The devices are identical to
the OTP devices but with all EPROM locations and fuse
options already programmed by the factory. Certain
code and prototype verification procedures do apply
before production shipments are available. Please con-
tact your local Microchip Technology sales office for
more details.
2.4 Serialized Quick-Turnaround
Production (SQTPSM) Devices
Microchip offers a unique programming service where
a few user-defined locations in each device are
programmed with different serial numbers. The serial
numbers may be random, pseudo-random or
sequential.
Serial programming allows each device to have a
unique number which can serve as an entry-code,
password or ID number.
© 1998 Microchip Technology Inc.
Preliminary
DS40192B-page 5


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for 16C505 electronic component.


Information Total 30 Pages
Link URL [ Copy URL to Clipboard ]
Download [ 16C505.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
16C505The function is 8-Bit CMOS Microcontroller. MicrochipMicrochip

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

16C5     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search