DataSheet.es    


Datasheet NCV4279 Equivalent ( PDF )

N.º Número de pieza Descripción Fabricantes Category
1NCV42795.0 V Micropower 150 mA LDO Linear Regulator with DELAY / Adjustable RESET / and Monitor FLAG

NCV4279 5.0 V Micropower 150 mA LDO Linear Regulator with DELAY, Adjustable RESET, and Sense Output The NCV4279 is a 5.0 V precision micropower voltage regulator with an output current capability of 150 mA. The output voltage is accurate within ±2.0% with a maximum dropout voltage of 0.5 V at 100 m
ON
ON		regulator
2NCV4279A5.0V Micropower 150mA LDO Linear Regulator

NCV4279A 5.0 V Micropower 150 mA LDO Linear Regulator with DELAY, Adjustable RESET, and Sense Output The NCV4279A is a 5.0 V precision micropower voltage regulator with an output current capability of 150 mA. The output voltage is accurate within ±2.0% with a maximum dropout voltage of 0.5 V at 10
ON Semiconductor
ON Semiconductor		regulator
3NCV4279BMicropower 150 mA LDO Linear Regulator

NCV4279B 5.0 V Micropower 150 mA LDO Linear Regulator with DELAY, Adjustable RESET, and Monitor FLAG The NCV4279B is a 5.0 V precision micropower voltage regulator. The output current capability is 150 mA. The output voltage is accurate within ±2.0% with a maximum dropout voltage of 0.6 V at 150 mA
ON Semiconductor
ON Semiconductor		regulator
4NCV4279C5.0V Micropower 150mA LDO Linear Regulator

NCV4279C 5.0 V Micropower 150 mA LDO Linear Regulator with DELAY, Adjustable RESET, and Sense Output The NCV4279C is a 5.0 V precision micropower voltage regulator with an output current capability of 150 mA. The output voltage is accurate within ±2.0% with a maximum dropout voltage of 0.5 V at 10
ON Semiconductor
ON Semiconductor		regulator


NCV Datasheet ( Hoja de datos ) - resultados coincidentes

N.º Número de pieza Descripción Fabricantes Catagory
1NCV10092.5 Volt Reference

NCV1009 2.5 Volt Reference The NCV1009 is a precision trimmed 2.5 V ±5.0 mV shunt regulator diode. The low dynamic impedance and wide operating current range enhances its versatility. The tight reference tolerance is achieved by on−chip trimming which minimizes voltage tolerance and temperature d
ON Semiconductor
ON Semiconductor		data
2NCV11171.0 A Low-Dropout Positive Fixed and Adjustable Voltage Regulators

NCP1117, NCV1117 1.0 A Low-Dropout Positive Fixed and Adjustable Voltage Regulators The NCP1117 series are low dropout positive voltage regulators that are capable of providing an output current that is in excess of 1.0 A with a maximum dropout voltage of 1.2 V at 800 mA over temperature. This seri
ON
ON		regulator
3NCV1124Dual Variable Reluctance Sensor Interface IC

NCV1124 Dual Variable−Reluctance Sensor Interface IC The NCV1124 is a monolithic integrated circuit designed primarily to condition signals from sensors used to monitor rotating parts. The NCV1124 is a dual channel device. Each of the two identical channels interfaces with a v
ON Semiconductor
ON Semiconductor		sensor
4NCV1397AHigh Performance Resonant Mode Controller

NCP1397A/B, NCV1397A/B High Performance Resonant Mode Controller with Integrated High-Voltage Drivers The NCP1397 is a high performance controller that can be utilized in half bridge resonant topologies such as series resonant, parallel resonant and LLC resonant converters. It integrates 600 V gat
ON Semiconductor
ON Semiconductor		controller
5NCV1397BHigh Performance Resonant Mode Controller

NCP1397A/B, NCV1397A/B High Performance Resonant Mode Controller with Integrated High-Voltage Drivers The NCP1397 is a high performance controller that can be utilized in half bridge resonant topologies such as series resonant, parallel resonant and LLC resonant converters. It integrates 600 V gat
ON Semiconductor
ON Semiconductor		controller
6NCV1406PFM Step-Up DC-DC Converter

NCP1406, NCV1406 25 V/25 mA PFM Step-Up DC-DC Converter The NCP1406 is a monolithic step−up DC−DC converter operating in a Pulse Frequency Modulation (PFM) scheme with constant peak current control. It integrates a 0.8 A, 0.7 W internal power switch and sensing resistor to monitor inductor curr
ON Semiconductor
ON Semiconductor		converter
7NCV1413High Current Darlington Transistor Arrays

MC1413, MC1413B, NCV1413B High Voltage, High Current Darlington Transistor Arrays The seven NPN Darlington connected transistors in these arrays are well suited for driving lamps, relays, or printer hammers in a variety of industrial and consumer applications. Their high breakdo
ON Semiconductor
ON Semiconductor		transistor



Esta página es del resultado de búsqueda del NCV4279. Si pulsa el resultado de búsqueda de NCV4279 se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin.


nuevas actualizaciones

Número de pieza Descripción Fabricantes PDF
SPS122

Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use.

 Sanken
Sanken		 PDF


DataSheet.es    |   2020    |  Privacy Policy  |  Contacto  |  Sitemap