|
|
Número de pieza | 1417K5A | |
Descripción | NetLight 1417K5A 2.5 Gbits/s 1300 nm Laser Transceiver with Clock and Data Recovery | |
Fabricantes | Agere Systems | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de 1417K5A (archivo pdf) en la parte inferior de esta página. Total 14 Páginas | ||
No Preview Available ! Data Sheet
August 2001
NetLight ® 1417K5A 2.5 Gbits/s
1300 nm Laser Transceiver with Clock and Data Recovery
Applications
s SONET SR OC-48, SDH I-16 applications
s High-speed, optical data interface for shelf-to-shelf
interconnect
Available in a small form factor, RJ-45 size, plastic package,
the 1417K5A Transceiver is a high-performance, cost-effec-
tive, optical transceiver for SONET/SDH applications.
Features
s Small form factor, RJ-45 size, 20-pin package
s LC duplex receptacle
s Uncooled 1300 nm laser transmitter with automatic
output power control
s Transmitter disable input
s Wide dynamic range receiver with InGaAs PIN
photodetector
s Recovered clock outputs
s TTL signal-detect output
s Low power dissipation
s Single 3.3 V power supply
s LVPECL/CML compatible data inputs and CML
compatible data outputs
s Operating temperature range: 0 °C to
70 °C
s Agere Systems Inc. Reliability and Qualification
Program for built-in quality and reliability
Description
The 1417K5A transceiver is a high-speed, cost-effec-
tive optical transceiver intended for 2.488 Gbits/s
shelf-to-shelf optical interconnect applications as well
as SONET SR OC-48 and SDH I-16. The transceiver
features proven Agere Systems optics and is pack-
aged in a narrow-width plastic housing with an LC
duplex receptacle. The receptacle fits into an RJ-45
form factor outline. The 20-pin package pinout con-
forms to a multisource transceiver agreement.
The transmitter features the ability to interface to both
LVPECL and CML differential logic level data inputs.
The transmitter also features a TTL logic level disable
input and laser bias and back-facet monitor outputs.
The receiver features differential CML logic level data
and clock outputs, a TTL logic level signal-detect out-
put and direct access to the PIN photodetector bias
input for photocurrent monitoring purposes.
1 page Data Sheet
August 2001
NetLight 1417K5A 2.5 Gbits/s
1300 nm Laser Transceiver with Clock and Data Recovery
Application Information (continued)
Transceiver Processing
When the process plug is placed in the transceiver's optical port, the transceiver and plug can withstand normal
wave soldering and aqueous spray cleaning processes. However, the transceiver is not hermetic, and should not
be subjected to immersion in cleaning solvents. The transceiver case should not be exposed to temperatures in
excess of 125 °C. The transceiver pins can be wave soldered at 250 °C for up to 10 seconds. The process plug
should only be used once. After removing the process plug from the transceiver, it must not be used again as a
process plug; however, if it has not been contaminated, it can be reused as a dust cover.
Transceiver Optical and Electrical Characteristics
Table 2. Transmitter Optical and Electrical Characteristics (TA = 0 °C to 70 °C; VCC = 3.135 V—3.465 V)
Parameter
Symbol
Min
Max
Unit
Average Optical Output Power (EOL)
Optical Wavelength
Spectral Width
Dynamic Extinction Ratio
Output Optical Eye
Power Supply Current
Input Data Voltage:
Single Ended*
Differential*
Transmit Disable Voltage†
Transmit Enable Voltage†
Laser Bias Voltage
Laser Back-Facet Monitor Voltage
PO
–10.0
–3.0
dBm
λC
1266
1360
nm
∆λRMS
—
4 nm
EXT 8.2 — dB
Compliant with SONET GR-253-CORE and
ITU-T G.957 Eye Mask Requirements
ICCT — 150 mA
VINp-p
VINp-p
VD
VEN
VBIAS
VBF
150
300
VCC – 0.9
VEE
0.0
0.01
800
1600
VCC
VEE + 0.8
0.7
0.2
mVp-p
mVp-p
V
V
V
V
* 50 Ω load, measured single ended. Differential operation is necessary for optimum performance. (See Figure 2 for visual representation.)
† TTL compatible interface.
Agere Systems Inc.
5
5 Page Data Sheet
August 2001
NetLight 1417K5A 2.5 Gbits/s
1300 nm Laser Transceiver with Clock and Data Recovery
Outline Diagrams (continued)
Printed-Wiring Board Layout *, †
Dimensions are in inches and (millimeters).
3.00
(0.118)
A
(2x) ∅ 2.29 MAX
(0.090)
AREA FOR EYELETS
3.00
(0.118)
7.59
(0.299)
6.00
(0.236)
3.08
(0.121)
13.34
(0.525)
(2x) ∅ 1.4 ± 0.1 NOTE 1
(0.055 ± 0.004)
∅ 0.00 M A
4.57
(0.180)
8.89
(0.350)
7.11
(0.280)
(9x) 1.78
(0.070)
16.00 REF
(2x) ∅ 0.81 ± 0.1 (0.630)
(0.032 ± 0.004)
∅ 0.00 M A
2.00 (0.79)
(2x) ∅ 2.29 MAX
(0.090)
2.01
(0.79)
9.59
(0.378)
10.16
(0.400)
3.56
(0.140)
(4x) ∅ 1.4 ± 0.1 NOTE 2
(0.055 ± 0.004)
∅ 0.00 M A
NOTES:
1. HOLES FOR MOUNTING STUDS MUST BE TIED TO CHASSIS GROUND.
2. HOLES FOR HOUSING LEADS MUST BE TIED TO SIGNAL GROUND.
1-1271(F)
* The hatched areas are keep-out areas reserved for housing standoffs. No metal traces of ground connection in keep-out area.
† Twenty-pin module shown; 10-pin module requires only 16 PWB holes.
Agere Systems Inc.
11
11 Page |
Páginas | Total 14 Páginas | |
PDF Descargar | [ Datasheet 1417K5A.PDF ] |
Número de pieza | Descripción | Fabricantes |
1417K5A | NetLight 1417K5A 2.5 Gbits/s 1300 nm Laser Transceiver with Clock and Data Recovery | Agere Systems |
1417K5A | NetLight 1417K5A 2.5 Gbits/s 1300 nm Laser Transceiver with Clock and Data Recovery | Agere Systems |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |