DataSheet39.com

What is 74VHC4046MTC?

This electronic component, produced by the manufacturer "Fairchild Semiconductor", performs the same function as "CMOS Phase Lock Loop".


74VHC4046MTC Datasheet PDF - Fairchild Semiconductor

Part Number 74VHC4046MTC
Description CMOS Phase Lock Loop
Manufacturers Fairchild Semiconductor 
Logo Fairchild Semiconductor Logo 


There is a preview and 74VHC4046MTC download ( pdf file ) link at the bottom of this page.





Total 16 Pages



Preview 1 page

No Preview Available ! 74VHC4046MTC datasheet, circuit

www.DataSheet4U.com
April 1994
Revised October 2003
74VHC4046
CMOS Phase Lock Loop
General Description
The VHC4046 is a low power phase lock loop utilizing
advanced silicon-gate CMOS technology to obtain high fre-
quency operation both in the phase comparator and VCO
sections. This device contains a low power linear voltage
controlled oscillator (VCO), a source follower, and three
phase comparators. The three phase comparators have a
common signal input and a common comparator input. The
signal input has a self biasing amplifier allowing signals to
be either capacitively coupled to the phase comparators
with a small signal or directly coupled with standard input
logic levels. This device is similar to the CD4046 except
that the Zener diode of the metal gate CMOS device has
been replaced with a third phase comparator.
Phase Comparator I is an exclusive OR (XOR) gate. It pro-
vides a digital error signal that maintains a 90 phase shift
between the VCO’s center frequency and the input signal
(50% duty cycle input waveforms). This phase detector is
more susceptible to locking onto harmonics of the input fre-
quency than phase comparator I, but provides better noise
rejection.
Phase comparator III is an SR flip-flop gate. It can be used
to provide the phase comparator functions and is similar to
the first comparator in performance.
Phase comparator II is an edge sensitive digital sequential
network. Two signal outputs are provided, a comparator
output and a phase pulse output. The comparator output is
a 3-STATE output that provides a signal that locks the VCO
output signal to the input signal with 0 phase shift between
them. This comparator is more susceptible to noise throw-
ing the loop out of lock, but is less likely to lock onto har-
monics than the other two comparators.
In a typical application any one of the three comparators
feed an external filter network which in turn feeds the VCO
input. This input is a very high impedance CMOS input
which also drives the source follower. The VCO’s operating
frequency is set by three external components connected
to the C1A, C1B, R1 and R2 pins. An inhibit pin is provided
to disable the VCO and the source follower, providing a
method of putting the IC in a low power state.
The source follower is a MOS transistor whose gate is con-
nected to the VCO input and whose drain connects the
Demodulator output. This output normally is used by tying
a resistor from pin 10 to ground, and provides a means of
looking at the VCO input without loading down modifying
the characteristics of the PLL filter.
Features
s Low dynamic power consumption: (VCC = 4.5V)
s Maximum VCO operating frequency: 12 MHz
(VCC = 4.5V)
s Fast comparator response time (VCC = 4.5V)
Comparator I: 25 ns
Comparator II: 30 ns
Comparator III: 25 ns
s VCO has high linearity and high temperature stability
s Pin and function compatible with the 74HC4046
Ordering Code:
Order Number Package Number
Package Description
74VHC4046M
M16A
16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow
74VHC4046MTC
MTC16
16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
74VHC4046N
N16E
16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide
Surface mount packages are also available on Tape and Reel. Specify by appending the suffix letter Xto the ordering code.
© 2003 Fairchild Semiconductor Corporation DS011675
www.fairchildsemi.com

line_dark_gray
74VHC4046MTC equivalent
Typical Performance Characteristics
Typical Center Frequency
vs R1, C1 VCC = 4.5V
Typical Center Frequency
vs R1, C1 VCC = 6V
Typical Offset Frequency
vs R2, C1 VCC = 4.5V
Typical Offset Frequency
vs R2, C1 VCC = 6V
5 www.fairchildsemi.com


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for 74VHC4046MTC electronic component.


Information Total 16 Pages
Link URL [ Copy URL to Clipboard ]
Download [ 74VHC4046MTC.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
74VHC4046MTCThe function is CMOS Phase Lock Loop. Fairchild SemiconductorFairchild Semiconductor

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

74VH     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search