|
|
PDF 74LVC821APW Data sheet ( Hoja de datos )
| Número de pieza | 74LVC821APW | |
| Descripción | 10-bit D-type flip-flop with 5-volt tolerant inputs/outputs; positive-edge trigger 3-State | |
| Fabricantes | NXP Semiconductors | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de 74LVC821APW (archivo pdf) en la parte inferior de esta página. Total 12 Páginas | ||
|
No Preview Available !
INTEGRATED CIRCUITS
74LVC821A
10-bit D-type flip-flop with 5-volt tolerant
inputs/outputs; positive-edge trigger
(3-State)
Product specification
1998 Sep 25
Philips
Semiconductors
1 page  
Philips Semiconductors
10-bit D-type flip-flop with 5-volt tolerant
inputs/outputs; positive-edge trigger (3-State)
Product specification
74LVC821A
RECOMMENDED OPERATING CONDITIONS
SYMBOL
PARAMETER
VCC
VI
VO
Tamb
tr, tf
DC supply voltage (for max. speed performance)
DC supply voltage (for low-voltage applications)
DC Input voltage range
DC output voltage range; output HIGH or LOW
state
DC output voltage range; output 3-State
Operating ambient temperature range in free-air
Input rise and fall times
CONDITIONS
VCC = 1.2 to 2.7V
VCC = 2.7 to 3.6V
LIMITS
MIN MAX
2.7 3.6
1.2 3.6
0 5.5
0 VCC
0 5.5
–40 +85
0 20
0 10
UNIT
V
V
V
°C
ns/V
ABSOLUTE MAXIMUM RATINGS1
In accordance with the Absolute Maximum Rating System (IEC 134)
Voltages are referenced to GND (ground = 0V)
SYMBOL
PARAMETER
CONDITIONS
RATING
UNIT
VCC DC supply voltage
IIK DC input diode current
VI t0
VI DC input voltage
Note 2
IOK DC output diode current
VO uVCC or VO t 0
DC output voltage; output HIGH or LOW state Note 2
VO DC output voltage; output 3-State
Note 2
–0.5 to +6.5
–50
–0.5 to +6.5
"50
–0.5 to VCC +0.5
–0.5 to 6.5
V
mA
V
mA
V
IO
IGND, ICC
Tstg
PTOT
DC output source or sink current
DC VCC or GND current
Storage temperature range
Power dissipation per package
– plastic mini-pack (SO)
– plastic shrink mini-pack (SSOP and TSSOP)
VO = 0 to VCC
above +70°C derate linearly with 8 mW/K
above +60°C derate linearly with 5.5 mW/K
"50
"100
–65 to +150
500
500
mA
mA
°C
mW
NOTES:
1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the
device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to
absolute-maximum-rated conditions for extended periods may affect device reliability.
2. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
1998 Sep 25
5
5 Page 
Philips Semiconductors
10-bit D-type flip-flop with 5-volt tolerant
inputs/outputs; positive-edge trigger (3-State)
NOTES
Product specification
74LVC821A
1998 Sep 25
11
11 Page | ||
| Páginas | Total 12 Páginas | |
| PDF Descargar | [ Datasheet 74LVC821APW.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| 74LVC821APW | 10-bit D-type flip-flop with 5-volt tolerant inputs/outputs; positive-edge trigger 3-State | NXP Semiconductors |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |