DataSheet39.com

What is 74LVC2G126?

This electronic component, produced by the manufacturer "NXP Semiconductors", performs the same function as "Dual bus buffer/line driver".


74LVC2G126 Datasheet PDF - NXP Semiconductors

Part Number 74LVC2G126
Description Dual bus buffer/line driver
Manufacturers NXP Semiconductors 
Logo NXP Semiconductors Logo 


There is a preview and 74LVC2G126 download ( pdf file ) link at the bottom of this page.





Total 22 Pages



Preview 1 page

No Preview Available ! 74LVC2G126 datasheet, circuit

74LVC2G126
Dual bus buffer/line driver; 3-state
Rev. 12 — 8 April 2013
Product data sheet
1. General description
The 74LVC2G126 is a dual non-inverting buffer/line driver with 3-state outputs. Each
3-state output is controlled by an output enable input (pin nOE). A LOW-level at pin nOE
causes the output to assume a high-impedance OFF-state. Schmitt trigger action at all
inputs makes the circuit highly tolerant of slower input rise and fall times.
Inputs can be driven from either 3.3 V or 5 V devices. This feature allows the use of the
74LVC2G126 as a translator in a mixed 3.3 V and 5 V environment.
It is fully specified for partial power-down applications using IOFF. The IOFF circuitry
disables the output, preventing a damaging backflow current through the device when it is
powered down.
2. Features and benefits
Wide supply voltage range from 1.65 V to 5.5 V
5 V tolerant input/output for interfacing with 5 V logic
High noise immunity
Complies with JEDEC standard:
JESD8-7 (1.65 V to 1.95 V)
JESD8-5 (2.3 V to 2.7 V)
JESD8-B/JESD36 (2.7 V to 3.6 V)
ESD protection:
HBM JESD22-A114F exceeds 2000 V
MM JESD22-A115-A exceeds 200 V
24 mA output drive (VCC = 3.0 V)
CMOS low power consumption
Latch-up performance exceeds 250 mA
Direct interface with TTL levels
Inputs accept voltages up to 5 V
Multiple package options
Specified from 40 C to +85 C and 40 C to +125 C

line_dark_gray
74LVC2G126 equivalent
NXP Semiconductors
74LVC2G126
Dual bus buffer/line driver; 3-state
8. Limiting values
Table 5. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
Symbol Parameter
Conditions
Min Max Unit
VCC supply voltage
IIK input clamping current
VI input voltage
IOK output clamping current
VO output voltage
VI < 0 V
VO > VCC or VO < 0 V
Active mode
Power-down mode
0.5
50
[1] 0.5
-
[1] 0.5
[1][2] 0.5
+6.5
-
+6.5
50
VCC + 0.5
+6.5
V
mA
V
mA
V
V
IO
ICC
IGND
Ptot
output current
supply current
ground current
total power dissipation
VO = 0 V to VCC
Tamb = 40 C to +125 C
-
-
100
[3] -
50
+100
-
300
mA
mA
mA
mW
Tstg storage temperature
65
+150
C
[1] The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
[2] When VCC = 0 V (Power-down mode), the output voltage can be 5.5 V in normal operation.
[3] For TSSOP8 packages: above 55 C the value of Ptot derates linearly at 2.5 mW/K.
For VSSOP8 packages: above 110 C the value of Ptot derates linearly at 8.0 mW/K.
For XSON8 and XQFN8 packages: above 118 C the value of Ptot derates linearly with 7.8 mW/K.
9. Recommended operating conditions
Table 6.
Symbol
VCC
VI
VO
Operating conditions
Parameter
supply voltage
input voltage
output voltage
Tamb
t/V
ambient temperature
input transition rise and fall rate
Conditions
Active mode
VCC = 0 V; Power-down mode
VCC = 1.65 V to 2.7 V
VCC = 2.7 V to 5.5 V
Min Max Unit
1.65 5.5
V
0 5.5 V
0
VCC
V
0 5.5 V
40
+125
C
- 20 ns/V
- 10 ns/V
74LVC2G126
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 12 — 8 April 2013
© NXP B.V. 2013. All rights reserved.
5 of 22


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for 74LVC2G126 electronic component.


Information Total 22 Pages
Link URL [ Copy URL to Clipboard ]
Download [ 74LVC2G126.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
74LVC2G125The function is Dual bus buffer/line driver. NXP SemiconductorsNXP Semiconductors
74LVC2G125The function is Dual bus buffer/line driver. PhilipsPhilips
74LVC2G125The function is DUAL BUFFER GATE. DiodesDiodes

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

74LV     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search